[PATCH v3 5/9] ASoC: rt5682-sdw: Switch to new snd_sdw_params_to_config helper

[Charles Keepax]

The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.

Signed-off-by: Charles Keepax <ckeepax at opensource.cirrus.com>
---

Changes since v2:
 - Correct other spelling error, sorry.
Changes since v1:
 - Correct spelling error in commit message

 sound/soc/codecs/rt5682-sdw.c | 28 +++++++++-------------------
 1 file changed, 9 insertions(+), 19 deletions(-)

diff --git a/sound/soc/codecs/rt5682-sdw.c b/sound/soc/codecs/rt5682-sdw.c
index c1a94229dc7e3..d8a573dcb771b 100644
--- a/sound/soc/codecs/rt5682-sdw.c
+++ b/sound/soc/codecs/rt5682-sdw.c
@@ -24,6 +24,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/jack.h>
+#include <sound/sdw.h>
 #include <sound/soc.h>
 #include <sound/soc-dapm.h>
 #include <sound/initval.h>
@@ -130,11 +131,10 @@ static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_component *component = dai->component;
 	struct rt5682_priv *rt5682 = snd_soc_component_get_drvdata(component);
-	struct sdw_stream_config stream_config;
-	struct sdw_port_config port_config;
-	enum sdw_data_direction direction;
+	struct sdw_stream_config stream_config = {0};
+	struct sdw_port_config port_config = {0};
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval;
 	unsigned int val_p = 0, val_c = 0, osr_p = 0, osr_c = 0;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
@@ -147,22 +147,12 @@ static int rt5682_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 
 	/* SoundWire specific configuration */
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		direction = SDW_DATA_DIR_RX;
-		port = 1;
-	} else {
-		direction = SDW_DATA_DIR_TX;
-		port = 2;
-	}
+	snd_sdw_params_to_config(substream, params, &stream_config, &port_config);
 
-	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
-	stream_config.bps = snd_pcm_format_width(params_format(params));
-	stream_config.direction = direction;
-
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
-	port_config.num = port;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		port_config.num = 1;
+	else
+		port_config.num = 2;
 
 	retval = sdw_stream_add_slave(rt5682->slave, &stream_config,
 				      &port_config, 1, stream->sdw_stream);
-- 
2.30.2