[Sound-open-firmware] [PATCH] topology: add toplogy for CNL with RT274 codec

[Rander Wang]

Support playback and capture with volume control
at 48KHZ, 24Bit, TDM4 but only 2 channel valid

Signed-off-by: Rander Wang <rander.wang at intel.com>
---
 topology/reef-cnl-rt274.m4 | 70 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 topology/reef-cnl-rt274.m4

diff --git a/topology/reef-cnl-rt274.m4 b/topology/reef-cnl-rt274.m4
new file mode 100644
index 0000000..67aab04
--- /dev/null
+++ b/topology/reef-cnl-rt274.m4
@@ -0,0 +1,70 @@
+#
+# Topology for generic Cannonlake board with RT274
+#
+
+# Include topology builder
+include(`local.m4')
+include(`build.m4')
+
+# Include TLV library
+include(`common/tlv.m4')
+
+# Include Token library
+include(`sof/tokens.m4')
+
+# Include Apollolake DSP configuration
+include(`dsps/bxt.m4')
+
+#
+# Define the pipelines
+#
+# PCM0 ----> volume -----> volume ---->  SSP0
+#
+# PCM1 <---- Volume <---- SSP0
+#
+
+# Low Latency playback pipeline 1 on PCM 0 using max 2 channels of s24le.
+# Schedule 48 frames per 1000us deadline on core 0 with priority 0
+# Use DMAC 0 channel 1 for PCM audio playback data
+PIPELINE_PCM_DAI_ADD(sof/pipe-volume-playback.m4,
+	1, 0, 2, s24le,
+	48, 1000, 0, 0, 0, 1, SSP, 0, s24le, 2)
+
+# Low Latency capture pipeline 2 on PCM 0 using max 2 channels of s24le.
+# Schedule 48 frames per 1000us deadline on core 0 with priority 0
+# Use DMAC 0 channel 2 for PCM audio capture data
+PIPELINE_PCM_DAI_ADD(sof/pipe-volume-capture.m4,
+	2, 0, 2, s24le,
+	48, 1000, 0, 0, 0, 1, SSP, 0, s24le, 2)
+
+#
+# DAI configuration
+#
+# SSP port 0 is our only pipeline DAI
+#
+
+# playback DAI is SSP0 using 2 periods
+# Buffers use s24le format, with 48 frame per 1000us on core 0 with priority 0
+DAI_ADD(sof/pipe-dai-playback.m4,
+	1, SSP, 0,
+	PIPELINE_SOURCE_1, 2, s24le,
+	48, 1000, 0, 0)
+
+# capture DAI is SSP0 using 2 periods
+# Buffers use s24le format, with 48 frame per 1000us on core 0 with priority 0
+DAI_ADD(sof/pipe-dai-capture.m4,
+	2, SSP, 0,
+	PIPELINE_SINK_2, 2, s24le,
+	48, 1000, 0, 0)
+
+# PCM Low Latency
+PCM_DUPLEX_ADD(Passthrough, 3, 0, 0, PIPELINE_PCM_1, PIPELINE_PCM_2)
+
+#
+# BE configurations - overrides config in ACPI if present
+#
+DAI_CONFIG(SSP, 0, SSP0-Codec, DSP_B, 24,
+	DAI_CLOCK(mclk, 24000000, slave),
+	DAI_CLOCK(bclk, 4800000, slave),
+	DAI_CLOCK(fsync, 48000, slave),
+	DAI_TDM(4, 25, 3, 3))
-- 
2.14.1