[Sound-open-firmware] Status of Braswell

[Curtis Malainey]

Hey Liam,

Friendly ping to see if there are any updates or if you could point me
in the right direction to help out if possible to get cherrytrail back
on its feet.

On Fri, Aug 30, 2019 at 9:42 AM Curtis Malainey <cujomalainey at google.com> wrote:
>
> I can take a look into the topologies and see if I can get that fixed.
>
> On Fri, Aug 30, 2019 at 8:22 AM Liam Girdwood
> <liam.r.girdwood at linux.intel.com> wrote:
> >
> > On Thu, 2019-08-29 at 19:41 -0500, Pierre-Louis Bossart wrote:
> > > not much better with the 1.3 release...
> > >
> > >     18.483671] sof-audio-acpi 808622A8:00: ipc tx succeeded:
> > > 0x30200000:
> > > GLB_TPLG_MSG: BUFFER_NEW
> > > [   18.483678] sof-audio-acpi 808622A8:00: tplg: ready widget id 25
> > > pipe
> > > 3 type 32 name : PIPELINE.3. stream none
> > > [   18.483685] sof-audio-acpi 808622A8:00: error: widget PIPELINE.3.
> > > refers to non existent widget
> > > [   18.483693] sof-audio-acpi 808622A8:00: error: DSP failed to add
> > > widget id 0 type 32 name : PIPELINE.3. stream none reply 0
> > > [   18.483699] sof-audio-acpi 808622A8:00: ASoC: failed to load
> > > widget
> > > PIPELINE.3.
> > > [   18.483717] sof-audio-acpi 808622A8:00: error: tplg component
> > > load
> > > failed -22
> > > [   18.483729] sof-audio-acpi 808622A8:00: error: failed to load DSP
> > > topology -22
> > > [   18.483734] sof-audio-acpi 808622A8:00: ASoC: failed to probe
> > > component -22
> > > [   18.483766] cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to
> > > instantiate card -22
> > > [   18.483802] cht-bsw-max98090 cht-bsw-max98090:
> > > snd_soc_register_card
> > > failed -22
> > > [   18.483821] cht-bsw-max98090: probe of cht-bsw-max98090 failed
> > > with
> > > error -22
> >
> > Gah, I have an UP. Let me give this a try, looks like topology is out
> > of sync with BYT version....
> >
> > Liam
> >
> >