[PATCH v5 2/2] Add generic serial MIDI driver using serial bus API
Daniel Kaehn
kaehndan at gmail.com
Mon May 2 17:04:04 CEST 2022
Generic serial MIDI driver adding support for using serial devices
compatible with the serial bus as raw MIDI devices, allowing using
additional serial devices not compatible with the existing
serial-u16550 driver. Supports only setting standard serial baudrates on
the underlying serial device; however, the underlying serial device can
be configured so that a requested 38.4 kBaud is actually the standard MIDI
31.25 kBaud. Supports DeviceTree configuration.
Signed-off-by: Daniel Kaehn <kaehndan at gmail.com>
---
sound/drivers/Kconfig | 18 ++
sound/drivers/Makefile | 2 +
sound/drivers/serial-generic.c | 377 +++++++++++++++++++++++++++++++++
3 files changed, 397 insertions(+)
create mode 100644 sound/drivers/serial-generic.c
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index ca4cdf666f82..060e7d3f2439 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -165,6 +165,24 @@ config SND_SERIAL_U16550
To compile this driver as a module, choose M here: the module
will be called snd-serial-u16550.
+config SND_SERIAL_GENERIC
+ tristate "Generic serial MIDI driver"
+ depends on SERIAL_DEV_BUS
+ depends on OF
+ select SND_RAWMIDI
+ help
+ To include support for mapping generic serial devices as raw
+ ALSA MIDI devices, say Y here. The driver only supports setting
+ the serial port to standard baudrates. To attain the standard MIDI
+ baudrate of 31.25 kBaud, configure the clock of the underlying serial
+ device so that a requested 38.4 kBaud will result in the standard speed.
+
+ Use this devicetree binding to configure serial port mapping
+ <file:Documentation/devicetree/bindings/sound/serialmidi.yaml>
+
+ To compile this driver as a module, choose M here: the module
+ will be called snd-serial-generic.
+
config SND_MPU401
tristate "Generic MPU-401 UART driver"
select SND_MPU401_UART
diff --git a/sound/drivers/Makefile b/sound/drivers/Makefile
index c0fe4eccdaef..b60303180a1b 100644
--- a/sound/drivers/Makefile
+++ b/sound/drivers/Makefile
@@ -10,6 +10,7 @@ snd-mtpav-objs := mtpav.o
snd-mts64-objs := mts64.o
snd-portman2x4-objs := portman2x4.o
snd-serial-u16550-objs := serial-u16550.o
+snd-serial-generic-objs := serial-generic.o
snd-virmidi-objs := virmidi.o
# Toplevel Module Dependency
@@ -17,6 +18,7 @@ obj-$(CONFIG_SND_DUMMY) += snd-dummy.o
obj-$(CONFIG_SND_ALOOP) += snd-aloop.o
obj-$(CONFIG_SND_VIRMIDI) += snd-virmidi.o
obj-$(CONFIG_SND_SERIAL_U16550) += snd-serial-u16550.o
+obj-$(CONFIG_SND_SERIAL_GENERIC) += snd-serial-generic.o
obj-$(CONFIG_SND_MTPAV) += snd-mtpav.o
obj-$(CONFIG_SND_MTS64) += snd-mts64.o
obj-$(CONFIG_SND_PORTMAN2X4) += snd-portman2x4.o
diff --git a/sound/drivers/serial-generic.c b/sound/drivers/serial-generic.c
new file mode 100644
index 000000000000..8168f8a71e15
--- /dev/null
+++ b/sound/drivers/serial-generic.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * serial-generic.c
+ * Copyright (c) by Daniel Kaehn <kaehndan at gmail.com
+ * Based on serial-u16550.c by Jaroslav Kysela <perex at perex.cz>,
+ * Isaku Yamahata <yamahata at private.email.ne.jp>,
+ * George Hansper <ghansper at apana.org.au>,
+ * Hannu Savolainen
+ *
+ * Generic serial MIDI driver using the serdev serial bus API for hardware interaction
