[Sound-open-firmware] [PATCH v4 7/7] topology: add DMIC dai support in test capture m4

[Ranjani Sridharan]

Add support for adding DMIC config for DMIC DAI type.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
---
 topology/test/test-capture.m4 | 24 +++++++++++++++++-------
 1 file changed, 17 insertions(+), 7 deletions(-)

diff --git a/topology/test/test-capture.m4 b/topology/test/test-capture.m4
index a1f283f..56fda8f 100644
--- a/topology/test/test-capture.m4
+++ b/topology/test/test-capture.m4
@@ -69,10 +69,20 @@ PCM_CAPTURE_ADD(Passthrough, 3, 0, 0, PIPELINE_PCM_2)
 # TEST_SSP_DATA_BITS bit I2S using TEST_SSP_PHY_BITS bit sample conatiner on SSP TEST_DAI_PORT
 #
 DAI_CONFIG(TEST_DAI_TYPE, TEST_DAI_PORT, TEST_DAI_LINK_NAME,
-	   SSP_CONFIG(TEST_SSP_MODE,
-		      DAI_CLOCK(mclk, TEST_SSP_MCLK, codec_mclk_in),
-		      DAI_CLOCK(bclk, TEST_SSP_BCLK, codec_slave),
-		      DAI_CLOCK(fsync, 48000, codec_slave),
-		      DAI_TDM(2, TEST_SSP_PHY_BITS, 3, 3),
-		      SSP_SAMPLE_BITS(TEST_DAI_TYPE, TEST_DAI_PORT,
-				      TEST_SSP_DATA_BITS)))
+	   ifelse(TEST_DAI_TYPE, `SSP',
+		  SSP_CONFIG(TEST_SSP_MODE,
+			     DAI_CLOCK(mclk, TEST_SSP_MCLK, codec_mclk_in),
+			     DAI_CLOCK(bclk, TEST_SSP_BCLK, codec_slave),
+			     DAI_CLOCK(fsync, 48000, codec_slave),
+			     DAI_TDM(2, TEST_SSP_PHY_BITS, 3, 3),
+			     SSP_SAMPLE_BITS(TEST_DAI_TYPE, TEST_DAI_PORT,
+					     TEST_SSP_DATA_BITS)),
+		  TEST_DAI_TYPE, `DMIC',
+		  DMIC_CONFIG(TEST_DMIC_DRIVER_VERSION,TEST_DMIC_CLK_MIN,
+			      TEST_DMIC_CLK_MAX, TEST_DMIC_DUTY_MIN,
+			      TEST_DMIC_DUTY_MAX, TEST_PDM_ACTIVE,
+			      TEST_DMIC_SAMPLE_RATE, DMIC_WORD_LENGTH(TEST_DAI_FORMAT),
+			      TEST_DAI_TYPE, TEST_DAI_PORT,
+			      PDM_CONFIG(TEST_DAI_TYPE, TEST_DAI_PORT,
+					 LIST(`', PDM_TUPLES(0, 1, 1, 0, 0, 0, 0)))),
+		  `'))
-- 
2.17.0