[PATCH v2 2/8] ASoC: cs42l42: Add SOFT_RESET_REBOOT register
Richard Fitzgerald
rf at opensource.cirrus.com
Thu Jan 19 14:33:02 CET 2023
On 18/1/23 16:41, Pierre-Louis Bossart wrote:
>
>
> On 1/18/23 10:04, Stefan Binding wrote:
>> From: Richard Fitzgerald <rf at opensource.cirrus.com>
>>
>> The SOFT_RESET_REBOOT register is needed to recover CS42L42 state after
>> a Soundwire bus reset.
>
> Humm, you probably want to clarify the terminology, the 'soft reset' is
SOFT_RESET is what the register is called.
> defined in the SoundWire spec as the case where the peripheral device
> loses sync. Bus reset is a Severe Reset, but there's also a Hard Reset.
>
> does this 'SOFT_RESET_REBOOT' need to be accessed when there's a soft
> reset, or only after a Severe/Hard Reset?
>
After a bus(severe)-reset or a forced(hard)-reset, but the code in
driver/soundwire doesn't issue FORCE_RESET so there's no need to handle
that. If there was some reason to have the core SoundWire code issue
FORCE_RESET it would also need to add a callback to all clients so they
can do any special handling.
From the datasheet:
"After a FORCE_RESET, the master must issue a reboot command (set
SFT_RST_REBOOT; see
p. 162) and wait for 2.5 ms.
After a bus reset, the master must issue a reboot command (set
SFT_RST_REBOOT; see p. 162) and wait for 2.5 ms."
SFT_RESET_REBOOT is in the SOFT_RESET_REBOOT register.
>>
>> Signed-off-by: Richard Fitzgerald <rf at opensource.cirrus.com>
>> Signed-off-by: Stefan Binding <sbinding at opensource.cirrus.com>
>> ---
>> include/sound/cs42l42.h | 5 +++++
>> sound/soc/codecs/cs42l42.c | 2 ++
>> 2 files changed, 7 insertions(+)
>>
>> diff --git a/include/sound/cs42l42.h b/include/sound/cs42l42.h
>> index 1d1c24fdd0cae..3994e933db195 100644
>> --- a/include/sound/cs42l42.h
>> +++ b/include/sound/cs42l42.h
>> @@ -34,6 +34,7 @@
>> #define CS42L42_PAGE_24 0x2400
>> #define CS42L42_PAGE_25 0x2500
>> #define CS42L42_PAGE_26 0x2600
>> +#define CS42L42_PAGE_27 0x2700
>> #define CS42L42_PAGE_28 0x2800
>> #define CS42L42_PAGE_29 0x2900
>> #define CS42L42_PAGE_2A 0x2A00
>> @@ -720,6 +721,10 @@
>>
>> #define CS42L42_SRC_SDOUT_FS (CS42L42_PAGE_26 + 0x09)
>>
>> +/* Page 0x27 DMA */
>> +#define CS42L42_SOFT_RESET_REBOOT (CS42L42_PAGE_27 + 0x01)
>> +#define CS42L42_SFT_RST_REBOOT_MASK BIT(1)
>> +
>> /* Page 0x28 S/PDIF Registers */
>> #define CS42L42_SPDIF_CTL1 (CS42L42_PAGE_28 + 0x01)
>> #define CS42L42_SPDIF_CTL2 (CS42L42_PAGE_28 + 0x02)
>> diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
>> index 2fefbcf7bd130..82aa11d6937be 100644
>> --- a/sound/soc/codecs/cs42l42.c
>> +++ b/sound/soc/codecs/cs42l42.c
>> @@ -293,6 +293,7 @@ bool cs42l42_readable_register(struct device *dev, unsigned int reg)
>> case CS42L42_SPDIF_SW_CTL1:
>> case CS42L42_SRC_SDIN_FS:
>> case CS42L42_SRC_SDOUT_FS:
>> + case CS42L42_SOFT_RESET_REBOOT:
>> case CS42L42_SPDIF_CTL1:
>> case CS42L42_SPDIF_CTL2:
>> case CS42L42_SPDIF_CTL3:
>> @@ -358,6 +359,7 @@ bool cs42l42_volatile_register(struct device *dev, unsigned int reg)
>> case CS42L42_LOAD_DET_DONE:
>> case CS42L42_DET_STATUS1:
>> case CS42L42_DET_STATUS2:
>> + case CS42L42_SOFT_RESET_REBOOT:
>> return true;
>> default:
>> return false;
More information about the Alsa-devel
mailing list