[Sound-open-firmware] [PATCH 21/21] ASoC: SOF: Add Build support for SOF core and Intel drivers

[Takashi Iwai]

On Tue, 11 Dec 2018 22:30:29 +0100,
Pierre-Louis Bossart wrote:
> 
> --- /dev/null
> +++ b/sound/soc/sof/Kconfig
> @@ -0,0 +1,82 @@
> +config SND_SOC_SOF_PCI
> +	tristate
> +
> +config SND_SOC_SOF_ACPI
> +	tristate
> +
> +config SND_SOC_SOF
> +	tristate "Sound Open Firmware Support"
> +	select SND_SOC_TOPOLOGY
> +	help
> +          This adds support for Sound Open Firmware (SOF). SOF is a free and
> +	  generic open source audio DSP firmware for multiple devices.
> +          Say Y if you have such a device that is supported by SOF.
> +          If unsure select "N".

You can put
  if SND_SOC_SOF
at this point.  This will reduce lots of "depends on SND_SOC_SOF"
lines.

> +config SND_SOC_SOF_NOCODEC
> +	tristate "SOF nocodec mode Support"
> +	depends on SND_SOC_SOF
....
> +source "sound/soc/sof/intel/Kconfig"
> +source "sound/soc/sof/xtensa/Kconfig"

... the endif for SND_SOC_SOF can be put here, then both Kconfigs are
covered by SND_SOC_SOF condition.


OTOH, the usage of if-block below is an overkill.

> --- /dev/null
> +++ b/sound/soc/sof/intel/Kconfig
....
> +if SND_SOC_SOF_HDA_COMMON
> +
> +config SND_SOC_SOF_HDA_LINK
> +	bool "SOF support for HDA Links(HDA/HDMI)"
> +	help
> +          This adds support for HDA links(HDA/HDMI) with Sound Open Firmware
> +		  for Intel(R) platforms.
> +          Say Y if you want to enble HDA links with SOF.
> +          If unsure select "N".
> +
> +if SND_SOC_SOF_HDA_LINK
> +config SND_SOC_SOF_HDA_AUDIO_CODEC
> +	bool "SOF support for HDAudio codecs"
> +	help
> +          This adds support for HDAudio codecs with Sound Open Firmware
> +		  for Intel(R) platforms.
> +          Say Y if you want to enble HDAudio codecs with SOF.
> +          If unsure select "N".
> +endif ## SND_SOC_SOF_HDA_LINK
> +
> +endif ## SND_SOC_SOF_HDA_COMMON

For single items, just use depends on.  It's easier to read.


thanks,

Takashi