[PATCH v3 1/3] dt-bindings: slimbus: convert bus description to DT schema
Srinivas Kandagatla
srinivas.kandagatla at linaro.org
Wed Nov 9 10:57:04 CET 2022
On 26/10/2022 17:43, Krzysztof Kozlowski wrote:
> Convert the SLIMbus bus description bindings to DT Schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Reviewed-by: Rob Herring <robh at kernel.org>
Applied all thanks,
--srini
> ---
> .../devicetree/bindings/slimbus/bus.txt | 60 ------------
> .../bindings/slimbus/slim-ngd-qcom-ctrl.txt | 2 -
> .../bindings/slimbus/slim-qcom-ctrl.txt | 3 -
> .../devicetree/bindings/slimbus/slimbus.yaml | 95 +++++++++++++++++++
> 4 files changed, 95 insertions(+), 65 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/slimbus/bus.txt
> create mode 100644 Documentation/devicetree/bindings/slimbus/slimbus.yaml
>
> diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt
> deleted file mode 100644
> index bbe871f82a8b..000000000000
> --- a/Documentation/devicetree/bindings/slimbus/bus.txt
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -SLIM(Serial Low Power Interchip Media Bus) bus
> -
> -SLIMbus is a 2-wire bus, and is used to communicate with peripheral
> -components like audio-codec.
> -
> -Required property for SLIMbus controller node:
> -- compatible - name of SLIMbus controller
> -
> -Child nodes:
> -Every SLIMbus controller node can contain zero or more child nodes
> -representing slave devices on the bus. Every SLIMbus slave device is
> -uniquely determined by the enumeration address containing 4 fields:
> -Manufacturer ID, Product code, Device index, and Instance value for
> -the device.
> -If child node is not present and it is instantiated after device
> -discovery (slave device reporting itself present).
> -
> -In some cases it may be necessary to describe non-probeable device
> -details such as non-standard ways of powering up a device. In
> -such cases, child nodes for those devices will be present as
> -slaves of the SLIMbus controller, as detailed below.
> -
> -Required property for SLIMbus child node if it is present:
> -- reg - Should be ('Device index', 'Instance ID') from SLIMbus
> - Enumeration Address.
> - Device Index Uniquely identifies multiple Devices within
> - a single Component.
> - Instance ID Is for the cases where multiple Devices of the
> - same type or Class are attached to the bus.
> -
> -- compatible -"slimMID,PID". The textual representation of Manufacturer ID,
> - Product Code, shall be in lower case hexadecimal with leading
> - zeroes suppressed
> -
> -Optional property for SLIMbus child node if it is present:
> -- slim-ifc-dev - Should be phandle to SLIMBus Interface device.
> - Required for devices which deal with streams.
> -
> -SLIMbus example for Qualcomm's slimbus manager component:
> -
> - slim at 28080000 {
> - compatible = "qcom,apq8064-slim", "qcom,slim";
> - reg = <0x28080000 0x2000>,
> - interrupts = <0 33 0>;
> - clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
> - clock-names = "iface", "core";
> - #address-cells = <2>;
> - #size-cell = <0>;
> -
> - codec_ifd: ifd at 0,0{
> - compatible = "slim217,60";
> - reg = <0 0>;
> - };
> -
> - codec: wcd9310 at 1,0{
> - compatible = "slim217,60";
> - reg = <1 0>;
> - slim-ifc-dev = <&codec_ifd>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
> index e94a2ad3a710..7c3d9eb6af5d 100644
> --- a/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
> +++ b/Documentation/devicetree/bindings/slimbus/slim-ngd-qcom-ctrl.txt
> @@ -5,8 +5,6 @@ with SLIMBus slaves directly over the bus using messaging interface and
> communicating with master component residing on ADSP for bandwidth and
> data-channel management
>
> -Please refer to slimbus/bus.txt for details of the common SLIMBus bindings.
> -
> - compatible:
> Usage: required
> Value type: <stringlist>
> diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> index 922dcb8ff24a..6d955e129f90 100644
> --- a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
> @@ -4,9 +4,6 @@ master component.
>
> Required properties:
>
> - - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> - - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
> -
> - reg : Offset and length of the register region(s) for the device
> - reg-names : Register region name(s) referenced in reg above
> Required register resource entries are:
> diff --git a/Documentation/devicetree/bindings/slimbus/slimbus.yaml b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
> new file mode 100644
> index 000000000000..22513fb7c59a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/slimbus/slimbus.yaml
> @@ -0,0 +1,95 @@
> +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/slimbus/slimbus.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: SLIM (Serial Low Power Interchip Media) bus
> +
> +maintainers:
> + - Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> +
> +description:
> + SLIMbus is a 2-wire bus, and is used to communicate with peripheral
> + components like audio-codec.
> +
> +properties:
> + $nodename:
> + pattern: "^slim(@.*|-[0-9a-f])*$"
> +
> + "#address-cells":
> + const: 2
> +
> + "#size-cells":
> + const: 0
> +
> +patternProperties:
> + "^.*@[0-9a-f]+,[0-9a-f]+$":
> + type: object
> + description: |
> + Every SLIMbus controller node can contain zero or more child nodes
> + representing slave devices on the bus. Every SLIMbus slave device is
> + uniquely determined by the enumeration address containing 4 fields::
> + Manufacturer ID, Product code, Device index, and Instance value for the
> + device.
> +
> + If child node is not present and it is instantiated after device
> + discovery (slave device reporting itself present).
> +
> + In some cases it may be necessary to describe non-probeable device
> + details such as non-standard ways of powering up a device. In such cases,
> + child nodes for those devices will be present as slaves of the SLIMbus
> + controller.
> +
> + properties:
> + compatible:
> + pattern: "^slim[0-9a-f]+,[0-9a-f]+$"
> +
> + reg:
> + maxItems: 1
> + description: |
> + Pair of (device index, instande ID), where::
> + - Device index, which uniquely identifies multiple devices within a
> + single component.
> + - Instance ID, can be used for the cases where multiple devices of
> + the same type or class are attached to the bus.
> +
> + required:
> + - compatible
> + - reg
> +
> + additionalProperties: true
> +
> +required:
> + - "#address-cells"
> + - "#size-cells"
> +
> +additionalProperties: true
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,gcc-msm8960.h>
> + #include <dt-bindings/clock/qcom,lcc-msm8960.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + slim at 28080000 {
> + compatible = "qcom,apq8064-slim", "qcom,slim";
> + reg = <0x28080000 0x2000>, <0x80207c 4>;
> + reg-names = "ctrl", "slew";
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
> + clock-names = "iface", "core";
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + audio-codec at 1,0 {
> + compatible = "slim217,60";
> + reg = <1 0>;
> + };
> + };
> + };
More information about the Alsa-devel
mailing list