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/serdev.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+#include <linux/dev_printk.h>
+
+#include <sound/core.h>
+#include <sound/rawmidi.h>
+#include <sound/initval.h>
+
+MODULE_DESCRIPTION("Generic serial MIDI driver");
+MODULE_LICENSE("GPL");
+
+
+#define SERIAL_MODE_INPUT_OPEN 1
+#define SERIAL_MODE_OUTPUT_OPEN 2
+#define SERIAL_MODE_INPUT_TRIGGERED 3
+#define SERIAL_MODE_OUTPUT_TRIGGERED 4
+
+
+#define SERIAL_TX_STATE_ACTIVE 1
+#define SERIAL_TX_STATE_WAKEUP 2
+
+
+struct snd_serial_generic {
+ struct serdev_device *serdev;
+
+ struct snd_card *card;
+ struct snd_rawmidi *rmidi;
+ struct snd_rawmidi_substream *midi_output;
+ struct snd_rawmidi_substream *midi_input;
+
+ unsigned int baudrate;
+
+ unsigned long filemode; /* open status of file */
+ struct work_struct tx_work;
+ unsigned long tx_state;
+
+};
+
+static void snd_serial_generic_tx_wakeup(struct snd_serial_generic *drvdata)
+{
+ if (test_and_set_bit(SERIAL_TX_STATE_ACTIVE, &drvdata->tx_state))
+ set_bit(SERIAL_TX_STATE_WAKEUP, &drvdata->tx_state);
+
+ schedule_work(&drvdata->tx_work);
+}
+
+#define INTERNAL_BUF_SIZE 256
+
+static void snd_serial_generic_tx_work(struct work_struct *work)
+{
+ static char buf[INTERNAL_BUF_SIZE];
+ int num_bytes;
+ struct snd_serial_generic *drvdata = container_of(work, struct snd_serial_generic,
+ tx_work);
+ struct snd_rawmidi_substream *substream = drvdata->midi_output;
+
+ clear_bit(SERIAL_TX_STATE_WAKEUP, &drvdata->tx_state);
+
+ while (!snd_rawmidi_transmit_empty(substream)) {
+ num_bytes = snd_rawmidi_transmit_peek(substream, buf, INTERNAL_BUF_SIZE);
+ num_bytes = serdev_device_write_buf(drvdata->serdev, buf, num_bytes);
+
+ if (!num_bytes)
+ break;
+
+ snd_rawmidi_transmit_ack(substream, num_bytes);
+
+ if (!test_bit(SERIAL_TX_STATE_WAKEUP, &drvdata->tx_state))
+ break;
+ }
+
+ clear_bit(SERIAL_TX_STATE_ACTIVE, &drvdata->tx_state);
+}
+
+static void snd_serial_generic_write_wakeup(struct serdev_device *serdev)
+{
+ struct snd_serial_generic *drvdata = serdev_device_get_drvdata(serdev);
+
+ snd_serial_generic_tx_wakeup(drvdata);
+}
+
+static int snd_serial_generic_receive_buf(struct serdev_device *serdev,
+ const unsigned char *buf, size_t count)
+{
+ int ret;
+ struct snd_serial_generic *drvdata = serdev_device_get_drvdata(serdev);
+
+ ret = snd_rawmidi_receive(drvdata->midi_input, buf, count);
+ return ret < 0 ? 0 : ret;
+}
+
+static const struct serdev_device_ops snd_serial_generic_serdev_device_ops = {
+ .receive_buf = snd_serial_generic_receive_buf,
+ .write_wakeup = snd_serial_generic_write_wakeup
+};
+
+
+static int snd_serial_generic_ensure_serdev_open(struct snd_serial_generic *drvdata)
+{
+ int err;
+ unsigned int actual_baud;
+
+ if (!drvdata->filemode) {
+ dev_dbg(drvdata->card->dev, "DEBUG - Opening serial port for card %s\n",
+ drvdata->card->shortname);
+ err = serdev_device_open(drvdata->serdev);
+ if (err < 0)
+ return err;
+ if (drvdata->baudrate) {
+ actual_baud = serdev_device_set_baudrate(drvdata->serdev,
+ drvdata->baudrate);
+ if (actual_baud != drvdata->baudrate) {
+ dev_warn(drvdata->card->dev, "requested %d baud for card %s but it was actually set to %d\n",
+ drvdata->baudrate, drvdata->card->shortname, actual_baud);
+ }
