[Sound-open-firmware] [RFC PATCH 3/6] dma: introduce new API for requesting DMAC
rander.wang
rander.wang at linux.intel.com
Tue Jun 5 10:20:10 CEST 2018
On 6/5/2018 12:23 PM, Ranjani Sridharan wrote:
> This patch introduces a new API for procuring DMAC for various
> user based on the type of DMAC, copy direction and other flags for
> share/exclusive access. It defines the necessary DMAC user types,
> copy direction and the flags to suuport the new API.It also adds
> two new members to dma_plat_data to differentiate the
> DMAC based on usage and copy direction.
>
> Finally, it also contains the platform specific implementation
> of the new dma_get() API.
>
> Signed-off-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
> ---
> src/include/sof/dma.h | 26 ++++++++++++++++-
> src/platform/apollolake/dma.c | 53 ++++++++++++++++++++++++++++++++---
> src/platform/baytrail/dma.c | 41 ++++++++++++++++++++++++---
> src/platform/cannonlake/dma.c | 53 ++++++++++++++++++++++++++++++++---
> src/platform/haswell/dma.c | 49 ++++++++++++++++++++++++++------
> 5 files changed, 201 insertions(+), 21 deletions(-)
>
> diff --git a/src/include/sof/dma.h b/src/include/sof/dma.h
> index 1de9efc..25581e6 100644
> --- a/src/include/sof/dma.h
> +++ b/src/include/sof/dma.h
> @@ -48,6 +48,28 @@ enum dma_copy_dir {
> DMA_DIR_DEV_TO_DEV,
> };
>
> +/*
> + * DMAC copy directions
> + * These are used to specify the copy direction while requesting a DMAC
> + */
> +enum dmac_copy_dir {
> + DMAC_DIR_READ = 0,
> + DMAC_DIR_WRITE,
> + DMAC_DIR_DUPLEX,
> +};
> +
> +/* DMAC user types */
> +enum dmac_user {
> + DMAC_USER_HOST_DMA = 0,
> + DMAC_USER_LINK_DMA,
> + DMAC_USER_GP_LP_DMA,
> + DMAC_USER_GP_HP_DMA,
> +};
> +
> +/* DMAC flags */
> +#define DMAC_FLAGS_SHARED 0
> +#define DMAC_FLAGS_EXCLUSIVE (1 << 0)
> +
> /* DMA IRQ types */
> #define DMA_IRQ_TYPE_BLOCK (1 << 0)
> #define DMA_IRQ_TYPE_LLIST (1 << 1)
> @@ -119,6 +141,8 @@ struct dma_ops {
> /* DMA platform data */
> struct dma_plat_data {
> uint32_t id;
> + enum dmac_user type;
> + enum dmac_copy_dir copy_dir;
> uint32_t base;
> uint32_t channels;
> uint32_t irq;
> @@ -139,7 +163,7 @@ struct dma_int {
> uint32_t irq;
> };
>
> -struct dma *dma_get(int dmac_id);
> +struct dma *dma_get(enum dmac_user, enum dmac_copy_dir, int flags);
>
> /* initialize all platform DMAC's */
> void dmac_init(void);
> diff --git a/src/platform/apollolake/dma.c b/src/platform/apollolake/dma.c
> index 001bb67..1ae097e 100644
> --- a/src/platform/apollolake/dma.c
> +++ b/src/platform/apollolake/dma.c
> @@ -112,6 +112,8 @@ static struct dma dma[] = {
> { /* Low Power GP DMAC 0 */
> .plat_data = {
> .id = DMA_GP_LP_DMAC0,
> + .type = DMAC_USER_GP_LP_DMA,
> + .copy_dir = DMAC_DIR_DUPLEX,
> .base = LP_GP_DMA_BASE(0),
> .channels = 8,
> .irq = IRQ_EXT_LP_GPDMA0_LVL5(0, 0),
> @@ -122,6 +124,8 @@ static struct dma dma[] = {
> { /* Low Power GP DMAC 1 */
> .plat_data = {
> .id = DMA_GP_LP_DMAC1,
