[PATCH v10 5/7] pinctrl: qcom: Extract chip specific LPASS LPI code
Bjorn Andersson
bjorn.andersson at linaro.org
Tue Mar 8 19:02:10 CET 2022
On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote:
> Extract the chip specific SM8250 data from the LPASS LPI pinctrl driver
> to allow reusing the common code in the addition of subsequent
> platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam at quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu at quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu at quicinc.com>
> Reported-by: kernel test robot <lkp at intel.com>
I don't believe that lkp reported something that resulted in you writing
this patch.
> ---
> drivers/pinctrl/qcom/Kconfig | 8 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 233 +-----------------------
> drivers/pinctrl/qcom/pinctrl-lpass-lpi.h | 85 +++++++++
> drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c | 165 +++++++++++++++++
> 5 files changed, 264 insertions(+), 228 deletions(-)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> create mode 100644 drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
>
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 31c4aa6..3c7b163 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -329,6 +329,14 @@ config PINCTRL_SM8250
> Qualcomm Technologies Inc TLMM block found on the Qualcomm
> Technologies Inc SM8250 platform.
>
> +config PINCTRL_SM8250_LPASS_LPI
> + tristate "Qualcomm Technologies Inc SM8250 LPASS LPI pin controller driver"
> + select PINCTRL_LPASS_LPI
You shouldn't select user selectable options, so this should be "depends
on PINCTRL_LPASS_LPI".
That said, PINCTRL_LPASS_LPI doesn't actually do anything on its own, so
it would would be nicer to make PINCTRL_LPASS_LPI not be user selectable
and keep the select PINCTRL_LPASS_LPI here. (You would also need depends
on GPIOLIB here though).
With that I think this patch looks good.
Regards,
Bjorn
> + help
> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> + Qualcomm Technologies Inc LPASS (Low Power Audio SubSystem) LPI
> + (Low Power Island) found on the Qualcomm Technologies Inc SM8250 platform.
> +
> config PINCTRL_SM8350
> tristate "Qualcomm Technologies Inc SM8350 pin controller driver"
> depends on PINCTRL_MSM
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 709882f..39650d6 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_SM6350) += pinctrl-sm6350.o
> obj-$(CONFIG_PINCTRL_SDX65) += pinctrl-sdx65.o
> obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o
> obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o
> +obj-$(CONFIG_PINCTRL_SM8250_LPASS_LPI) += pinctrl-sm8250-lpass-lpi.o
> obj-$(CONFIG_PINCTRL_SM8350) += pinctrl-sm8350.o
> obj-$(CONFIG_PINCTRL_SM8450) += pinctrl-sm8450.o
> obj-$(CONFIG_PINCTRL_LPASS_LPI) += pinctrl-lpass-lpi.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> index 54750ba..1ab572f 100644
> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> @@ -4,91 +4,15 @@
> * Copyright (c) 2020 Linaro Ltd.