+ }
+ }
+ return 0;
+}
+
+static int snd_serial_generic_input_open(struct snd_rawmidi_substream *substream)
+{
+ int err;
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ dev_dbg(drvdata->card->dev, "DEBUG - Opening input for card %s\n",
+ drvdata->card->shortname);
+
+ err = snd_serial_generic_ensure_serdev_open(drvdata);
+ if (err < 0)
+ return err;
+
+ set_bit(SERIAL_MODE_INPUT_OPEN, &drvdata->filemode);
+ drvdata->midi_input = substream;
+ return 0;
+}
+
+static int snd_serial_generic_input_close(struct snd_rawmidi_substream *substream)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ clear_bit(SERIAL_MODE_INPUT_OPEN, &drvdata->filemode);
+
+ drvdata->midi_input = NULL;
+
+ if (!drvdata->filemode)
+ serdev_device_close(drvdata->serdev);
+ return 0;
+}
+
+static void snd_serial_generic_input_trigger(struct snd_rawmidi_substream *substream,
+ int up)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ if (up)
+ set_bit(SERIAL_MODE_INPUT_TRIGGERED, &drvdata->filemode);
+ else
+ clear_bit(SERIAL_MODE_INPUT_TRIGGERED, &drvdata->filemode);
+}
+
+static int snd_serial_generic_output_open(struct snd_rawmidi_substream *substream)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+ int err;
+
+ dev_dbg(drvdata->card->dev, "DEBUG - Opening output for card %s\n",
+ drvdata->card->shortname);
+
+ err = snd_serial_generic_ensure_serdev_open(drvdata);
+ if (err < 0)
+ return err;
+
+ set_bit(SERIAL_MODE_OUTPUT_OPEN, &drvdata->filemode);
+
+ drvdata->midi_output = substream;
+ return 0;
+};
+
+static int snd_serial_generic_output_close(struct snd_rawmidi_substream *substream)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ dev_dbg(drvdata->card->dev, "DEBUG - output close called\n");
+ clear_bit(SERIAL_MODE_INPUT_OPEN, &drvdata->filemode);
+
+ if (!drvdata->filemode)
+ serdev_device_close(drvdata->serdev);
+
+ drvdata->midi_output = NULL;
+
+ return 0;
+};
+
+static void snd_serial_generic_output_trigger(struct snd_rawmidi_substream *substream,
+ int up)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ dev_dbg(drvdata->card->dev, "DEBUG - Output trigger called with %d\n", up);
+
+ if (up)
+ set_bit(SERIAL_MODE_OUTPUT_TRIGGERED, &drvdata->filemode);
+ else
+ clear_bit(SERIAL_MODE_OUTPUT_TRIGGERED, &drvdata->filemode);
+
+ if (up)
+ snd_serial_generic_tx_wakeup(drvdata);
+}
+
+
+static void snd_serial_generic_output_drain(struct snd_rawmidi_substream *substream)
+{
+ struct snd_serial_generic *drvdata = substream->rmidi->card->private_data;
+
+ dev_dbg(drvdata->card->dev, "DEBUG - output drain called\n");
+
+ /* Flush any pending characters */
+ serdev_device_write_flush(drvdata->serdev);
+ cancel_work_sync(&drvdata->tx_work);
+}
+
+
+static const struct snd_rawmidi_ops snd_serial_generic_output = {
+ .open = snd_serial_generic_output_open,
+ .close = snd_serial_generic_output_close,
+ .trigger = snd_serial_generic_output_trigger,
+ .drain = snd_serial_generic_output_drain,
+};
+
+static const struct snd_rawmidi_ops snd_serial_generic_input = {
+ .open = snd_serial_generic_input_open,
+ .close = snd_serial_generic_input_close,
+ .trigger = snd_serial_generic_input_trigger,
+};
+
+
+static void snd_serial_generic_parse_dt(struct serdev_device *serdev,
+ struct snd_serial_generic *drvdata)
+{
+ int err;
+
+ if (serdev->dev.of_node) {
