[Sound-open-firmware] [PATCH 09/21] ASoC: SOF: Intel: Add Intel specific HDA PCM operations
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Tue Dec 11 22:30:17 CET 2018
From: Liam Girdwood <liam.r.girdwood at linux.intel.com>
Add PCM operations for Intel HDA based DSPs.
Signed-off-by: Keyon Jie <yang.jie at linux.intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood at linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
---
sound/soc/sof/intel/hda-pcm.c | 232 ++++++++++++++++++++++++++++++++++
1 file changed, 232 insertions(+)
create mode 100644 sound/soc/sof/intel/hda-pcm.c
diff --git a/sound/soc/sof/intel/hda-pcm.c b/sound/soc/sof/intel/hda-pcm.c
new file mode 100644
index 000000000000..862283ff02a2
--- /dev/null
+++ b/sound/soc/sof/intel/hda-pcm.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Authors: Liam Girdwood <liam.r.girdwood at linux.intel.com>
+// Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
+// Rander Wang <rander.wang at intel.com>
+// Keyon Jie <yang.jie at linux.intel.com>
+//
+
+/*
+ * Hardware interface for generic Intel audio DSP HDA IP
+ */
+
+#include <sound/hdaudio_ext.h>
+#include <sound/hda_register.h>
+#include <sound/pcm_params.h>
+#include "../ops.h"
+#include "hda.h"
+
+#define SDnFMT_BASE(x) ((x) << 14)
+#define SDnFMT_MULT(x) (((x) - 1) << 11)
+#define SDnFMT_DIV(x) (((x) - 1) << 8)
+#define SDnFMT_BITS(x) ((x) << 4)
+#define SDnFMT_CHAN(x) ((x) << 0)
+
+static inline u32 get_mult_div(struct snd_sof_dev *sdev, int rate)
+{
+ switch (rate) {
+ case 8000:
+ return SDnFMT_DIV(6);
+ case 9600:
+ return SDnFMT_DIV(5);
+ case 11025:
+ return SDnFMT_BASE(1) | SDnFMT_DIV(4);
+ case 16000:
+ return SDnFMT_DIV(3);
+ case 22050:
+ return SDnFMT_BASE(1) | SDnFMT_DIV(2);
+ case 32000:
+ return SDnFMT_DIV(3) | SDnFMT_MULT(2);
+ case 44100:
+ return SDnFMT_BASE(1);
+ case 48000:
+ return 0;
+ case 88200:
+ return SDnFMT_BASE(1) | SDnFMT_MULT(2);
+ case 96000:
+ return SDnFMT_MULT(2);
+ case 176400:
+ return SDnFMT_BASE(1) | SDnFMT_MULT(4);
+ case 192000:
+ return SDnFMT_MULT(4);
+ default:
+ dev_warn(sdev->dev, "can't find div rate %d using 48kHz\n",
+ rate);
+ return 0; /* use 48KHz if not found */
+ }
+};
+
+static inline u32 get_bits(struct snd_sof_dev *sdev, int sample_bits)
+{
+ switch (sample_bits) {
+ case 8:
+ return SDnFMT_BITS(0);
+ case 16:
+ return SDnFMT_BITS(1);
+ case 20:
+ return SDnFMT_BITS(2);
+ case 24:
+ return SDnFMT_BITS(3);
+ case 32:
+ return SDnFMT_BITS(4);
+ default:
+ dev_warn(sdev->dev, "can't find %d bits using 16bit\n",
+ sample_bits);
+ return SDnFMT_BITS(1); /* use 16bits format if not found */
+ }
+};
+
+int hda_dsp_pcm_hw_params(struct snd_sof_dev *sdev,
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct sof_ipc_stream_params *ipc_params)
+{
+ struct hdac_stream *hstream = substream->runtime->private_data;
+ struct hdac_ext_stream *stream = stream_to_hdac_ext_stream(hstream);
+ struct snd_dma_buffer *dmab;
+ int ret;
+ u32 size, rate, bits;
+
+ size = params_buffer_bytes(params);
+ rate = get_mult_div(sdev, params_rate(params));
+ bits = get_bits(sdev, params_width(params));
+
+ hstream->substream = substream;
+
+ dmab = substream->runtime->dma_buffer_p;
+
+ hstream->format_val = rate | bits | (params_channels(params) - 1);
+ hstream->bufsize = size;
+ hstream->period_bytes = params_period_size(params);
+ hstream->no_period_wakeup =
+ (params->info & SNDRV_PCM_INFO_NO_PERIOD_WAKEUP) &&
+ (params->flags & SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP);
+