> */
>
> -#include <linux/bitops.h>
> -#include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/gpio/driver.h>
> -#include <linux/io.h>
> #include <linux/module.h>
> #include <linux/of_device.h>
> -#include <linux/of.h>
> #include <linux/pinctrl/pinconf-generic.h>
> #include <linux/pinctrl/pinconf.h>
> #include <linux/pinctrl/pinmux.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/types.h>
> -#include "../core.h"
> #include "../pinctrl-utils.h"
> -
> -#define LPI_SLEW_RATE_CTL_REG 0xa000
> -#define LPI_TLMM_REG_OFFSET 0x1000
> -#define LPI_SLEW_RATE_MAX 0x03
> -#define LPI_SLEW_BITS_SIZE 0x02
> -#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
> -#define LPI_GPIO_CFG_REG 0x00
> -#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
> -#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
> -#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
> -#define LPI_GPIO_OE_MASK BIT(9)
> -#define LPI_GPIO_VALUE_REG 0x04
> -#define LPI_GPIO_VALUE_IN_MASK BIT(0)
> -#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
> -
> -#define LPI_GPIO_BIAS_DISABLE 0x0
> -#define LPI_GPIO_PULL_DOWN 0x1
> -#define LPI_GPIO_KEEPER 0x2
> -#define LPI_GPIO_PULL_UP 0x3
> -#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
> -#define LPI_NO_SLEW -1
> -
> -#define LPI_FUNCTION(fname) \
> - [LPI_MUX_##fname] = { \
> - .name = #fname, \
> - .groups = fname##_groups, \
> - .ngroups = ARRAY_SIZE(fname##_groups), \
> - }
> -
> -#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
> - { \
> - .group.name = "gpio" #id, \
> - .group.pins = gpio##id##_pins, \
> - .pin = id, \
> - .slew_offset = soff, \
> - .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \
> - .funcs = (int[]){ \
> - LPI_MUX_gpio, \
> - LPI_MUX_##f1, \
> - LPI_MUX_##f2, \
> - LPI_MUX_##f3, \
> - LPI_MUX_##f4, \
> - }, \
> - .nfuncs = 5, \
> - }
> -
> -struct lpi_pingroup {
> - struct group_desc group;
> - unsigned int pin;
> - /* Bit offset in slew register for SoundWire pins only */
> - int slew_offset;
> - unsigned int *funcs;
> - unsigned int nfuncs;
> -};
> -
> -struct lpi_function {
> - const char *name;
> - const char * const *groups;
> - unsigned int ngroups;
> -};
> -
> -struct lpi_pinctrl_variant_data {
> - const struct pinctrl_pin_desc *pins;
> - int npins;
> - const struct lpi_pingroup *groups;
> - int ngroups;
> - const struct lpi_function *functions;
> - int nfunctions;
> -};
> +#include "pinctrl-lpass-lpi.h"
>
> #define MAX_LPI_NUM_CLKS 2
>
> @@ -104,136 +28,6 @@ struct lpi_pinctrl {
> const struct lpi_pinctrl_variant_data *data;
> };
>
> -/* sm8250 variant specific data */
> -static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
> - PINCTRL_PIN(0, "gpio0"),
> - PINCTRL_PIN(1, "gpio1"),
> - PINCTRL_PIN(2, "gpio2"),
> - PINCTRL_PIN(3, "gpio3"),
> - PINCTRL_PIN(4, "gpio4"),
> - PINCTRL_PIN(5, "gpio5"),
> - PINCTRL_PIN(6, "gpio6"),
> - PINCTRL_PIN(7, "gpio7"),
> - PINCTRL_PIN(8, "gpio8"),
> - PINCTRL_PIN(9, "gpio9"),
> - PINCTRL_PIN(10, "gpio10"),
> - PINCTRL_PIN(11, "gpio11"),
> - PINCTRL_PIN(12, "gpio12"),
> - PINCTRL_PIN(13, "gpio13"),
> -};
> -
> -enum sm8250_lpi_functions {
> - LPI_MUX_dmic1_clk,
> - LPI_MUX_dmic1_data,
> - LPI_MUX_dmic2_clk,
> - LPI_MUX_dmic2_data,
> - LPI_MUX_dmic3_clk,
> - LPI_MUX_dmic3_data,
> - LPI_MUX_i2s1_clk,
> - LPI_MUX_i2s1_data,
> - LPI_MUX_i2s1_ws,
> - LPI_MUX_i2s2_clk,
> - LPI_MUX_i2s2_data,
> - LPI_MUX_i2s2_ws,
> - LPI_MUX_qua_mi2s_data,
> - LPI_MUX_qua_mi2s_sclk,
> - LPI_MUX_qua_mi2s_ws,
> - LPI_MUX_swr_rx_clk,
> - LPI_MUX_swr_rx_data,
> - LPI_MUX_swr_tx_clk,
> - LPI_MUX_swr_tx_data,
> - LPI_MUX_wsa_swr_clk,
> - LPI_MUX_wsa_swr_data,
> - LPI_MUX_gpio,
> - LPI_MUX__,
> -};
> -
> -static int gpio0_pins[] = { 0 };
> -static int gpio1_pins[] = { 1 };
> -static int gpio2_pins[] = { 2 };
> -static int gpio3_pins[] = { 3 };
> -static int gpio4_pins[] = { 4 };
