[PATCH] ALSA: hda: Skip creating captures in SOF context

Kai-Heng Feng kai.heng.feng at canonical.com
Thu Jan 5 13:36:25 CET 2023


On Mon, Aug 15, 2022 at 3:55 PM Kai-Heng Feng
<kai.heng.feng at canonical.com> wrote:
>
> On Wed, Jul 20, 2022 at 9:31 PM Pierre-Louis Bossart
> <pierre-louis.bossart at linux.intel.com> wrote:
> >
> >
> >
> > On 7/20/22 02:52, Jaroslav Kysela wrote:
> > > Dne 20. 07. 22 v 3:45 Kai-Heng Feng napsal(a):
> > >> On Tue, Jul 19, 2022 at 11:41 PM Jaroslav Kysela <perex at perex.cz> wrote:
> > >>>
> > >>> Dne 19. 07. 22 v 16:47 Kai-Heng Feng napsal(a):
> > >>>> On HP laptops that use SOF driver for DMIC, the micmute LED doesn't
> > >>>> light up when mic is muted after commit 9b014266ef8a ("ASoC: SOF:
> > >>>> topology: use new sound control LED layer").
> > >>>>
> > >>>> The micmute LED itself is still working via sysfs, but it doesn't follow
> > >>>> mute anymore. That's because unlike vendors like Dell and Lenovo, HP
> > >>>> laptops use HDA codec to control mute LEDs instead of ACPI. So on HP
> > >>>> laptops, both SOF and HDA create captures with
> > >>>> SNDRV_CTL_ELEM_ACCESS_MIC_LED access, snd_ctl_led_set_state() considers
> > >>>> there are two different kcontrols and one of them is not muted.
> > >>>
> > >>> It does not mean that it's a wrong behavior. When both controls are muted, the
> > >>> LED should be turned on. It just requires that all inputs are off (and it may
> > >>> be the default - probably we can set in UCM or so). If you turn the "Capture
> > >>> Switch" off in amixer / alsamixer, do things work as expected ?
> > >>
> > >> Yes. When all captures are muted the micmute LED is on.
> > >>
> > >>>
> > >>>> So skip creating captures for HDA when it's called from SOF, the
> > >>>> captures are already handled by SOF.
> > >>>
> > >>> The capture controls are for other inputs like external analog microphone. If
> > >>> it is required to suppress the MIC LED for some hardware, just skip the
> > >>> "spec->mic_mute_led = 1" assignment in hda_generic.c . Also, the check
> > >>> "codec->core.type != HDA_DEV_ASOC" is not sufficient, because you don't know,
> > >>> if the topology really sets the MIC LED flag.
> > >>
> > >> AFAIK the external analog microphone on DMIC laptop is driven by SOF driver too.
> > >> If those capture controls are indeed needed for external analog mics,
> > >> use UCM to mute them by default won't work either.
> > >
> > > Could you describe this ? I though that only DMIC is handled by SOF when HDA
> > > codec is in the system. There is a separate analog codec for external analog
> > > microphone or the HDA codec is somehow connected to SOF/DSP ? If so, how ?
> >
> > The HDA codec is connected in the same way in all cases, there's no
> > hardware/electrical/routing difference.
> >
> > When used, the SOF driver will handle ALL links, be they DMIC or
> > HDAudio. The difference for HDaudio is that instead of a single DMA
> > transfer (DDR->FIFO), we have a first 'Host' DMA into the DSP SRAM, some
> > processing and a second 'Link' DMA from DSP SRAM to the HDaudio FIFO
> > (reversed flow for capture).
>
> So is this approach sufficient for this issue? Or should I explore
> other possibilities?

A gentle ping...

>
> Kai-Heng
>
> >


More information about the Alsa-devel mailing list