[PATCH] ALSA: usb-audio: Clear fixed clock rate at closing EP

[Takashi Iwai]

The recent commit c11117b634f4 ("ALSA: usb-audio: Refcount multiple
accesses on the single clock") tries to manage the clock rate shared
by several endpoints.  This was intended for avoiding the unmatched
rate by a different endpoint, but unfortunately, it introduced a
regression for PulseAudio and pipewire, too; those applications try to
probe the multiple possible rates (44.1k and 48kHz) and setting up the
normal rate fails but only the last rate is applied.

The cause is that the last sample rate is still left to the clock
reference even after closing the endpoint, and this value is still
used at the next open.  It happens only when applications set up via
PCM prepare but don't start/stop the stream; the rate is reset when
the stream is stopped, but it's not cleared at close.

This patch addresses the issue above, simply by clearing the rate set
in the clock reference at the last close of each endpoint.

Fixes: c11117b634f4 ("ALSA: usb-audio: Refcount multiple accesses on the single clock")
Reported-by: Jason A. Donenfeld <Jason at zx2c4.com>
Cc: <stable at vger.kernel.org>
Link: https://lore.kernel.org/all/YxXIWv8dYmg1tnXP@zx2c4.com/
Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2620
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
 sound/usb/endpoint.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index a42f2ce19455..8c8f9a851f89 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -925,6 +925,8 @@ void snd_usb_endpoint_close(struct snd_usb_audio *chip,
 		endpoint_set_interface(chip, ep, false);
 
 	if (!--ep->opened) {
+		if (ep->clock_ref && !atomic_read(&ep->clock_ref->locked))
+			ep->clock_ref->rate = 0;
 		ep->iface = 0;
 		ep->altsetting = 0;
 		ep->cur_audiofmt = NULL;
-- 
2.35.3