[PATCH] dt-bindings: Fix properties without any type

[Sebastian Reichel]

Hi,

On Thu, May 19, 2022 at 04:14:11PM -0500, Rob Herring wrote:
> Now that the schema tools can extract type information for all
> properties (in order to decode dtb files), finding properties missing
> any type definition is fairly trivial though not yet automated.
> 
> Fix the various property schemas which are missing a type. Most of these
> tend to be device specific properties which don't have a vendor prefix.
> A vendor prefix is how we normally ensure a type is defined.
> 
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
>  .../arm/hisilicon/controller/hip04-bootwrapper.yaml       | 5 +++--
>  .../bindings/display/bridge/toshiba,tc358768.yaml         | 1 +
>  .../devicetree/bindings/display/panel/panel-timing.yaml   | 5 +++++
>  .../bindings/display/panel/raydium,rm67191.yaml           | 1 +
>  .../bindings/display/panel/samsung,s6e8aa0.yaml           | 1 +
>  .../devicetree/bindings/gpio/fairchild,74hc595.yaml       | 1 +
>  .../devicetree/bindings/input/google,cros-ec-keyb.yaml    | 1 +
>  .../devicetree/bindings/input/matrix-keymap.yaml          | 4 ++++
>  Documentation/devicetree/bindings/media/i2c/adv7604.yaml  | 3 ++-
>  Documentation/devicetree/bindings/mux/reg-mux.yaml        | 8 ++++++--
>  Documentation/devicetree/bindings/net/cdns,macb.yaml      | 1 +
>  Documentation/devicetree/bindings/net/ingenic,mac.yaml    | 1 +
>  .../devicetree/bindings/net/ti,davinci-mdio.yaml          | 1 +
>  .../devicetree/bindings/net/wireless/ti,wlcore.yaml       | 2 ++
>  .../devicetree/bindings/pci/snps,dw-pcie-ep.yaml          | 6 ++++--
>  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml   | 2 ++
>  .../devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml    | 2 ++
>  Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml | 1 +
>  .../devicetree/bindings/power/supply/battery.yaml         | 7 ++++++-
>  .../devicetree/bindings/power/supply/charger-manager.yaml | 1 +
>  Documentation/devicetree/bindings/rng/st,stm32-rng.yaml   | 1 +
>  Documentation/devicetree/bindings/serial/8250.yaml        | 1 +
>  .../devicetree/bindings/sound/audio-graph-card2.yaml      | 3 +++
>  .../devicetree/bindings/sound/imx-audio-hdmi.yaml         | 3 +++
>  Documentation/devicetree/bindings/usb/smsc,usb3503.yaml   | 1 +
>  25 files changed, 55 insertions(+), 8 deletions(-)

For power-supply:

Acked-by: Sebastian Reichel <sebastian.reichel at collabora.com>

-- Sebastian

> 
> diff --git a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
> index 7378159e61df..483caf0ce25b 100644
> --- a/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
> +++ b/Documentation/devicetree/bindings/arm/hisilicon/controller/hip04-bootwrapper.yaml
> @@ -17,14 +17,15 @@ properties:
>        - const: hisilicon,hip04-bootwrapper
>  
>    boot-method:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>      description: |
>        Address and size of boot method.
>        [0]: bootwrapper physical address
>        [1]: bootwrapper size
>        [2]: relocation physical address
>        [3]: relocation size
> -    minItems: 1
> -    maxItems: 2
> +    minItems: 2
> +    maxItems: 4
>  
>  required:
>    - compatible
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> index 3bd670b8e5cd..0b6f5bef120f 100644
> --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
> @@ -58,6 +58,7 @@ properties:
>  
>              properties:
>                data-lines:
> +                $ref: /schemas/types.yaml#/definitions/uint32
>                  enum: [ 16, 18, 24 ]
>  
>        port at 1:
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
> index 7749de95ee40..229e3b36ee29 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
> @@ -146,6 +146,7 @@ properties:
>        Horizontal sync pulse.
>        0 selects active low, 1 selects active high.
>        If omitted then it is not used by the hardware
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1]
>  
>    vsync-active:
> @@ -153,6 +154,7 @@ properties:
>        Vertical sync pulse.
>        0 selects active low, 1 selects active high.
>        If omitted then it is not used by the hardware
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1]
>  
>    de-active:
> @@ -160,6 +162,7 @@ properties:
>        Data enable.
>        0 selects active low, 1 selects active high.
>        If omitted then it is not used by the hardware
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1]
>  
>    pixelclk-active:
> @@ -169,6 +172,7 @@ properties:
>        sample data on rising edge.
>        Use 1 to drive pixel data on rising edge and
>        sample data on falling edge
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1]
>  
>    syncclk-active:
> @@ -179,6 +183,7 @@ properties:
>        sample sync on rising edge of pixel clock.
>        Use 1 to drive sync on rising edge and
>        sample sync on falling edge of pixel clock
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [0, 1]
>  
>    interlaced:
> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> index 745dd247c409..617aa8c8c03a 100644
> --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> @@ -24,6 +24,7 @@ properties:
>  
>    dsi-lanes:
>      description: Number of DSI lanes to be used must be <3> or <4>
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [3, 4]
>  
>    v3p3-supply:
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index ca959451557e..1cdc91b3439f 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -36,6 +36,7 @@ properties:
>  
>    init-delay:
>      description: delay after initialization sequence [ms]
> +    $ref: /schemas/types.yaml#/definitions/uint32
>  
>    panel-width-mm:
>      description: physical panel width [mm]
> diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> index 5fe19fa5f67c..a99e7842ca17 100644
> --- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
> @@ -26,6 +26,7 @@ properties:
>      const: 2
>  
>    registers-number:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      description: Number of daisy-chained shift registers
>  
>    enable-gpios:
> diff --git a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
> index e8f137abb03c..aa61fe64be63 100644
> --- a/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
> +++ b/Documentation/devicetree/bindings/input/google,cros-ec-keyb.yaml
> @@ -31,6 +31,7 @@ properties:
>      type: boolean
>  
>    function-row-physmap:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>      minItems: 1
>      maxItems: 15
>      description: |
> diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> index 6699d5e32dca..9f703bb51e12 100644
> --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml
> @@ -27,6 +27,10 @@ properties:
>        column and linux key-code. The 32-bit big endian cell is packed as:
>            row << 24 | column << 16 | key-code
>  
> +  linux,no-autorepeat:
> +    type: boolean
> +    description: Disable keyrepeat
> +
>    keypad,num-rows:
>      $ref: /schemas/types.yaml#/definitions/uint32
>      description: Number of row lines connected to the keypad controller.
> diff --git a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> index c19d8391e2d5..7589d377c686 100644
> --- a/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/adv7604.yaml
> @@ -60,7 +60,8 @@ properties:
>        enables hot-plug detection.
>  
>    default-input:
> -    maxItems: 1
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [ 0, 1 ]
>      description:
>        Select which input is selected after reset.
>  
> diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
> index 60d5746eb39d..e2f6b11f1254 100644
> --- a/Documentation/devicetree/bindings/mux/reg-mux.yaml
> +++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
> @@ -25,8 +25,12 @@ properties:
>      const: 1
>  
>    mux-reg-masks:
> -    description: an array of register offset and pre-shifted bitfield mask
> -      pairs, each describing a single mux control.
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    items:
> +      items:
> +        - description: register offset
> +        - description: pre-shifted bitfield mask
> +    description: Each entry describes a single mux control.
>  
>    idle-states: true
>  
> diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml
> index 6cd3d853dcba..59fe2789fa44 100644
> --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml
> +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml
> @@ -129,6 +129,7 @@ patternProperties:
>        reset-gpios: true
>  
>        magic-packet:
> +        type: boolean
>          description:
>            Indicates that the hardware supports waking up via magic packet.
>  
> diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
> index 8e52b2e683b8..93b3e991d209 100644
> --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml
> +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml
> @@ -37,6 +37,7 @@ properties:
>      const: stmmaceth
>  
>    mode-reg:
> +    $ref: /schemas/types.yaml#/definitions/phandle
>      description: An extra syscon register that control ethernet interface and timing delay
>  
>    rx-clk-delay-ps:
> diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> index 6f44f9516c36..a339202c5e8e 100644
> --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml
> @@ -34,6 +34,7 @@ properties:
>      maxItems: 1
>  
>    bus_freq:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      maximum: 2500000