> + .type = DMAC_USER_GP_LP_DMA,
> + .copy_dir = DMAC_DIR_DUPLEX,
> .base = LP_GP_DMA_BASE(1),
> .channels = 8,
> .irq = IRQ_EXT_LP_GPDMA1_LVL5(0, 0),
> @@ -132,6 +136,8 @@ static struct dma dma[] = {
> { /* Host In DMAC */
> .plat_data = {
> .id = DMA_HOST_IN_DMAC,
> + .type = DMAC_USER_HOST_DMA,
> + .copy_dir = DMAC_DIR_WRITE,
> .base = GTW_HOST_IN_STREAM_BASE(0),
> .channels = 7,
> .irq = IRQ_EXT_HOST_DMA_IN_LVL3(0, 0),
> @@ -142,6 +148,8 @@ static struct dma dma[] = {
> { /* Host out DMAC */
> .plat_data = {
> .id = DMA_HOST_OUT_DMAC,
> + .type = DMAC_USER_HOST_DMA,
> + .copy_dir = DMAC_DIR_READ,
> .base = GTW_HOST_OUT_STREAM_BASE(0),
> .channels = 6,
> .irq = IRQ_EXT_HOST_DMA_OUT_LVL3(0, 0),
> @@ -152,6 +160,8 @@ static struct dma dma[] = {
> { /* Link In DMAC */
> .plat_data = {
> .id = DMA_LINK_IN_DMAC,
> + .type = DMAC_USER_LINK_DMA,
> + .copy_dir = DMAC_DIR_WRITE,
> .base = GTW_LINK_IN_STREAM_BASE(0),
> .channels = 8,
> .irq = IRQ_EXT_LINK_DMA_IN_LVL4(0, 0),
> @@ -162,6 +172,8 @@ static struct dma dma[] = {
> { /* Link out DMAC */
> .plat_data = {
> .id = DMA_LINK_OUT_DMAC,
> + .type = DMAC_USER_LINK_DMA,
> + .copy_dir = DMAC_DIR_READ,
> .base = GTW_LINK_OUT_STREAM_BASE(0),
> .channels = 8,
> .irq = IRQ_EXT_LINK_DMA_OUT_LVL4(0, 0),
> @@ -170,15 +182,48 @@ static struct dma dma[] = {
> .ops = &hda_link_dma_ops,
> },};
>
> -struct dma *dma_get(int dmac_id)
> +/*
> + * get DMAC based on user type, copy dir and flags
> + * "flags" is used to set the type of access requested
> + * (ex: shared/exclusive access)
> + */
> +struct dma *dma_get(enum dmac_user user, enum dmac_copy_dir dir, int flags)
> {
> - int i;
> + int i, ch_count;
> + int dma_index = -1;
> + int min_ch_count = INT32_MAX;
>
> for (i = 0; i < ARRAY_SIZE(dma); i++) {
> - if (dma[i].plat_data.id == dmac_id)
> - return &dma[i];
> +
> + /* check DMAC user type */
> + if (dma[i].plat_data.type != user)
> + continue;
> +
> + /* check DMAC copy dir */
> + if (dma[i].plat_data.copy_dir != dir)
> + continue;
> +
> + /* if exclusive access is requested */
> + if (flags & DMAC_FLAGS_EXCLUSIVE) {
> +
> + /* ret DMA with no channel in use */
> + if (!dma_channel_status(&dma[i]))
> + return &dma[i];
> + } else {
> + /* get number of channels in use */
> + ch_count = dma_channel_status(&dma[i]);
> +
> + /* Use this DMAC if its channel count is lower */
> + if (ch_count < min_ch_count) {
> + dma_index = i;
> + min_ch_count = ch_count;
> + }
> + }
> }
>
> + if (dma_index >= 0)
> + return &dma[dma_index];
> +
> return NULL;
> }
>
> diff --git a/src/platform/baytrail/dma.c b/src/platform/baytrail/dma.c
> index 5a0b650..71ea241 100644
> --- a/src/platform/baytrail/dma.c
> +++ b/src/platform/baytrail/dma.c
> @@ -175,15 +175,48 @@ static struct dma dma[] = {
> #endif
> };
>
> -struct dma *dma_get(int dmac_id)
> +/*
> + * get DMAC based on user type, copy dir and flags
> + * For BYT/CHT, ignore the dmac_user and copy_dir arguments
