[PATCH 4/6] ASoC: amd: renoir: Add a module parameter to influence pdm_gain

[Mario Limonciello]

In case of regressions for any users that the new pdm_gain value is
too high and for additional debugging, introduce a module parameter
that would let them configure it.

Signed-off-by: Mario Limonciello <mario.limonciello at amd.com>
---
 sound/soc/amd/renoir/acp3x-pdm-dma.c | 7 ++++++-
 sound/soc/amd/renoir/rn_acp3x.h      | 2 +-
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/amd/renoir/acp3x-pdm-dma.c b/sound/soc/amd/renoir/acp3x-pdm-dma.c
index 7203c6488df0e..74b70bc4b52fd 100644
--- a/sound/soc/amd/renoir/acp3x-pdm-dma.c
+++ b/sound/soc/amd/renoir/acp3x-pdm-dma.c
@@ -6,6 +6,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/bitfield.h>
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/pm_runtime.h>
@@ -17,6 +18,10 @@
 
 #define DRV_NAME "acp_rn_pdm_dma"
 
+static int pdm_gain = 3;
+module_param(pdm_gain, int, 0644);
+MODULE_PARM_DESC(pdm_gain, "Gain control (0-3)");
+
 static const struct snd_pcm_hardware acp_pdm_hardware_capture = {
 	.info = SNDRV_PCM_INFO_INTERLEAVED |
 		SNDRV_PCM_INFO_BLOCK_TRANSFER |
@@ -80,7 +85,7 @@ static void enable_pdm_clock(void __iomem *acp_base)
 
 	rn_writel(pdm_clk_enable, acp_base + ACP_WOV_CLK_CTRL);
 	pdm_ctrl = rn_readl(acp_base + ACP_WOV_MISC_CTRL);
-	pdm_ctrl |= ACP_WOV_MISC_CTRL_MASK;
+	pdm_ctrl |= FIELD_PREP(ACP_WOV_GAIN_CONTROL, pdm_gain);
 	rn_writel(pdm_ctrl, acp_base + ACP_WOV_MISC_CTRL);
 }
 
diff --git a/sound/soc/amd/renoir/rn_acp3x.h b/sound/soc/amd/renoir/rn_acp3x.h
index c174f84650d24..7d0f4e6a2834d 100644
--- a/sound/soc/amd/renoir/rn_acp3x.h
+++ b/sound/soc/amd/renoir/rn_acp3x.h
@@ -34,7 +34,7 @@
 #define ACP_ERROR_STAT 29
 #define PDM_DECIMATION_FACTOR 0x2
 #define ACP_PDM_CLK_FREQ_MASK 0x07
-#define ACP_WOV_MISC_CTRL_MASK 0x18
+#define ACP_WOV_GAIN_CONTROL	GENMASK(4, 3)
 #define ACP_PDM_ENABLE 0x01
 #define ACP_PDM_DISABLE 0x00
 #define ACP_PDM_DMA_EN_STATUS 0x02
-- 
2.34.1