+ err = of_property_read_u32(serdev->dev.of_node, "current-speed",
+ &drvdata->baudrate);
+ if (err < 0) {
+ dev_warn(drvdata->card->dev,
+ "MIDI device reading of current-speed DT param failed with error %d, using default baudrate of serial device\n",
+ err);
+ drvdata->baudrate = 0;
+ }
+ } else {
+ dev_info(drvdata->card->dev, "MIDI device current-speed DT param not set for %s, using default baudrate of serial device\n",
+ drvdata->card->shortname);
+ drvdata->baudrate = 0;
+ }
+}
+
+static void snd_serial_generic_substreams(struct snd_rawmidi_str *stream, int dev_num)
+{
+ struct snd_rawmidi_substream *substream;
+
+ list_for_each_entry(substream, &stream->substreams, list) {
+ sprintf(substream->name, "Serial MIDI %d-%d", dev_num, substream->number);
+ }
+}
+
+static int snd_serial_generic_rmidi(struct snd_serial_generic *drvdata,
+ int outs, int ins, struct snd_rawmidi **rmidi)
+{
+ struct snd_rawmidi *rrawmidi;
+ int err;
+
+ err = snd_rawmidi_new(drvdata->card, drvdata->card->driver, 0,
+ outs, ins, &rrawmidi);
+
+ if (err < 0)
+ return err;
+
+ snd_rawmidi_set_ops(rrawmidi, SNDRV_RAWMIDI_STREAM_INPUT,
+ &snd_serial_generic_input);
+ snd_rawmidi_set_ops(rrawmidi, SNDRV_RAWMIDI_STREAM_OUTPUT,
+ &snd_serial_generic_output);
+ strcpy(rrawmidi->name, drvdata->card->shortname);
+
+ snd_serial_generic_substreams(&rrawmidi->streams[SNDRV_RAWMIDI_STREAM_OUTPUT],
+ drvdata->serdev->ctrl->nr);
+ snd_serial_generic_substreams(&rrawmidi->streams[SNDRV_RAWMIDI_STREAM_INPUT],
+ drvdata->serdev->ctrl->nr);
+
+ rrawmidi->info_flags = SNDRV_RAWMIDI_INFO_OUTPUT |
+ SNDRV_RAWMIDI_INFO_INPUT |
+ SNDRV_RAWMIDI_INFO_DUPLEX;
+
+ if (rmidi)
+ *rmidi = rrawmidi;
+ return 0;
+}
+
+static int snd_serial_generic_probe(struct serdev_device *serdev)
+{
+ struct snd_card *card;
+ struct snd_serial_generic *drvdata;
+ int err;
+
+ err = snd_devm_card_new(&serdev->dev, SNDRV_DEFAULT_IDX1,
+ SNDRV_DEFAULT_STR1, THIS_MODULE,
+ sizeof(struct snd_serial_generic), &card);
+
+ if (err < 0)
+ return err;
+
+ strcpy(card->driver, "SerialMIDI");
+ sprintf(card->shortname, "SerialMIDI-%d", serdev->ctrl->nr);
+ sprintf(card->longname, "Serial MIDI device at serial%d", serdev->ctrl->nr);
+
+ drvdata = card->private_data;
+
+ drvdata->serdev = serdev;
+ drvdata->card = card;
+
+ snd_serial_generic_parse_dt(serdev, drvdata);
+
+ INIT_WORK(&drvdata->tx_work, snd_serial_generic_tx_work);
+
+ err = snd_serial_generic_rmidi(drvdata, 1, 1, &drvdata->rmidi);
+ if (err < 0)
+ return err;
+
+ err = snd_card_register(card);
+ if (err < 0)
+ return err;
+
+ serdev_device_set_client_ops(serdev, &snd_serial_generic_serdev_device_ops);
+ serdev_device_set_drvdata(drvdata->serdev, drvdata);
+
+ return 0;
+}
+
+#define SND_SERIAL_GENERIC_DRIVER "snd-serial-generic"
+
+static const struct of_device_id snd_serial_generic_dt_ids[] = {
+ { .compatible = "serialmidi" },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, snd_serial_generic_dt_ids);
+
+static struct serdev_device_driver snd_serial_generic_driver = {
+ .driver = {
+ .name = SND_SERIAL_GENERIC_DRIVER,
+ .of_match_table = of_match_ptr(snd_serial_generic_dt_ids),
+ },
+ .probe = snd_serial_generic_probe,
+};
+
+module_serdev_device_driver(snd_serial_generic_driver);
--
2.33.0
More information about the Alsa-devel
mailing list