> + * "flags" is used to set the type of access requested
> + * (ex: shared/exclusive access)
> + */
> +struct dma *dma_get(enum dmac_user user, enum dmac_copy_dir dir, int flags)
> {
> - int i;
> + int i, ch_count;
> + int min_ch_count = INT32_MAX;
> + int dma_index = -1;
>
> for (i = 0; i < ARRAY_SIZE(dma); i++) {
> - if (dma[i].plat_data.id == dmac_id)
> - return &dma[i];
> +
> + /* if exclusive access is requested */
> + if (flags & DMAC_FLAGS_EXCLUSIVE) {
> +
> + /* ret DMA with no channel in use */
> + if (!dma_channel_status(&dma[i]))
> + return &dma[i];
> + } else {
> +
> + /*
> + * for shared access requests, return DMAC
> + * with the least number of channels in use
> + */
> +
> + /* get number of channels in use for this DMAC*/
> + ch_count = dma_channel_status(&dma[i]);
> +
> + /* Use this DMAC if its channel count is lower */
> + if (ch_count < min_ch_count) {
> + dma_index = i;
> + min_ch_count = ch_count;
> + }
> + }
> }
>
> + /* return DMAC */
> + if (dma_index >= 0)
> + return &dma[dma_index];
> +
> return NULL;
> }
>
> diff --git a/src/platform/cannonlake/dma.c b/src/platform/cannonlake/dma.c
> index 9031c17..697b9a8 100644
> --- a/src/platform/cannonlake/dma.c
> +++ b/src/platform/cannonlake/dma.c
> @@ -113,6 +113,8 @@ static struct dma dma[] = {
> { /* Low Power GP DMAC 0 */
> .plat_data = {
> .id = DMA_GP_LP_DMAC0,
> + .type = DMAC_USER_GP_LP_DMA,
> + .copy_dir = DMAC_DIR_DUPLEX,
> .base = LP_GP_DMA_BASE(0),
> .channels = 8,
> .irq = IRQ_EXT_LP_GPDMA0_LVL5(0, 0),
> @@ -123,6 +125,8 @@ static struct dma dma[] = {
> { /* Low Power GP DMAC 1 */
> .plat_data = {
> .id = DMA_GP_LP_DMAC1,
> + .type = DMAC_USER_GP_LP_DMA,
> + .copy_dir = DMAC_DIR_DUPLEX,
> .base = LP_GP_DMA_BASE(1),
> .channels = 8,
> .irq = IRQ_EXT_LP_GPDMA1_LVL5(0, 0),
as we discussed, there are 3 DMACs on CNL, can you help to add it ?
> @@ -133,6 +137,8 @@ static struct dma dma[] = {
> { /* Host In DMAC */
> .plat_data = {
> .id = DMA_HOST_IN_DMAC,
> + .type = DMAC_USER_HOST_DMA,
> + .copy_dir = DMAC_DIR_WRITE,
> .base = GTW_HOST_IN_STREAM_BASE(0),
> .channels = 7,
> .irq = IRQ_EXT_HOST_DMA_IN_LVL3(0, 0),
> @@ -143,6 +149,8 @@ static struct dma dma[] = {
> { /* Host out DMAC */
> .plat_data = {
> .id = DMA_HOST_OUT_DMAC,
> + .type = DMAC_USER_HOST_DMA,
> + .copy_dir = DMAC_DIR_READ,
> .base = GTW_HOST_OUT_STREAM_BASE(0),
> .channels = 9,
> .irq = IRQ_EXT_HOST_DMA_OUT_LVL3(0, 0),
> @@ -153,6 +161,8 @@ static struct dma dma[] = {
> { /* Link In DMAC */
> .plat_data = {
> .id = DMA_LINK_IN_DMAC,
> + .type = DMAC_USER_LINK_DMA,
> + .copy_dir = DMAC_DIR_WRITE,
> .base = GTW_LINK_IN_STREAM_BASE(0),
> .channels = 9,
> .irq = IRQ_EXT_LINK_DMA_IN_LVL4(0, 0),
> @@ -163,6 +173,8 @@ static struct dma dma[] = {
> { /* Link out DMAC */
> .plat_data = {
> .id = DMA_LINK_OUT_DMAC,
> + .type = DMAC_USER_LINK_DMA,
> + .copy_dir = DMAC_DIR_READ,
> .base = GTW_LINK_OUT_STREAM_BASE(0),
> .channels = 7,
