Is it possible to set the CM6533 so it has 96 kHz sample rate on capture and 48 kHz for playback using ALSA?

[Rob Frohne]

Hi All,

I found this thread 
<https://www.alsa-project.org/pipermail/alsa-devel/2017-November/127289.html> 
on the list that explains why I cannot get 96 kHz sampling with the 
C-media CM6533.  Reading the datasheet 
<cid:part1.SZL6HGoZ.u1f9OjPs at wallawalla.edu> it is tempting to think the 
mode I need for my class QSD SDR receiver project, (96 kHz sample rate 
on capture and 48 kHz for playback could be selected perhaps by ALSA in 
the HID interface). Is this possible to do with ALSA somehow?

The sound cards I purchased for my class on Amazon from Syba, used to 
use Via VT1620a codecs, but now have been redesigned to use the C-media 
CM6533, and these have the limitation that will not allow 96 kHz 
sampling on both capture and playback.  I need to change the present 
setting (96 kHz playback, 48 kHz capture) to the opposite.  Page 7 of 
the datasheet has a note about this.

Thanks,

Rob

-- 
Rob Frohne, PhD, PE
Professor
EF Cross School of Engineering
Walla Walla University
100 SW 4th Street
College Place, WA 99324
(509) 527-2075