[Sound-open-firmware] [PATCH 3/3] dt-bindings: dsp: fsl: Add DSP core binding support

Daniel Baluta daniel.baluta at gmail.com
Thu Jul 18 20:24:34 CEST 2019


On Thu, Jul 18, 2019 at 7:41 PM Rob Herring <robh+dt at kernel.org> wrote:
>
> On Thu, Jul 18, 2019 at 9:13 AM Daniel Baluta <daniel.baluta at nxp.com> wrote:
> >
> > This describes the DSP device tree node.
> >
> > Signed-off-by: Daniel Baluta <daniel.baluta at nxp.com>
> > ---
> >  .../devicetree/bindings/dsp/fsl,dsp.yaml      | 87 +++++++++++++++++++
> >  1 file changed, 87 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > new file mode 100644
> > index 000000000000..d112486eda0e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dsp/fsl,dsp.yaml
> > @@ -0,0 +1,87 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/freescale/fsl,dsp.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: NXP i.MX8 DSP core
> > +
> > +maintainers:
> > +  - Daniel Baluta <daniel.baluta at nxp.com>
> > +
> > +description: |
> > +  Some boards from i.MX8 family contain a DSP core used for
> > +  advanced pre- and post- audio processing.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - fsl,imx8qxp-dsp
> > +
> > +  reg:
> > +    description: Should contain register location and length
> > +
> > +  clocks:
> > +    items:
> > +      - description: ipg clock
> > +      - description: ocram clock
> > +      - description: core clock
> > +
> > +  clock-names:
> > +    items:
> > +      - const: ipg
> > +      - const: ocram
> > +      - const: core
> > +
> > +  power-domains:
> > +    description:
> > +      List of phandle and PM domain specifier as documented in
> > +      Documentation/devicetree/bindings/power/power_domain.txt
>
> How many? 4?

Yes, 4 for i.MX8QXP. Also, the same number is for i.MX8QM. Anyhow, I didn't
added added a limit here because I really don't know how many will be
in upcoming
i.MX platforms.

>
> > +
> > +  mboxes:
> > +    description:
> > +      List of <&phandle type channel> - 2 channels for TXDB, 2 channels for RXDB
> > +      (see mailbox/fsl,mu.txt)
> > +    maxItems: 4
> > +
> > +  mbox-names:
> > +    items:
> > +      - const: txdb0
> > +      - const: txdb1
> > +      - const: rxdb0
> > +      - const: rxdb1
> > +
> > +  memory-region:
> > +    description:
> > +       phandle to a node describing reserved memory (System RAM memory)
> > +       used by DSP (see bindings/reserved-memory/reserved-memory.txt)
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - mboxes
> > +  - mbox-names
> > +  - memory-region
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/firmware/imx/rsrc.h>
> > +    #include <dt-bindings/clock/imx8-clock.h>
> > +    dsp at 596e8000 {
> > +        compatbile = "fsl,imx8qxp-dsp";
> > +        reg = <0x596e8000 0x88000>;
> > +        clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
> > +                 <&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
> > +                 <&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
> > +        clock-names = "ipg", "ocram", "core";
> > +        power-domains = <&pd IMX_SC_R_MU_13A>,
> > +                        <&pd IMX_SC_R_MU_13B>,
> > +                        <&pd IMX_SC_R_DSP>,
> > +                        <&pd IMX_SC_R_DSP_RAM>;
> > +        mbox-names = "txdb0", "txdb1", "rxdb0", "rxdb1";
> > +        mboxes = <&lsio_mu13 2 0>, <&lsio_mu13 2 1>, <&lsio_mu13 3 0>, <&lsio_mu13 3 1>;
> > +    };
> > --
> > 2.17.1
> >


More information about the Sound-open-firmware mailing list