> -static int gpio5_pins[] = { 5 };
> -static int gpio6_pins[] = { 6 };
> -static int gpio7_pins[] = { 7 };
> -static int gpio8_pins[] = { 8 };
> -static int gpio9_pins[] = { 9 };
> -static int gpio10_pins[] = { 10 };
> -static int gpio11_pins[] = { 11 };
> -static int gpio12_pins[] = { 12 };
> -static int gpio13_pins[] = { 13 };
> -static const char * const swr_tx_clk_groups[] = { "gpio0" };
> -static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
> -static const char * const swr_rx_clk_groups[] = { "gpio3" };
> -static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> -static const char * const dmic1_clk_groups[] = { "gpio6" };
> -static const char * const dmic1_data_groups[] = { "gpio7" };
> -static const char * const dmic2_clk_groups[] = { "gpio8" };
> -static const char * const dmic2_data_groups[] = { "gpio9" };
> -static const char * const i2s2_clk_groups[] = { "gpio10" };
> -static const char * const i2s2_ws_groups[] = { "gpio11" };
> -static const char * const dmic3_clk_groups[] = { "gpio12" };
> -static const char * const dmic3_data_groups[] = { "gpio13" };
> -static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> -static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> -static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> -static const char * const i2s1_clk_groups[] = { "gpio6" };
> -static const char * const i2s1_ws_groups[] = { "gpio7" };
> -static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> -static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> -static const char * const wsa_swr_data_groups[] = { "gpio11" };
> -static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
> -
> -static const struct lpi_pingroup sm8250_groups[] = {
> - LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> - LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> - LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> - LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> - LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> - LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> - LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> - LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
> - LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
> - LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
> - LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> - LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> - LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
> - LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
> -};
> -
> -static const struct lpi_function sm8250_functions[] = {
> - LPI_FUNCTION(dmic1_clk),
> - LPI_FUNCTION(dmic1_data),
> - LPI_FUNCTION(dmic2_clk),
> - LPI_FUNCTION(dmic2_data),
> - LPI_FUNCTION(dmic3_clk),
> - LPI_FUNCTION(dmic3_data),
> - LPI_FUNCTION(i2s1_clk),
> - LPI_FUNCTION(i2s1_data),
> - LPI_FUNCTION(i2s1_ws),
> - LPI_FUNCTION(i2s2_clk),
> - LPI_FUNCTION(i2s2_data),
> - LPI_FUNCTION(i2s2_ws),
> - LPI_FUNCTION(qua_mi2s_data),
> - LPI_FUNCTION(qua_mi2s_sclk),
> - LPI_FUNCTION(qua_mi2s_ws),
> - LPI_FUNCTION(swr_rx_clk),
> - LPI_FUNCTION(swr_rx_data),
> - LPI_FUNCTION(swr_tx_clk),
> - LPI_FUNCTION(swr_tx_data),
> - LPI_FUNCTION(wsa_swr_clk),
> - LPI_FUNCTION(wsa_swr_data),
> -};
> -
> -static struct lpi_pinctrl_variant_data sm8250_lpi_data = {
> - .pins = sm8250_lpi_pins,
> - .npins = ARRAY_SIZE(sm8250_lpi_pins),
> - .groups = sm8250_groups,
> - .ngroups = ARRAY_SIZE(sm8250_groups),
> - .functions = sm8250_functions,
> - .nfunctions = ARRAY_SIZE(sm8250_functions),
> -};
> -
> static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
> unsigned int addr)
> {
> @@ -580,7 +374,7 @@ static const struct gpio_chip lpi_gpio_template = {
> .dbg_show = lpi_gpio_dbg_show,
> };
>
> -static int lpi_pinctrl_probe(struct platform_device *pdev)
> +int lpi_pinctrl_probe(struct platform_device *pdev)
