[Sound-open-firmware] [PATCH 2/7] interrupt: add irq id in IRQ
Rander Wang
rander.wang at linux.intel.com
Fri May 4 10:14:15 CEST 2018
For CNL or later chips, a group of HW IP(like GP-DMA) share
the same IRQ value. Now add id in IRQ to identify each HW interrupt.
If no IRQ shared, call SOF_IRQ to get the IRQ value, and the default
id value would be zero. otherwise call SOF_ID_IRQ to record its id in
IRQ value.
Signed-off-by: Rander Wang <rander.wang at linux.intel.com>
---
src/include/sof/interrupt-map.h | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/src/include/sof/interrupt-map.h b/src/include/sof/interrupt-map.h
index bea567a..cec85df 100644
--- a/src/include/sof/interrupt-map.h
+++ b/src/include/sof/interrupt-map.h
@@ -33,6 +33,7 @@
#include <config.h>
+#define SOF_IRQ_ID_SHIFT 29
#define SOF_IRQ_BIT_SHIFT 24
#define SOF_IRQ_LEVEL_SHIFT 16
#define SOF_IRQ_CPU_SHIFT 8
@@ -41,6 +42,7 @@
#define SOF_IRQ_LEVEL_MASK 0xff
#define SOF_IRQ_BIT_MASK 0x1f
#define SOF_IRQ_CPU_MASK 0xff
+#define SOF_IRQ_ID_MASK 0x7
#define SOF_IRQ(_bit, _level, _cpu, _number) \
(((_bit) << SOF_IRQ_BIT_SHIFT) \
@@ -48,6 +50,18 @@
| ((_cpu) << SOF_IRQ_CPU_SHIFT) \
| ((_number) << SOF_IRQ_NUM_SHIFT))
+/*
+ * for chip CNL or later, a group of HW IP(GP-DMA) share
+ * the same IRQ. So add id in IRQ to identify each HW IP
+ * for this case, it will be 5 levels
+ */
+#define SOF_ID_IRQ(_id, _bit, _level, _cpu, _number) \
+ (((_id) << SOF_IRQ_ID_SHIFT) \
+ | ((_bit) << SOF_IRQ_BIT_SHIFT) \
+ | ((_level) << SOF_IRQ_LEVEL_SHIFT) \
+ | ((_cpu) << SOF_IRQ_CPU_SHIFT) \
+ | ((_number) << SOF_IRQ_NUM_SHIFT))
+
#ifdef CONFIG_IRQ_MAP
/*
* IRQs are mapped on 4 levels.
@@ -65,6 +79,8 @@
(((_bit) >> SOF_IRQ_BIT_SHIFT) & SOF_IRQ_BIT_MASK)
#define SOF_IRQ_CPU(_cpu) \
(((_cpu) >> SOF_IRQ_CPU_SHIFT) & SOF_IRQ_CPU_MASK)
+#define SOF_IRQ_ID(_bit) \
+ (((_bit) >> SOF_IRQ_ID_SHIFT) & SOF_IRQ_ID_MASK)
#else
/*
* IRQs are directly mapped onto a single level, bit and level.
@@ -73,6 +89,7 @@
#define SOF_IRQ_LEVEL(_level) 0
#define SOF_IRQ_BIT(_bit) 0
#define SOF_IRQ_CPU(_cpu) 0
+#define SOF_IRQ_ID(_bit) 0
#endif
#endif
--
2.14.1
More information about the Sound-open-firmware
mailing list