[PATCH v2 2/4] ALSA: hda: Rework snd_hdac_stream_reset() to use macros
Jon Hunter
jonathanh at nvidia.com
Thu Oct 6 10:45:17 CEST 2022
On 05/10/2022 13:29, Takashi Iwai wrote:
...
>> HDA playback is failing on -next for various Tegra boards. Bisect is
>> point to this commit and reverting it fixes the problem. I was a bit
>> puzzled why this change is causing a problem, but looking closer there
>> is a difference between the previous code that was calling
>> snd_hdac_stream_readb() and the new code that is calling
>> snd_hdac_stream_readb_poll(). The function snd_hdac_stream_readb()
>> calls snd_hdac_aligned_mmio() is see if the device has an aligned MMIO
>> which Tegra does and then would call snd_hdac_aligned_read(). However,
>> now the code always call readb() and this is breaking Tegra.
>>
>> So it is either necessary to update snd_hdac_stream_readb_poll() to
>> handle this or revert this change.
>
> Does the patch below work?
>
>
> thanks,
>
> Takashi
>
> -- 8< --
> --- a/include/sound/hdaudio.h
> +++ b/include/sound/hdaudio.h
> @@ -592,8 +592,8 @@ int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus,
> #define snd_hdac_stream_readb(dev, reg) \
> snd_hdac_reg_readb((dev)->bus, (dev)->sd_addr + AZX_REG_ ## reg)
> #define snd_hdac_stream_readb_poll(dev, reg, val, cond, delay_us, timeout_us) \
> - readb_poll_timeout((dev)->sd_addr + AZX_REG_ ## reg, val, cond, \
> - delay_us, timeout_us)
> + read_poll_timeout(snd_hdac_reg_readb, val, cond, delay_us, timeout_us,\
> + false, (dev)->bus, (dev)->sd_addr + AZX_REG_ ## reg)
> #define snd_hdac_stream_readl_poll(dev, reg, val, cond, delay_us, timeout_us) \
> readl_poll_timeout((dev)->sd_addr + AZX_REG_ ## reg, val, cond, \
> delay_us, timeout_us)
So looking at this a bit more I see ...
[ 199.422773] bad: scheduling from the idle thread!
[ 199.427610] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D C 6.0.0-rc7-next-20220930-00007-gd6ae4ed0a78f-dirty #23
[ 199.438880] Hardware name: NVIDIA Jetson Nano Developer Kit (DT)
[ 199.444899] Call trace:
[ 199.447357] dump_backtrace.part.7+0xe8/0xf8
[ 199.451680] show_stack+0x14/0x38
[ 199.455024] dump_stack_lvl+0x64/0x7c
[ 199.458715] dump_stack+0x14/0x2c
[ 199.462067] dequeue_task_idle+0x2c/0x58
[ 199.466038] dequeue_task+0x38/0x98
[ 199.469565] __schedule+0x4a4/0x6d8
[ 199.473104] schedule+0x58/0xc0
[ 199.476292] schedule_hrtimeout_range_clock+0x98/0x108
[ 199.481472] schedule_hrtimeout_range+0x10/0x18
[ 199.486039] usleep_range_state+0x7c/0xb0
[ 199.490084] snd_hdac_stream_reset+0xe8/0x328 [snd_hda_core]
[ 199.495913] snd_hdac_stream_sync+0xe4/0x190 [snd_hda_core]
[ 199.501627] azx_pcm_trigger+0x1d8/0x250 [snd_hda_codec]
[ 199.507109] snd_pcm_do_stop+0x54/0x70
[ 199.510904] snd_pcm_action_single+0x44/0xa0
[ 199.515215] snd_pcm_drain_done+0x20/0x28
[ 199.519267] snd_pcm_update_state+0x114/0x128
[ 199.523670] snd_pcm_update_hw_ptr0+0x22c/0x3a0
[ 199.528246] snd_pcm_period_elapsed_under_stream_lock+0x44/0x88
[ 199.534216] snd_pcm_period_elapsed+0x24/0x48
[ 199.538617] stream_update+0x3c/0x50 [snd_hda_codec]
[ 199.543737] snd_hdac_bus_handle_stream_irq+0xe8/0x150 [snd_hda_core]
[ 199.550320] azx_interrupt+0xb4/0x1b0 [snd_hda_codec]
[ 199.555524] __handle_irq_event_percpu+0x74/0x140
[ 199.560281] handle_irq_event_percpu+0x14/0x48
[ 199.564772] handle_irq_event+0x44/0x88
[ 199.568653] handle_fasteoi_irq+0xa8/0x130
[ 199.572788] generic_handle_domain_irq+0x28/0x40
[ 199.577452] gic_handle_irq+0x9c/0xb8
[ 199.581168] call_on_irq_stack+0x2c/0x40
[ 199.585129] do_interrupt_handler+0x7c/0x80
[ 199.589355] el1_interrupt+0x34/0x68
[ 199.592969] el1h_64_irq_handler+0x14/0x20
[ 199.597107] el1h_64_irq+0x64/0x68
[ 199.600540] cpuidle_enter_state+0x130/0x2f8
[ 199.604853] cpuidle_enter+0x38/0x50
[ 199.608463] call_cpuidle+0x18/0x38
[ 199.611991] do_idle+0x1f8/0x248
[ 199.615259] cpu_startup_entry+0x20/0x28
[ 199.619224] kernel_init+0x0/0x128
[ 199.622669] arch_post_acpi_subsys_init+0x0/0x8
[ 199.627240] start_kernel+0x630/0x668
[ 199.630933] __primary_switched+0xb4/0xbc
If I change your patch to be read_poll_timeout_atomic, then it works \o/
Can we make that update?
Jon
--
nvpublic
More information about the Alsa-devel
mailing list