> {
> const struct lpi_pinctrl_variant_data *data;
> struct device *dev = &pdev->dev;
> @@ -659,8 +453,9 @@ static int lpi_pinctrl_probe(struct platform_device *pdev)
>
> return ret;
> }
> +EXPORT_SYMBOL_GPL(lpi_pinctrl_probe);
>
> -static int lpi_pinctrl_remove(struct platform_device *pdev)
> +int lpi_pinctrl_remove(struct platform_device *pdev)
> {
> struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
>
> @@ -669,25 +464,7 @@ static int lpi_pinctrl_remove(struct platform_device *pdev)
>
> return 0;
> }
> +EXPORT_SYMBOL_GPL(lpi_pinctrl_remove);
>
> -static const struct of_device_id lpi_pinctrl_of_match[] = {
> - {
> - .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
> - .data = &sm8250_lpi_data,
> - },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> -
> -static struct platform_driver lpi_pinctrl_driver = {
> - .driver = {
> - .name = "qcom-lpass-lpi-pinctrl",
> - .of_match_table = lpi_pinctrl_of_match,
> - },
> - .probe = lpi_pinctrl_probe,
> - .remove = lpi_pinctrl_remove,
> -};
> -
> -module_platform_driver(lpi_pinctrl_driver);
> MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
> MODULE_LICENSE("GPL");
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> new file mode 100644
> index 0000000..afbac2a
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.h
> @@ -0,0 +1,85 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020 Linaro Ltd.
> + */
> +#ifndef __PINCTRL_LPASS_LPI_H__
> +#define __PINCTRL_LPASS_LPI_H__
> +
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> +#include "../core.h"
> +
> +#define LPI_SLEW_RATE_CTL_REG 0xa000
> +#define LPI_TLMM_REG_OFFSET 0x1000
> +#define LPI_SLEW_RATE_MAX 0x03
> +#define LPI_SLEW_BITS_SIZE 0x02
> +#define LPI_SLEW_RATE_MASK GENMASK(1, 0)
> +#define LPI_GPIO_CFG_REG 0x00
> +#define LPI_GPIO_PULL_MASK GENMASK(1, 0)
> +#define LPI_GPIO_FUNCTION_MASK GENMASK(5, 2)
> +#define LPI_GPIO_OUT_STRENGTH_MASK GENMASK(8, 6)
> +#define LPI_GPIO_OE_MASK BIT(9)
> +#define LPI_GPIO_VALUE_REG 0x04
> +#define LPI_GPIO_VALUE_IN_MASK BIT(0)
> +#define LPI_GPIO_VALUE_OUT_MASK BIT(1)
> +
> +#define LPI_GPIO_BIAS_DISABLE 0x0
> +#define LPI_GPIO_PULL_DOWN 0x1
> +#define LPI_GPIO_KEEPER 0x2
> +#define LPI_GPIO_PULL_UP 0x3
> +#define LPI_GPIO_DS_TO_VAL(v) (v / 2 - 1)
> +#define LPI_NO_SLEW -1
> +
> +#define LPI_FUNCTION(fname) \
> + [LPI_MUX_##fname] = { \
> + .name = #fname, \
> + .groups = fname##_groups, \
> + .ngroups = ARRAY_SIZE(fname##_groups), \
> + }
> +
> +#define LPI_PINGROUP(id, soff, f1, f2, f3, f4) \
> + { \
> + .group.name = "gpio" #id, \
> + .group.pins = gpio##id##_pins, \
> + .pin = id, \
> + .slew_offset = soff, \
> + .group.num_pins = ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + LPI_MUX_gpio, \
> + LPI_MUX_##f1, \
> + LPI_MUX_##f2, \
> + LPI_MUX_##f3, \
> + LPI_MUX_##f4, \
> + }, \
> + .nfuncs = 5, \
> + }
> +
> +struct lpi_pingroup {
> + struct group_desc group;
> + unsigned int pin;
> + /* Bit offset in slew register for SoundWire pins only */
> + int slew_offset;
> + unsigned int *funcs;
> + unsigned int nfuncs;
> +};
> +
> +struct lpi_function {
> + const char *name;
> + const char * const *groups;
> + unsigned int ngroups;
> +};
> +
> +struct lpi_pinctrl_variant_data {
> + const struct pinctrl_pin_desc *pins;
> + int npins;
> + const struct lpi_pingroup *groups;
> + int ngroups;
> + const struct lpi_function *functions;
> + int nfunctions;
> +};
> +
> +int lpi_pinctrl_probe(struct platform_device *pdev);
> +int lpi_pinctrl_remove(struct platform_device *pdev);
> +
> +#endif /*__PINCTRL_LPASS_LPI_H__*/
> diff --git a/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> new file mode 100644
> index 0000000..fb7dbb3
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-sm8250-lpass-lpi.c
> @@ -0,0 +1,165 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2020 Linaro Ltd.
