[Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive trigger stop cmd in host

[Liam Girdwood]

On Wed, 2018-05-02 at 09:56 +0000, Jie, Yang wrote:
> > -----Original Message-----
> > From: sound-open-firmware-bounces at alsa-project.org [mailto:sound-open-
> > firmware-bounces at alsa-project.org] On Behalf Of Wu Zhigang
> > Sent: Wednesday, May 2, 2018 5:34 PM
> > To: sound-open-firmware at alsa-project.org
> > Cc: Wu Zhigang <zhigang.wu at linux.intel.com>; Wu, Zhigang
> > <zhigang.wu at intel.com>
> > Subject: [Sound-open-firmware] [PATCH] FIX: Add dma_stop when receive
> > trigger
> > stop cmd in host
> > 
> > when ALSA lib detect xrun issue, it will send stop and start command to DSP
> > without reset. it will hit error in hds_dma_start, if we did not add the
> > dma_stop in
> 
> Small typo. Should be 'hda_dma_start'.
> 
> Others looks good to me.
> 
> 
Can someone confirm on BYT too.

Thanks

Liam
---------------------------------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.