[PATCH 20/20] Documentation: devicetree: CS35l41 External Boost

[Lucas Tanure]

From: David Rhodes <drhodes at opensource.cirrus.com>

Document external boost feature on CS35L41

Signed-off-by: David Rhodes <drhodes at opensource.cirrus.com>
---
 .../bindings/sound/cirrus,cs35l41.yaml        | 42 +++++++++++++++++--
 1 file changed, 39 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
index 3235702ce402..51b5d86661d5 100644
--- a/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
+++ b/Documentation/devicetree/bindings/sound/cirrus,cs35l41.yaml
@@ -75,6 +75,19 @@ properties:
     maximum: 3
     default: 2
 
+  cirrus,boost-type:
+    description:
+      Configures the type of Boost being used.
+      Internal boost requires boost-peak-milliamp, boost-ind-nanohenry and
+      boost-cap-microfarad.
+      External Boost must have GPIO1 as GPIO output. GPIO1 will be set high to
+      enable boost voltage.
+      0 = Internal Boost
+      1 = External Boost
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    minimum: 0
+    maximum: 1
+
   cirrus,gpio1-polarity-invert:
     description:
       Boolean which specifies whether the GPIO1
@@ -131,9 +144,32 @@ required:
   - compatible
   - reg
   - "#sound-dai-cells"
-  - cirrus,boost-peak-milliamp
-  - cirrus,boost-ind-nanohenry
-  - cirrus,boost-cap-microfarad
+
+allOf:
+  - if:
+      properties:
+        cirrus,boost-type:
+          contains:
+            const: 0
+
+    then:
+      required:
+        - cirrus,boost-peak-milliamp
+        - cirrus,boost-ind-nanohenry
+        - cirrus,boost-cap-microfarad
+
+  - if:
+      properties:
+        cirrus,boost-type:
+          contains:
+            const: 1
+
+    then:
+      required:
+        - cirrus,gpio1-output-enable
+      properties:
+        cirrus,gpio1-src-select:
+          const: 1
 
 additionalProperties: false
 
-- 
2.35.1