> + */
> +
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include "pinctrl-lpass-lpi.h"
> +
> +enum lpass_lpi_functions {
> + LPI_MUX_dmic1_clk,
> + LPI_MUX_dmic1_data,
> + LPI_MUX_dmic2_clk,
> + LPI_MUX_dmic2_data,
> + LPI_MUX_dmic3_clk,
> + LPI_MUX_dmic3_data,
> + LPI_MUX_i2s1_clk,
> + LPI_MUX_i2s1_data,
> + LPI_MUX_i2s1_ws,
> + LPI_MUX_i2s2_clk,
> + LPI_MUX_i2s2_data,
> + LPI_MUX_i2s2_ws,
> + LPI_MUX_qua_mi2s_data,
> + LPI_MUX_qua_mi2s_sclk,
> + LPI_MUX_qua_mi2s_ws,
> + LPI_MUX_swr_rx_clk,
> + LPI_MUX_swr_rx_data,
> + LPI_MUX_swr_tx_clk,
> + LPI_MUX_swr_tx_data,
> + LPI_MUX_wsa_swr_clk,
> + LPI_MUX_wsa_swr_data,
> + LPI_MUX_gpio,
> + LPI_MUX__,
> +};
> +
> +static int gpio0_pins[] = { 0 };
> +static int gpio1_pins[] = { 1 };
> +static int gpio2_pins[] = { 2 };
> +static int gpio3_pins[] = { 3 };
> +static int gpio4_pins[] = { 4 };
> +static int gpio5_pins[] = { 5 };
> +static int gpio6_pins[] = { 6 };
> +static int gpio7_pins[] = { 7 };
> +static int gpio8_pins[] = { 8 };
> +static int gpio9_pins[] = { 9 };
> +static int gpio10_pins[] = { 10 };
> +static int gpio11_pins[] = { 11 };
> +static int gpio12_pins[] = { 12 };
> +static int gpio13_pins[] = { 13 };
> +
> +
> +/* sm8250 variant specific data */
> +static const struct pinctrl_pin_desc sm8250_lpi_pins[] = {
> + PINCTRL_PIN(0, "gpio0"),
> + PINCTRL_PIN(1, "gpio1"),
> + PINCTRL_PIN(2, "gpio2"),
> + PINCTRL_PIN(3, "gpio3"),
> + PINCTRL_PIN(4, "gpio4"),
> + PINCTRL_PIN(5, "gpio5"),
> + PINCTRL_PIN(6, "gpio6"),
> + PINCTRL_PIN(7, "gpio7"),
> + PINCTRL_PIN(8, "gpio8"),
> + PINCTRL_PIN(9, "gpio9"),
> + PINCTRL_PIN(10, "gpio10"),
> + PINCTRL_PIN(11, "gpio11"),
> + PINCTRL_PIN(12, "gpio12"),
> + PINCTRL_PIN(13, "gpio13"),
> +};
> +
> +static const char * const swr_tx_clk_groups[] = { "gpio0" };
> +static const char * const swr_tx_data_groups[] = { "gpio1", "gpio2", "gpio5" };
> +static const char * const swr_rx_clk_groups[] = { "gpio3" };
> +static const char * const swr_rx_data_groups[] = { "gpio4", "gpio5" };
> +static const char * const dmic1_clk_groups[] = { "gpio6" };
> +static const char * const dmic1_data_groups[] = { "gpio7" };
> +static const char * const dmic2_clk_groups[] = { "gpio8" };
> +static const char * const dmic2_data_groups[] = { "gpio9" };
> +static const char * const i2s2_clk_groups[] = { "gpio10" };
> +static const char * const i2s2_ws_groups[] = { "gpio11" };
> +static const char * const dmic3_clk_groups[] = { "gpio12" };
> +static const char * const dmic3_data_groups[] = { "gpio13" };
> +static const char * const qua_mi2s_sclk_groups[] = { "gpio0" };
> +static const char * const qua_mi2s_ws_groups[] = { "gpio1" };
> +static const char * const qua_mi2s_data_groups[] = { "gpio2", "gpio3", "gpio4" };
> +static const char * const i2s1_clk_groups[] = { "gpio6" };
> +static const char * const i2s1_ws_groups[] = { "gpio7" };
