[PATCH v1 1/2] dt-bindings: dsp: mediatek: Add default clock sources for mt8186 dsp

[AngeloGioacchino Del Regno]

Il 01/11/22 07:11, Tinghan Shen ha scritto:
> Add the default clock sources used by mt8186 dsp.
> 
> Signed-off-by: Tinghan Shen <tinghan.shen at mediatek.com>
> ---
>   .../devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml | 12 +++++++++---
>   1 file changed, 9 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> index 3e63f79890b4..4cc0634c876b 100644
> --- a/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> +++ b/Documentation/devicetree/bindings/dsp/mediatek,mt8186-dsp.yaml
> @@ -35,11 +35,15 @@ properties:
>       items:
>         - description: mux for audio dsp clock
>         - description: mux for audio dsp local bus
> +      - description: default clock source for dsp local bus
> +      - description: default clock source for dsp core
>   
>     clock-names:
>       items:
>         - const: audiodsp
>         - const: adsp_bus
> +      - const: mainpll_d2_d2
> +      - const: clk26m
>   
>     power-domains:
>       maxItems: 1
> @@ -82,9 +86,11 @@ examples:
>                 <0x1068f000 0x1000>;
>           reg-names = "cfg", "sram", "sec", "bus";
>           clocks = <&topckgen CLK_TOP_AUDIODSP>,
> -                 <&topckgen CLK_TOP_ADSP_BUS>;
> -        clock-names = "audiodsp",
> -                      "adsp_bus";
> +                 <&topckgen CLK_TOP_ADSP_BUS>,
> +                 <&topckgen CLK_TOP_MAINPLL_D2_D2>,
> +                 <&clk26m>;
> +        clock-names = "audiodsp", "adsp_bus",
> +                      "mainpll_d2_d2", "clk26m";

You are assigning those clocks just to be able to call clk_set_parent() in
the DSP mt8186-clk driver... and that's not necessary, nor it is the best
way of doing what you're trying to.

In reality, you don't need to add new clocks and you don't need to manage
that into the driver, as you can simply assign clock parents in devicetree
... like:

assigned-clocks = <&topckgen CLK_TOP_AUDIODSP>, <&topckgen CLK_TOP_ADSP_BUS>;
assigned-clock-parents = <&clk26m>, <&topckgen CLK_TOP_MAINPLL_D2_D2>;

without any clk_set_parent() call in the driver.

When the driver will call clk_prepare_enable() for top_audiodsp and/or for
top_adsp_bus, the assigned parents' refcount will also be increased (and
if the parent clock is not enabled, the clk framework will enable it).

Regards,
Angelo