+ ret = hda_dsp_stream_hw_params(sdev, stream, dmab, params);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: hdac prepare failed: %x\n", ret);
+ return ret;
+ }
+
+ /* disable SPIB, to enable buffer wrap for stream */
+ hda_dsp_stream_spib_config(sdev, stream, HDA_DSP_SPIB_DISABLE, 0);
+
+ /* set host_period_bytes to 0 if no IPC position */
+ if (sdev->hda && sdev->hda->no_ipc_position)
+ ipc_params->host_period_bytes = 0;
+
+ ipc_params->stream_tag = hstream->stream_tag;
+
+ return 0;
+}
+
+int hda_dsp_pcm_trigger(struct snd_sof_dev *sdev,
+ struct snd_pcm_substream *substream, int cmd)
+{
+ struct hdac_stream *hstream = substream->runtime->private_data;
+ struct hdac_ext_stream *stream = stream_to_hdac_ext_stream(hstream);
+
+ return hda_dsp_stream_trigger(sdev, stream, cmd);
+}
+
+snd_pcm_uframes_t hda_dsp_pcm_pointer(struct snd_sof_dev *sdev,
+ struct snd_pcm_substream *substream)
+{
+ struct hdac_stream *hstream = substream->runtime->private_data;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_sof_pcm *spcm = rtd->private;
+ snd_pcm_uframes_t pos = 0;
+
+ if (!sdev->hda->no_ipc_position) {
+ /* read position from IPC position */
+ pos = spcm->stream[substream->stream].posn.host_posn;
+ goto found;
+ }
+
+ /*
+ * DPIB/posbuf position mode:
+ * For Playback, Use DPIB register from HDA space which
+ * reflects the actual data transferred.
+ * For Capture, Use the position buffer for pointer, as DPIB
+ * is not accurate enough, its update may be completed
+ * earlier than the data written to DDR.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ pos = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
+ AZX_REG_VS_SDXDPIB_XBASE +
+ (AZX_REG_VS_SDXDPIB_XINTERVAL *
+ hstream->index));
+ } else {
+ /*
+ * For capture stream, we need more workaround to fix the
+ * position incorrect issue:
+ *
+ * 1. Wait at least 20us before reading position buffer after
+ * the interrupt generated(IOC), to make sure position update
+ * happens on frame boundary i.e. 20.833uSec for 48KHz.
+ * 2. Perform a dummy Read to DPIB register to flush DMA
+ * position value.
+ * 3. Read the DMA Position from posbuf. Now the readback
+ * value should be >= period boundary.
+ */
+ usleep_range(20, 21);
+ snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
+ AZX_REG_VS_SDXDPIB_XBASE +
+ (AZX_REG_VS_SDXDPIB_XINTERVAL *
+ hstream->index));
+ pos = snd_hdac_stream_get_pos_posbuf(hstream);
+ }
+
+ if (pos >= hstream->bufsize)
+ pos = 0;
+
+found:
+ pos = bytes_to_frames(substream->runtime, pos);
+
+ dev_vdbg(sdev->dev, "PCM: stream %d dir %d position %lu\n",
+ hstream->index, substream->stream, pos);
+ return pos;
+}
+
+int hda_dsp_pcm_open(struct snd_sof_dev *sdev,
+ struct snd_pcm_substream *substream)
+{
+ struct hdac_ext_stream *dsp_stream;
+ int direction = substream->stream;
+
+ dsp_stream = hda_dsp_stream_get(sdev, direction);
+
+ if (!dsp_stream) {
+ dev_err(sdev->dev, "error: no stream available\n");
+ return -ENODEV;
+ }
+
+ /* binding pcm substream to hda stream */
+ substream->runtime->private_data = &dsp_stream->hstream;
+ return 0;
+}
+
+int hda_dsp_pcm_close(struct snd_sof_dev *sdev,
+ struct snd_pcm_substream *substream)
+{
+ struct hdac_stream *hstream = substream->runtime->private_data;
+ int direction = substream->stream;
+ int ret;
+
+ ret = hda_dsp_stream_put(sdev, direction, hstream->stream_tag);
+
+ if (ret) {
+ dev_dbg(sdev->dev, "stream %s not opened!\n", substream->name);
+ return -ENODEV;
+ }
+
+ /* unbinding pcm substream to hda stream */
+ substream->runtime->private_data = NULL;
+ return 0;
+}
+
--
2.17.1
More information about the Sound-open-firmware
mailing list