[PATCH v2 4/8] ASoC: cs42l42: Separate ASP config from PLL config
Stefan Binding
sbinding at opensource.cirrus.com
Wed Jan 18 17:04:48 CET 2023
From: Richard Fitzgerald <rf at opensource.cirrus.com>
Setup of the ASP (audio serial port) was being done as a side-effect of
cs42l42_pll_config() and forces a restriction on the ratio of sample_rate
to bit_clock that is invalid for Soundwire.
Move the ASP setup into a dedicated function.
Signed-off-by: Richard Fitzgerald <rf at opensource.cirrus.com>
Signed-off-by: Stefan Binding <sbinding at opensource.cirrus.com>
---
sound/soc/codecs/cs42l42.c | 81 +++++++++++++++++++++-----------------
sound/soc/codecs/cs42l42.h | 1 -
2 files changed, 44 insertions(+), 38 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 939f8bcc222c0..d81c6eb1c1e59 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -658,7 +658,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int
{
struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
int i;
- u32 fsync;
/* Don't reconfigure if there is an audio stream running */
if (cs42l42->stream_use) {
@@ -684,40 +683,6 @@ static int cs42l42_pll_config(struct snd_soc_component *component, unsigned int
(pll_ratio_table[i].mclk_int !=
24000000)) <<
CS42L42_INTERNAL_FS_SHIFT);
-
- /* Set up the LRCLK */
- fsync = clk / cs42l42->srate;
- if (((fsync * cs42l42->srate) != clk)
- || ((fsync % 2) != 0)) {
- dev_err(component->dev,
- "Unsupported sclk %d/sample rate %d\n",
- clk,
- cs42l42->srate);
- return -EINVAL;
- }
- /* Set the LRCLK period */
- snd_soc_component_update_bits(component,
- CS42L42_FSYNC_P_LOWER,
- CS42L42_FSYNC_PERIOD_MASK,
- CS42L42_FRAC0_VAL(fsync - 1) <<
- CS42L42_FSYNC_PERIOD_SHIFT);
- snd_soc_component_update_bits(component,
- CS42L42_FSYNC_P_UPPER,
- CS42L42_FSYNC_PERIOD_MASK,
- CS42L42_FRAC1_VAL(fsync - 1) <<
- CS42L42_FSYNC_PERIOD_SHIFT);
- /* Set the LRCLK to 50% duty cycle */
- fsync = fsync / 2;
- snd_soc_component_update_bits(component,
- CS42L42_FSYNC_PW_LOWER,
- CS42L42_FSYNC_PULSE_WIDTH_MASK,
- CS42L42_FRAC0_VAL(fsync - 1) <<
- CS42L42_FSYNC_PULSE_WIDTH_SHIFT);
- snd_soc_component_update_bits(component,
- CS42L42_FSYNC_PW_UPPER,
- CS42L42_FSYNC_PULSE_WIDTH_MASK,
- CS42L42_FRAC1_VAL(fsync - 1) <<
- CS42L42_FSYNC_PULSE_WIDTH_SHIFT);
if (pll_ratio_table[i].mclk_src_sel == 0) {
/* Pass the clock straight through */
snd_soc_component_update_bits(component,
@@ -809,6 +774,46 @@ static void cs42l42_src_config(struct snd_soc_component *component, unsigned int
fs << CS42L42_CLK_OASRC_SEL_SHIFT);
}
+static int cs42l42_asp_config(struct snd_soc_component *component,
+ unsigned int sclk, unsigned int sample_rate)
+{
+ u32 fsync = sclk / sample_rate;
+
+ /* Set up the LRCLK */
+ if (((fsync * sample_rate) != sclk) || ((fsync % 2) != 0)) {
+ dev_err(component->dev,
+ "Unsupported sclk %d/sample rate %d\n",
+ sclk,
+ sample_rate);
+ return -EINVAL;
+ }
+ /* Set the LRCLK period */
+ snd_soc_component_update_bits(component,
+ CS42L42_FSYNC_P_LOWER,
+ CS42L42_FSYNC_PERIOD_MASK,
+ CS42L42_FRAC0_VAL(fsync - 1) <<
+ CS42L42_FSYNC_PERIOD_SHIFT);
+ snd_soc_component_update_bits(component,
+ CS42L42_FSYNC_P_UPPER,
+ CS42L42_FSYNC_PERIOD_MASK,
+ CS42L42_FRAC1_VAL(fsync - 1) <<
+ CS42L42_FSYNC_PERIOD_SHIFT);
+ /* Set the LRCLK to 50% duty cycle */
+ fsync = fsync / 2;
+ snd_soc_component_update_bits(component,
+ CS42L42_FSYNC_PW_LOWER,
+ CS42L42_FSYNC_PULSE_WIDTH_MASK,
+ CS42L42_FRAC0_VAL(fsync - 1) <<
+ CS42L42_FSYNC_PULSE_WIDTH_SHIFT);
+ snd_soc_component_update_bits(component,
+ CS42L42_FSYNC_PW_UPPER,
+ CS42L42_FSYNC_PULSE_WIDTH_MASK,
+ CS42L42_FRAC1_VAL(fsync - 1) <<
+ CS42L42_FSYNC_PULSE_WIDTH_SHIFT);
+
+ return 0;
+}
+
static int cs42l42_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
{
struct snd_soc_component *component = codec_dai->component;
@@ -904,8 +909,6 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
unsigned int bclk;
int ret;
- cs42l42->srate = params_rate(params);
-
if (cs42l42->bclk_ratio) {
/* machine driver has set the BCLK/samp-rate ratio */
bclk = cs42l42->bclk_ratio * params_rate(params);
@@ -966,6 +969,10 @@ static int cs42l42_pcm_hw_params(struct snd_pcm_substream *substream,
if (ret)
return ret;
+ ret = cs42l42_asp_config(component, bclk, sample_rate);
+ if (ret)
+ return ret;
+
cs42l42_src_config(component, sample_rate);
return 0;
diff --git a/sound/soc/codecs/cs42l42.h b/sound/soc/codecs/cs42l42.h
index a721366641127..17aab06adc8e6 100644
--- a/sound/soc/codecs/cs42l42.h
+++ b/sound/soc/codecs/cs42l42.h
@@ -36,7 +36,6 @@ struct cs42l42_private {
int pll_config;
u32 sclk;
u32 bclk_ratio;
- u32 srate;
u8 plug_state;
u8 hs_type;
u8 ts_inv;
--
2.34.1
More information about the Alsa-devel
mailing list