[PATCH 10/12] dt-bindings: mediatek: mt8188: add audio afe document
Trevor Wu (吳文良)
Trevor.Wu at mediatek.com
Wed Oct 5 12:12:07 CEST 2022
On Mon, 2022-10-03 at 11:30 -0500, Rob Herring wrote:
> On Fri, Sep 30, 2022 at 10:56:59PM +0800, Trevor Wu wrote:
> > Add mt8188 audio afe document.
> >
> > Signed-off-by: Trevor Wu <trevor.wu at mediatek.com>
> > ---
> > .../bindings/sound/mt8188-afe-pcm.yaml | 202
> > ++++++++++++++++++
> > 1 file changed, 202 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/sound/mt8188-
> > afe-pcm.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/mt8188-afe-
> > pcm.yaml b/Documentation/devicetree/bindings/sound/mt8188-afe-
> > pcm.yaml
> > new file mode 100644
> > index 000000000000..50d53c5d59ad
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/mt8188-afe-pcm.yaml
> > @@ -0,0 +1,202 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id:
> > https://urldefense.com/v3/__http://devicetree.org/schemas/sound/mt8188-afe-pcm.yaml*__;Iw!!CTRNKA9wMg0ARbw!xwWXHB7ARJJusyOyhgO1AwihlxFMNOrcEU6Qs5vpVCj2VHgxRXNRfpHvNTkqt1MlsQ$
> >
> > +$schema:
> > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!xwWXHB7ARJJusyOyhgO1AwihlxFMNOrcEU6Qs5vpVCj2VHgxRXNRfpHvNTk0c9L9VQ$
> >
> > +
> > +title: Mediatek AFE PCM controller for mt8188
> > +
> > +maintainers:
> > + - Trevor Wu <trevor.wu at mediatek.com>
> > +
> > +properties:
> > + compatible:
> > + const: mediatek,mt8188-audio
>
> If the block is called 'AFE PCM controller', then perhaps use some
> of
> that for the name instead of just 'audio'.
OK. Is "mediatek,mt8188-afe" better for you?
>
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + resets:
> > + maxItems: 1
> > +
> > + reset-names:
> > + const: audiosys
> > +
> > + memory-region:
> > + maxItems: 1
> > + description: |
> > + Shared memory region for AFE memif. A "shared-dma-pool".
> > + See ../reserved-memory/reserved-memory.txt for details.
>
> What does that file contain?
>
> No need to provide generic descriptions of common properties, so the
> reference can just be dropped.
>
"../reserved-memory/reserved-memory" contains the detail of reserved-
memory, and it's replaced by reserved-memory.yaml now.
I will remove the item in V2, because it's still not supported in the
current code base.
Next time I will remove the description, when I add common properties.
> > +
> > + mediatek,topckgen:
> > + $ref: "/schemas/types.yaml#/definitions/phandle"
>
> Don't need quotes.
>
Did you mean I should delete this line, and only leave description
here?
> > + description: The phandle of the mediatek topckgen controller
> > +
> > + mediatek,infracfg:
> > + $ref: "/schemas/types.yaml#/definitions/phandle"
> > + description: The phandle of the mediatek infracfg controller
> > +
> > + power-domains:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: 26M clock
> > + - description: audio pll1 clock
> > + - description: audio pll2 clock
> > + - description: clock divider for i2si1_mck
> > + - description: clock divider for i2si2_mck
> > + - description: clock divider for i2so1_mck
> > + - description: clock divider for i2so2_mck
> > + - description: clock divider for dptx_mck
> > + - description: a1sys hoping clock
> > + - description: audio intbus clock
> > + - description: audio hires clock
> > + - description: audio local bus clock
> > + - description: mux for dptx_mck
> > + - description: mux for i2so1_mck
> > + - description: mux for i2so2_mck
> > + - description: mux for i2si1_mck
> > + - description: mux for i2si2_mck
> > + - description: audio 26m clock
> > +
> > + clock-names:
> > + items:
> > + - const: clk26m
> > + - const: apll1_ck
> > + - const: apll2_ck
> > + - const: apll12_div0
> > + - const: apll12_div1
> > + - const: apll12_div2
> > + - const: apll12_div3
> > + - const: apll12_div9
> > + - const: a1sys_hp_sel
> > + - const: aud_intbus_sel
> > + - const: audio_h_sel
> > + - const: audio_local_bus_sel
> > + - const: dptx_m_sel
> > + - const: i2so1_m_sel
> > + - const: i2so2_m_sel
> > + - const: i2si1_m_sel
> > + - const: i2si2_m_sel
> > + - const: adsp_audio26m
> > +
> > + mediatek,etdm-in1-chn-disabled:
> > + $ref: /schemas/types.yaml#/definitions/uint8-array
> > + maxItems: 16
> > + description: Specify which input channel should be disabled.
