[RFC PATCH v2 3/6] ASoC: dt-bindings: Extend clock bindings of rt5659

[Krzysztof Kozlowski]

On 28/03/2022 09:58, Sameer Pujar wrote:
> 
> On 28-03-2022 12:36, Krzysztof Kozlowski wrote:
>> External email: Use caution opening links or attachments
>>
>>
>> On 28/03/2022 08:14, Sameer Pujar wrote:
>>> The rt5658 or rt5659 CODEC system clock (SYSCLK) can be derived from
>>> various clock sources. For example it can be derived either from master
>>> clock (MCLK) or by internal PLL. The internal PLL again can take input
>>> clock references from bit clocks (BCLKs) and MCLK. To enable a flexible
>>> clocking configuration the DT binding is extended here.
>>>
>>> It makes use of standard clock bindings and sets up the clock relation
>>> via DT.
>>>
>>> Signed-off-by: Sameer Pujar <spujar at nvidia.com>
>>> Cc: Oder Chiou <oder_chiou at realtek.com>
>>> ---
>>>   .../devicetree/bindings/sound/realtek,rt5659.yaml  | 53 ++++++++++++++++++++--
>>>   1 file changed, 49 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
>>> index b0485b8..0c2f3cb 100644
>>> --- a/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
>>> +++ b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
>>> @@ -29,12 +29,28 @@ properties:
>>>       maxItems: 1
>>>
>>>     clocks:
>>> -    items:
>>> -      - description: Master clock (MCLK) to the CODEC
>>> +    description: |
>>> +      CODEC can receive multiple clock inputs like Master
>>> +      clock (MCLK), I2S bit clocks (BCLK1, BCLK2, BCLK3,
>>> +      BCLK4). The CODEC SYSCLK can be generated from MCLK
>>> +      or internal PLL. In turn PLL can reference from MCLK
>>> +      and BCLKs.
>>>
>>>     clock-names:
>>> -    items:
>>> -      - const: mclk
>>> +    description: |
>>> +      The clock names can be combination of following:
>>> +        "mclk"        : Master clock
>>> +        "pll_ref"     : Reference to CODEC PLL clock
>>> +        "sysclk"      : CODEC SYSCLK
>>> +        "^bclk[1-4]$" : Bit clocks to CODEC
>> No, that does not look correct. You allow anything as clock input (even
>> 20 clocks, different names, any order). That's not how DT schema should
>> work and that's not how hardware looks like.
> 
>>
>> Usually the clock inputs are always there which also you mentioned in
>> description - "multiple clock inputs". All these clocks should be
>> expected, unless really the wires (physical wires) can be left disconnected.
> 
> The CODEC can receive multiple clocks but all the input clocks need not 
> be present or connected always. If a specific configuration is needed 
> and platform supports such an input, then all these inputs can be added. 
> I don't know how to define this detail in the schema. If I make all of 
> them expected, then binding check throws errors. If I were to list all 
> the possible combinations, the list is going to be big (not sure if this 
> would be OK?).

Thanks for explanation. Please differentiate between these two:
1. clock inputs connected, but unused (not needed for driver or for
particular use case),
2. clock inputs really not connected.

For the 1. above, such clock inputs should still be listed in the
bindings and DTS. For the 2. above, such clocks should actually not be
there. How to achieve this depends on number of your combinations. IOW,
how many clocks are physically optional. For some small number of
variations this can be:
oneOf:
 - const: mclk
 - items:
   - const: mclk
   - enum:
       - bclk1
       - bclk2
       - bclk3
       - bclk4
 - items:
   - const: mclk
   - const: pll_ref
   - enum:
       - bclk1
       - bclk2
       - bclk3
       - bclk4

For a total flexibility that any clock input can be disconnected, this
should be a list of enums I guess (with minItems). However please find
the clocks always connected and include them if possible in a fixed way
(like this oneOf above).


Best regards,
Krzysztof