[PATCH] ASoC: soc-generic-dmaengine-pcm: set period_bytes_min based on maxburst

[Sascha Hauer]

In dmaengine_pcm_set_runtime_hwparams() period_bytes_min is hardcoded to
256. For some applications that may be too big. This patch changes that
to calculate the value based on dma_data->maxburst. The correct value
would be maxburst multiplied by the address width of the hardware FIFO.
Unfortunately the address width is dynamically calculated based on the
stream parameters and is not known at open time, so the worst case
is chosen here which is 8 bytes, the maximum that is supported by
dmaengine drivers.
Not all drivers may set a maxburst value, so we fall back to the
previously used hardcoded value of 256 bytes.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 sound/soc/soc-generic-dmaengine-pcm.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 99253de29a74e..734d46b9783f7 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -122,7 +122,9 @@ dmaengine_pcm_set_runtime_hwparams(struct snd_soc_component *component,
 			SNDRV_PCM_INFO_INTERLEAVED;
 	hw.periods_min = 2;
 	hw.periods_max = UINT_MAX;
-	hw.period_bytes_min = 256;
+	hw.period_bytes_min = dma_data->maxburst * DMA_SLAVE_BUSWIDTH_8_BYTES;
+	if (!hw.period_bytes_min)
+		hw.period_bytes_min = 256;
 	hw.period_bytes_max = dma_get_max_seg_size(dma_dev);
 	hw.buffer_bytes_max = SIZE_MAX;
 	hw.fifo_size = dma_data->fifo_size;
-- 
2.30.2