>
> What value disables/enables?
>
> items:
> enum: [ ??? ]
>
Max channel number is 16, so the value could be 0~15 in the array.
For example, when 0 and 2 are configured, the input channel 0 and
channel 2 won't be put in data on memory.
I will add enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15]
here.
> > +
> > + mediatek,etdm-in2-chn-disabled:
> > + $ref: /schemas/types.yaml#/definitions/uint8-array
> > + maxItems: 16
> > + description: Specify which input channel should be disabled.
> > +
> > +patternProperties:
> > + "^mediatek,etdm-in[1-2]-mclk-always-on-rate-hz$":
> > + description: Specify etdm in mclk output rate for always on
> > case.
> > +
> > + "^mediatek,etdm-out[1-3]-mclk-always-on-rate-hz$":
> > + description: Specify etdm out mclk output rate for always on
> > case.
> > +
> > + "^mediatek,etdm-in[1-2]-multi-pin-mode$":
> > + type: boolean
> > + description: if present, the etdm data mode is I2S.
> > +
> > + "^mediatek,etdm-out[1-3]-multi-pin-mode$":
> > + type: boolean
> > + description: if present, the etdm data mode is I2S.
> > +
> > + "^mediatek,etdm-in[1-2]-cowork-source$":
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description: |
> > + etdm modules can share the same external clock pin. Specify
> > + which etdm clock source is required by this etdm in moudule.
> > + enum:
> > + - 0 # etdm1_in
> > + - 1 # etdm2_in
> > + - 2 # etdm1_out
> > + - 3 # etdm2_out
> > +
> > + "^mediatek,etdm-out[1-2]-cowork-source$":
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + description: |
> > + etdm modules can share the same external clock pin. Specify
> > + which etdm clock source is required by this etdm out
> > moudule.
> > + enum:
> > + - 0 # etdm1_in
> > + - 1 # etdm2_in
> > + - 2 # etdm1_out
> > + - 3 # etdm2_out
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - resets
> > + - reset-names
> > + - mediatek,topckgen
> > + - mediatek,infracfg
> > + - power-domains
> > + - clocks
> > + - clock-names
> > + - memory-region
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > +
> > + afe: afe at 10b10000 {
> > + compatible = "mediatek,mt8188-audio";
> > + reg = <0x10b10000 0x10000>;
> > + interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
> > + resets = <&watchdog 14>;
> > + reset-names = "audiosys";
> > + mediatek,topckgen = <&topckgen>;
> > + mediatek,infracfg = <&infracfg_ao>;
> > + power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
> > + memory-region = <&snd_dma_mem_reserved>;
> > + clocks = <&clk26m>,
> > + <&topckgen 72>, //CLK_TOP_APLL1
> > + <&topckgen 73>, //CLK_TOP_APLL2
> > + <&topckgen 186>, //CLK_TOP_APLL12_CK_DIV0
> > + <&topckgen 187>, //CLK_TOP_APLL12_CK_DIV1
> > + <&topckgen 188>, //CLK_TOP_APLL12_CK_DIV2
> > + <&topckgen 189>, //CLK_TOP_APLL12_CK_DIV3
> > + <&topckgen 191>, //CLK_TOP_APLL12_CK_DIV9
> > + <&topckgen 83>, //CLK_TOP_A1SYS_HP
> > + <&topckgen 31>, //CLK_TOP_AUD_INTBUS
> > + <&topckgen 32>, //CLK_TOP_AUDIO_H
> > + <&topckgen 69>, //CLK_TOP_AUDIO_LOCAL_BUS
> > + <&topckgen 81>, //CLK_TOP_DPTX
> > + <&topckgen 77>, //CLK_TOP_I2SO1
> > + <&topckgen 78>, //CLK_TOP_I2SO2
> > + <&topckgen 79>, //CLK_TOP_I2SI1
> > + <&topckgen 80>, //CLK_TOP_I2SI2
> > + <&adsp_audio26m 0>; //CLK_AUDIODSP_AUDIO26M
> > + clock-names = "clk26m",
> > + "apll1_ck",
> > + "apll2_ck",
> > + "apll12_div0",
> > + "apll12_div1",
> > + "apll12_div2",
> > + "apll12_div3",
> > + "apll12_div9",
> > + "a1sys_hp_sel",
> > + "aud_intbus_sel",
> > + "audio_h_sel",
> > + "audio_local_bus_sel",
> > + "dptx_m_sel",
> > + "i2so1_m_sel",
> > + "i2so2_m_sel",
> > + "i2si1_m_sel",
> > + "i2si2_m_sel",
> > + "adsp_audio_26m";
> > + };
> > +
> > +...
> > --
> > 2.18.0
> >
> >
More information about the Alsa-devel
mailing list