[PATCH v4 1/3] arm64: dts: qcom: Update soundwire slave node names

[Krzysztof Kozlowski]

On 07/11/2022 15:20, Srinivasa Rao Mandadapu wrote:
> Update soundwire slave nodes of WSA speaker to match with
> dt-bindings pattern properties regular expression.
> 
> This modifiction is required to avoid dtbs-check errors
> occurred with qcom,soundwire.yaml.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam at quicinc.com>
> Co-developed-by: Ratna Deepthi Kudaravalli <quic_rkudarav at quicinc.com>
> Signed-off-by: Ratna Deepthi Kudaravalli <quic_rkudarav at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qrb5165-rb5.dts             | 4 ++--
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts           | 4 ++--
>  arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 4 ++--
>  arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts     | 4 ++--
>  arch/arm64/boot/dts/qcom/sm8250-mtp.dts              | 4 ++--
>  5 files changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> index 2c08500..983e8a9 100644
> --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
> @@ -1007,7 +1007,7 @@
>  };
>  
>  &swr0 {
> -	left_spkr: wsa8810-left {
> +	left_spkr: wsa8810 at 0,3 {

While changing it, make the node names generic, so:

speaker at 0,3

https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

>  		compatible = "sdw10217211000";
>  		reg = <0 3>;
>  		powerdown-gpios = <&tlmm 130 GPIO_ACTIVE_HIGH>;
> @@ -1016,7 +1016,7 @@
>  		#sound-dai-cells = <0>;
>  	};
>  
> -	right_spkr: wsa8810-right {
> +	right_spkr: wsa8810 at 0,4 {

speaker at 0,4

and so on...

Best regards,
Krzysztof