>      description: MDIO Bus frequency
>  
> diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
> index 8dd164d10290..d68bb2ec1f7e 100644
> --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
> @@ -54,9 +54,11 @@ properties:
>  
>  
>    ref-clock-frequency:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      description: Reference clock frequency.
>  
>    tcxo-clock-frequency:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      description: TCXO clock frequency.
>  
>    clock-xtal:
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
> index e59059ab5be0..b78535040f04 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
> @@ -55,13 +55,15 @@ properties:
>        Translation Unit) registers.
>  
>    num-ib-windows:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 256
>      description: number of inbound address translation windows
> -    maxItems: 1
>      deprecated: true
>  
>    num-ob-windows:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 256
>      description: number of outbound address translation windows
> -    maxItems: 1
>      deprecated: true
>  
>  required:
> diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> index a5345c494744..c90e5e2d25f6 100644
> --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
> @@ -68,6 +68,8 @@ properties:
>        Translation Unit) registers.
>  
>    num-viewport:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 256
>      description: |
>        number of view ports configured in hardware. If a platform
>        does not specify it, the driver autodetects it.
> diff --git a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> index 53e963e090f2..533b4cfe33d2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/canaan,k210-fpioa.yaml
> @@ -120,6 +120,7 @@ patternProperties:
>        input-schmitt-disable: true
>  
>        input-polarity-invert:
> +        type: boolean
>          description:
>            Enable or disable pin input polarity inversion.
>  
> @@ -132,6 +133,7 @@ patternProperties:
>        output-low: true
>  
>        output-polarity-invert:
> +        type: boolean
>          description:
>            Enable or disable pin output polarity inversion.
>  
> diff --git a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
> index 3301fa0c2653..301db7daf870 100644
> --- a/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
> +++ b/Documentation/devicetree/bindings/power/avs/qcom,cpr.yaml
> @@ -51,6 +51,7 @@ properties:
>        supported by the CPR power domain.
>  
>    acc-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
>      description: A phandle to the syscon used for writing ACC settings.
>  
>    nvmem-cells:
> diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
> index d56ac484fec5..491488e7b970 100644
> --- a/Documentation/devicetree/bindings/power/supply/battery.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
> @@ -85,8 +85,13 @@ properties:
>      description: battery factory internal resistance
>  
>    resistance-temp-table:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    items:
> +      items:
> +        - description: the temperature in degree Celsius
> +        - description: battery internal resistance percent
>      description: |
> -      An array providing the temperature in degree Celsius
> +      A table providing the temperature in degree Celsius
>        and corresponding battery internal resistance percent, which is used to
>        look up the resistance percent according to current temperature to get an
>        accurate batterty internal resistance in different temperatures.
> diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
> index c863cfa67865..fbb2204769aa 100644
> --- a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
> @@ -36,6 +36,7 @@ properties:
>  
>    cm-poll-mode:
>      description: polling mode
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      default: 0
>      enum:
>        - 0 # disabled
> diff --git a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
> index 9a6e4eaf4d3c..fcd86f822a9c 100644
> --- a/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
> +++ b/Documentation/devicetree/bindings/rng/st,stm32-rng.yaml
> @@ -27,6 +27,7 @@ properties:
>      maxItems: 1
>  
>    clock-error-detect:
> +    type: boolean
>      description: If set enable the clock detection management
>  
>  required:
> diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
> index 3bab2f27b970..5f6b113d378f 100644
> --- a/Documentation/devicetree/bindings/serial/8250.yaml
> +++ b/Documentation/devicetree/bindings/serial/8250.yaml
> @@ -138,6 +138,7 @@ properties:
>      description: The current active speed of the UART.
>  
>    reg-offset:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      description: |
>        Offset to apply to the mapbase from the start of the registers.
>  
> diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
> index f7e94b1e0e4b..7416067c945e 100644
> --- a/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
> +++ b/Documentation/devicetree/bindings/sound/audio-graph-card2.yaml
> @@ -24,10 +24,13 @@ properties:
>        connection's sink, the second being the connection's source.
>      $ref: /schemas/types.yaml#/definitions/non-unique-string-array
>    multi:
> +    type: object
>      description: Multi-CPU/Codec node
>    dpcm:
> +    type: object
>      description: DPCM node
>    codec2codec:
> +    type: object
>      description: Codec to Codec node
>  
>  required:
> diff --git a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
> index d5474f83ac2c..e7e7bb65c366 100644
> --- a/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
> +++ b/Documentation/devicetree/bindings/sound/imx-audio-hdmi.yaml
> @@ -20,9 +20,11 @@ properties:
>      description: User specified audio sound card name
>  
>    audio-cpu:
> +    $ref: /schemas/types.yaml#/definitions/phandle
>      description: The phandle of an CPU DAI controller
>  
>    hdmi-out:
> +    type: boolean
>      description: |
>        This is a boolean property. If present, the transmitting function
>        of HDMI will be enabled, indicating there's a physical HDMI out
> @@ -30,6 +32,7 @@ properties:
>        block, such as an HDMI encoder or display-controller.
>  
>    hdmi-in:
> +    type: boolean
>      description: |
>        This is a boolean property. If present, the receiving function of
>        HDMI will be enabled, indicating there is a physical HDMI in
> diff --git a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
> index b9e219829801..321b6f166197 100644
> --- a/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
> +++ b/Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
> @@ -45,6 +45,7 @@ properties:
>        property if all ports have to be enabled.
>  
>    initial-mode:
> +    $ref: /schemas/types.yaml#/definitions/uint32
>      enum: [1, 2]
>      description: >
>        Specifies initial mode. 1 for Hub mode, 2 for standby mode.
> -- 
> 2.34.1
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20220523/cc6c1e49/attachment-0001.sig>