> +static const char * const i2s1_data_groups[] = { "gpio8", "gpio9" };
> +static const char * const wsa_swr_clk_groups[] = { "gpio10" };
> +static const char * const wsa_swr_data_groups[] = { "gpio11" };
> +static const char * const i2s2_data_groups[] = { "gpio12", "gpio12" };
> +
> +static const struct lpi_pingroup sm8250_groups[] = {
> + LPI_PINGROUP(0, 0, swr_tx_clk, qua_mi2s_sclk, _, _),
> + LPI_PINGROUP(1, 2, swr_tx_data, qua_mi2s_ws, _, _),
> + LPI_PINGROUP(2, 4, swr_tx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
> + LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
> + LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> + LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _, _),
> + LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
> + LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
> + LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
> + LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
> + LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> + LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
> + LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
> +};
> +
> +static const struct lpi_function sm8250_functions[] = {
> + LPI_FUNCTION(dmic1_clk),
> + LPI_FUNCTION(dmic1_data),
> + LPI_FUNCTION(dmic2_clk),
> + LPI_FUNCTION(dmic2_data),
> + LPI_FUNCTION(dmic3_clk),
> + LPI_FUNCTION(dmic3_data),
> + LPI_FUNCTION(i2s1_clk),
> + LPI_FUNCTION(i2s1_data),
> + LPI_FUNCTION(i2s1_ws),
> + LPI_FUNCTION(i2s2_clk),
> + LPI_FUNCTION(i2s2_data),
> + LPI_FUNCTION(i2s2_ws),
> + LPI_FUNCTION(qua_mi2s_data),
> + LPI_FUNCTION(qua_mi2s_sclk),
> + LPI_FUNCTION(qua_mi2s_ws),
> + LPI_FUNCTION(swr_rx_clk),
> + LPI_FUNCTION(swr_rx_data),
> + LPI_FUNCTION(swr_tx_clk),
> + LPI_FUNCTION(swr_tx_data),
> + LPI_FUNCTION(wsa_swr_clk),
> + LPI_FUNCTION(wsa_swr_data),
> +};
> +
> +static const struct lpi_pinctrl_variant_data sm8250_lpi_data = {
> + .pins = sm8250_lpi_pins,
> + .npins = ARRAY_SIZE(sm8250_lpi_pins),
> + .groups = sm8250_groups,
> + .ngroups = ARRAY_SIZE(sm8250_groups),
> + .functions = sm8250_functions,
> + .nfunctions = ARRAY_SIZE(sm8250_functions),
> +};
> +
> +static const struct of_device_id lpi_pinctrl_of_match[] = {
> + {
> + .compatible = "qcom,sm8250-lpass-lpi-pinctrl",
> + .data = &sm8250_lpi_data,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, lpi_pinctrl_of_match);
> +
> +static struct platform_driver lpi_pinctrl_driver = {
> + .driver = {
> + .name = "qcom-sm8250-lpass-lpi-pinctrl",
> + .of_match_table = lpi_pinctrl_of_match,
> + },
> + .probe = lpi_pinctrl_probe,
> + .remove = lpi_pinctrl_remove,
> +};
> +
> +module_platform_driver(lpi_pinctrl_driver);
> +MODULE_DESCRIPTION("QTI SM8250 LPI GPIO pin control driver");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
>
More information about the Alsa-devel
mailing list