> .irq = IRQ_EXT_LINK_DMA_OUT_LVL4(0, 0),
> @@ -171,15 +183,48 @@ static struct dma dma[] = {
> .ops = &hda_link_dma_ops,
> },};
>
> -struct dma *dma_get(int dmac_id)
> +/*
> + * get DMAC based on user type, copy dir and flags
> + * "flags" is used to set the type of access requested
> + * (ex: shared/exclusive access)
> + */
> +struct dma *dma_get(enum dmac_user user, enum dmac_copy_dir dir, int flags)
> {
> - int i;
> + int i, ch_count;
> + int dma_index = -1;
> + int min_ch_count = INT32_MAX;
>
> for (i = 0; i < ARRAY_SIZE(dma); i++) {
> - if (dma[i].plat_data.id == dmac_id)
> - return &dma[i];
> +
> + /* check DMAC user type */
> + if (dma[i].plat_data.type != user)
> + continue;
> +
> + /* check DMAC copy dir */
> + if (dma[i].plat_data.copy_dir != dir)
> + continue;
> +
> + /* if exclusive access is requested */
> + if (flags & DMAC_FLAGS_EXCLUSIVE) {
> +
> + /* ret DMA with no channel in use */
> + if (!dma_channel_status(&dma[i]))
> + return &dma[i];
> + } else {
> + /* get number of channels in use */
> + ch_count = dma_channel_status(&dma[i]);
> +
> + /* Use this DMAC if its channel count is lower */
> + if (ch_count < min_ch_count) {
> + dma_index = i;
> + min_ch_count = ch_count;
> + }
> + }
> }
>
> + if (dma_index >= 0)
> + return &dma[dma_index];
> +
> return NULL;
> }
>
> diff --git a/src/platform/haswell/dma.c b/src/platform/haswell/dma.c
> index 5d1e308..9138e78 100644
> --- a/src/platform/haswell/dma.c
> +++ b/src/platform/haswell/dma.c
> @@ -124,16 +124,49 @@ static struct dma dma[] = {
> .ops = &dw_dma_ops,
> },};
>
> -struct dma *dma_get(int dmac_id)
> +/*
> + * get DMAC based on user type, copy dir and flags
> + * For BYT/CHT, ignore the dmac_user and copy_dir arguments
> + * "flags" is used to set the type of access requested
> + * (ex: shared/exclusive access)
> + */
> +struct dma *dma_get(enum dmac_user user, enum dmac_copy_dir dir, int flags)
> {
> - switch (dmac_id) {
> - case DMA_ID_DMAC0:
> - return &dma[0];
> - case DMA_ID_DMAC1:
> - return &dma[1];
> - default:
> - return NULL;
> + int i, ch_count;
> + int min_ch_count = INT32_MAX;
> + int dma_index = -1;
> +
> + for (i = 0; i < ARRAY_SIZE(dma); i++) {
> +
> + /* if exclusive access is requested */
> + if (flags & DMAC_FLAGS_EXCLUSIVE) {
> +
> + /* ret DMA with no channel in use */
> + if (!dma_channel_status(&dma[i]))
> + return &dma[i];
> + } else {
> +
> + /*
> + * for shared access requests, return DMAC
> + * with the least number of channels in use
> + */
> +
> + /* get number of channels in use for this DMAC*/
> + ch_count = dma_channel_status(&dma[i]);
> +
> + /* Use this DMAC if its channel count is lower */
> + if (ch_count < min_ch_count) {
> + dma_index = i;
> + min_ch_count = ch_count;
> + }
> + }
> }
> +
> + /* return DMAC */
> + if (dma_index >= 0)
> + return &dma[dma_index];
> +
> + return NULL;
> }
>
> /* Initialize all platform DMAC's */
More information about the Sound-open-firmware
mailing list