[PATCH v2] ASoC: dt-bindings: mediatek: mt8192: Add i2s-share properties

[Krzysztof Kozlowski]

On 09/05/2022 22:58, Nícolas F. R. A. Prado wrote:
> The Mediatek AFE PCM controller for MT8192 allows two I2S interfaces to
> share the same clock and act as a single interface with both input and
> output. Add patterns for these properties in the dt-binding. The
> property is split into two patterns in order to allow all valid
> interface pairings.
> 
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>
> 
> ---
> The series from v1 of this patch was merged although some changes were
> still needed in this patch, so the v1 of this patch was reverted [1] and
> this standalone commit addresses the feedback from v1 and readds the
> property.
> 
> [1] https://lore.kernel.org/all/20220509185625.580811-1-nfraprado@collabora.com
> 
> v1: https://lore.kernel.org/all/20220429203039.2207848-2-nfraprado@collabora.com/
> 
> Changes in v2:
> - Added "mediatek," prefix to property
> - Rewrote and added more information to property description
> - Split into two patterns to validate that output-input pairings are
>   done
> 
>  .../bindings/sound/mt8192-afe-pcm.yaml           | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> index 7a25bc9b8060..2abf43c6c2c3 100644
> --- a/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> +++ b/Documentation/devicetree/bindings/sound/mt8192-afe-pcm.yaml
> @@ -54,6 +54,22 @@ properties:
>        - const: aud_infra_clk
>        - const: aud_infra_26m_clk
>  
> +patternProperties:
> +  "^mediatek,i2s[13579]-share$":
> +    description:
> +      Each I2S interface has a single data line, input if its index is even or
> +      output if the index is odd. An input and an output I2S interface can be
> +      used together as if they were a single I2S interface with both input and
> +      output data lines by sharing the same clock. This property represents this
> +      pairing. The value should be the name of the interface whose clock is
> +      used, and the property name the other interface that depends on this
> +      clock.
> +    pattern: "^I2S[0268]$"
> +
> +  "^mediatek,i2s[0268]-share$":
> +    description: Same as above.
> +    pattern: "^I2S[13579]$"

Rob's question is still valid - why these are not phandles?

In any case you miss $ref.


Best regards,
Krzysztof