[PATCH v2 2/6] ASoC: amd: yc: Add a module parameter to influence pdm_gain
Jaroslav Kysela
perex at perex.cz
Mon Jan 30 23:26:14 CET 2023
On 30. 01. 23 23:07, Mario Limonciello wrote:
> In case of regressions for any users that the new pdm_gain value is
> too high and for additional debugging, introduce a module parameter
> that would let them configure it.
>
> This parameter should be removed in the future:
> * If it's determined that the parameter is not needed, just hardcode
> the correct value as before
> * If users do end up using it to debug and report different values
> we should introduce a config knob that can have policy set by ucm.
>
> Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>
> ---
> v1->v2:
> * Add a guard for values > 3 to overflow the FIELD_PREP
> * Clear ACP_WOV_GAIN_CONTROL before setting it
> ---
> sound/soc/amd/yc/acp6x-pdm-dma.c | 10 +++++++++-
> sound/soc/amd/yc/acp6x.h | 2 +-
> 2 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/sound/soc/amd/yc/acp6x-pdm-dma.c b/sound/soc/amd/yc/acp6x-pdm-dma.c
> index acecd6a4ec4b1..2bb3ea14bae9c 100644
> --- a/sound/soc/amd/yc/acp6x-pdm-dma.c
> +++ b/sound/soc/amd/yc/acp6x-pdm-dma.c
> @@ -7,6 +7,7 @@
>
> #include <linux/platform_device.h>
> #include <linux/module.h>
> +#include <linux/bitfield.h>
> #include <linux/err.h>
> #include <linux/io.h>
> #include <sound/pcm_params.h>
> @@ -18,6 +19,10 @@
>
> #define DRV_NAME "acp_yc_pdm_dma"
>
> +static int pdm_gain = 3;
> +module_param(pdm_gain, int, 0644);
> +MODULE_PARM_DESC(pdm_gain, "Gain control (0-3)");
> +
> static const struct snd_pcm_hardware acp6x_pdm_hardware_capture = {
> .info = SNDRV_PCM_INFO_INTERLEAVED |
> SNDRV_PCM_INFO_BLOCK_TRANSFER |
> @@ -55,7 +60,10 @@ static void acp6x_enable_pdm_clock(void __iomem *acp_base)
>
> acp6x_writel(pdm_clk_enable, acp_base + ACP_WOV_CLK_CTRL);
> pdm_ctrl = acp6x_readl(acp_base + ACP_WOV_MISC_CTRL);
> - pdm_ctrl |= ACP_WOV_MISC_CTRL_MASK;
> + pdm_ctrl &= FIELD_PREP(ACP_WOV_GAIN_CONTROL, 0);
It should be 'pdm_ctrl &= ~ACP_WOV_GAIN_CONTROL' see include/linux/bitfield.h
(Modify: comment).
> + if (pdm_gain > 3)
> + pdm_gain = 3;
Negative values are not handled. Use clamp(pdm_gain, 0, 3) - see
include/linux/minmax.h.
> + pdm_ctrl |= FIELD_PREP(ACP_WOV_GAIN_CONTROL, pdm_gain);
> acp6x_writel(pdm_ctrl, acp_base + ACP_WOV_MISC_CTRL);
Jaroslav
--
Jaroslav Kysela <perex at perex.cz>
Linux Sound Maintainer; ALSA Project; Red Hat, Inc.
More information about the Alsa-devel
mailing list