[PATCH v2 5/6] ARM: dts: at91: sama7g5ek: add node for PDMC0
Codrin Ciubotariu
codrin.ciubotariu at microchip.com
Mon Mar 7 11:04:27 CET 2022
SAMA7G5-EK has 4 PDM microphones connected to PDMC0. PDMC0 pinmux is in
conflict with gmac1, gmac1 being enabled by default.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu at microchip.com>
---
Changes in v2:
- replaced included file dt-bindings/sound/mchp,pdmc.h wih
dt-bindings/sound/microchip,pdmc.h
arch/arm/boot/dts/at91-sama7g5ek.dts | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index ccf9e224da78..a1fb980d3fc1 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -14,6 +14,7 @@
#include <dt-bindings/mfd/atmel-flexcom.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
/ {
model = "Microchip SAMA7G5-EK";
@@ -439,7 +440,7 @@ &gmac1 {
&pinctrl_gmac1_mdio_default
&pinctrl_gmac1_phy_irq>;
phy-mode = "rmii";
- status = "okay";
+ status = "okay"; /* Conflict with pdmc0. */
ethernet-phy at 0 {
reg = <0x0>;
@@ -453,6 +454,17 @@ &i2s0 {
pinctrl-0 = <&pinctrl_i2s0_default>;
};
+&pdmc0 {
+ #sound-dai-cells = <0>;
+ microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+ <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+ <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+ <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+ status = "disabled"; /* Conflict with gmac1. */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
&pioA {
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PE3__FLEXCOM0_IO0>,
@@ -609,6 +621,13 @@ pinctrl_mikrobus1_spi: mikrobus1_spi {
bias-disable;
};
+ pinctrl_pdmc0_default: pdmc0_default {
+ pinmux = <PIN_PD23__PDMC0_DS0>,
+ <PIN_PD24__PDMC0_DS1>,
+ <PIN_PD22__PDMC0_CLK>;
+ bias_disable;
+ };
+
pinctrl_qspi: qspi {
pinmux = <PIN_PB12__QSPI0_IO0>,
<PIN_PB11__QSPI0_IO1>,
--
2.32.0
More information about the Alsa-devel
mailing list