[PATCH v3 00/15] Canaan devicetree fixes

[Sudeep Holla]

On Thu, Jun 30, 2022 at 04:28:26PM +0000, Niklas Cassel wrote:
> On Wed, Jun 29, 2022 at 07:43:29PM +0100, Conor Dooley wrote:
> > From: Conor Dooley <conor.dooley at microchip.com>
> > 
> > Hey all,
> > This series should rid us of dtbs_check errors for the RISC-V Canaan k210
> > based boards. To make keeping it that way a little easier, I changed the
> > Canaan devicetree Makefile so that it would build all of the devicetrees
> > in the directory if SOC_CANAAN.
> > 
> > I *DO NOT* have any Canaan hardware so I have not tested any of this in
> > action. Since I sent v1, I tried to buy some since it's cheap - but could
> > out of the limited stockists none seemed to want to deliver to Ireland :(
> > I based the series on next-20220617.
> > 
> 
> I first tried to apply your series on top of next-20220630,
> but was greeted by a bunch of different warnings on boot,
> including endless RCU stall warnings.
> However, even when booting next-20220630 without your patches,
> I got the same warnings and RCU stall.
>

Is it possible to share the boot logs please ?
Conor is having issues with my arch_topology/cacheinfo updates in -next.
I would like to know if your issue is related to that or not ?

> So I tested your series on top of v5.19-rc4 +
> commit 0397d50f4cad ("spi: dt-bindings: Move 'rx-sample-delay-ns' to
> spi-peripheral-props.yaml") cherry-picked,
> (in order to avoid conflicts when applying your series,)
> and the board was working as intended, no warnings or RCU stalls.
>

If possible can you give this branch[1] a try where my changes are and doesn't
have any other changes from -next. Sorry to bother you.

Conor seem to have issue with this commit[2], so if you get issues try to
check if [3] works.

Regards,
Sudeep

[1] https://git.kernel.org/sudeep.holla/c/ae85abf284e7
[2] https://git.kernel.org/sudeep.holla/c/155bd845d17b
[3] https://git.kernel.org/sudeep.holla/c/009297d29faa