[PATCH 2/8] ASoC: codecs: wsa881x: Simplify &pdev->dev in probe

[Krzysztof Kozlowski]

The probe already stores pointer to &pdev->dev, so use it to make the
code a bit easier to read.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 sound/soc/codecs/wsa881x.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c
index 6c8b1db649b8..cd7be55f6a89 100644
--- a/sound/soc/codecs/wsa881x.c
+++ b/sound/soc/codecs/wsa881x.c
@@ -1113,20 +1113,20 @@ static int wsa881x_probe(struct sdw_slave *pdev,
 	struct wsa881x_priv *wsa881x;
 	struct device *dev = &pdev->dev;
 
-	wsa881x = devm_kzalloc(&pdev->dev, sizeof(*wsa881x), GFP_KERNEL);
+	wsa881x = devm_kzalloc(dev, sizeof(*wsa881x), GFP_KERNEL);
 	if (!wsa881x)
 		return -ENOMEM;
 
-	wsa881x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown",
+	wsa881x->sd_n = devm_gpiod_get_optional(dev, "powerdown",
 						GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	if (IS_ERR(wsa881x->sd_n)) {
 		dev_err(&pdev->dev, "Shutdown Control GPIO not found\n");
 		return PTR_ERR(wsa881x->sd_n);
 	}
 
-	dev_set_drvdata(&pdev->dev, wsa881x);
+	dev_set_drvdata(dev, wsa881x);
 	wsa881x->slave = pdev;
-	wsa881x->dev = &pdev->dev;
+	wsa881x->dev = dev;
 	wsa881x->sconfig.ch_count = 1;
 	wsa881x->sconfig.bps = 1;
 	wsa881x->sconfig.frame_rate = 48000;
@@ -1149,7 +1149,7 @@ static int wsa881x_probe(struct sdw_slave *pdev,
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 
-	return devm_snd_soc_register_component(&pdev->dev,
+	return devm_snd_soc_register_component(dev,
 					       &wsa881x_component_drv,
 					       wsa881x_dais,
 					       ARRAY_SIZE(wsa881x_dais));
-- 
2.34.1