[PATCH 8/8] ASoC: max98396: Fix TDM mode BSEL settings
Daniel Mack
daniel at zonque.org
Fri Jun 24 12:47:12 CEST 2022
In TDM mode, the BSEL register value must be set according to table 5 in the
datasheet. This patch adds a lookup function and uses it in
max98396_dai_tdm_slot().
As the first 3 entries can also be used for non-TDM setups, the code now
re-uses the same code for such scenarios.
max98396_set_clock() is folded into its only user for clarity.
Signed-off-by: Daniel Mack <daniel at zonque.org>
---
sound/soc/codecs/max98396.c | 124 +++++++++++++++++++++++-------------
1 file changed, 81 insertions(+), 43 deletions(-)
diff --git a/sound/soc/codecs/max98396.c b/sound/soc/codecs/max98396.c
index f28831f4e74b..f1657a5f2140 100644
--- a/sound/soc/codecs/max98396.c
+++ b/sound/soc/codecs/max98396.c
@@ -438,47 +438,55 @@ static int max98396_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
return 0;
}
-/* BCLKs per LRCLK */
-static const int bclk_sel_table[] = {
- 32, 48, 64, 96, 128, 192, 256, 384, 512, 320,
+/* Refer to table 5 in the datasheet */
+static const struct max98396_pcm_config {
+ int in, out, width, bsel, max_sr;
+} max98396_pcm_configs[] = {
+ { .in = 2, .out = 4, .width = 16, .bsel = 0x2, /* 32 */ .max_sr = 192000 },
+ { .in = 2, .out = 6, .width = 24, .bsel = 0x3, /* 48 */ .max_sr = 192000 },
+ { .in = 2, .out = 8, .width = 32, .bsel = 0x4, /* 64 */ .max_sr = 192000 },
+ { .in = 3, .out = 15, .width = 32, .bsel = 0xd, /* 125 */ .max_sr = 192000 },
+ { .in = 4, .out = 8, .width = 16, .bsel = 0x4, /* 64 */ .max_sr = 192000 },
+ { .in = 4, .out = 12, .width = 24, .bsel = 0x5, /* 96 */ .max_sr = 192000 },
+ { .in = 4, .out = 16, .width = 32, .bsel = 0x6, /* 128 */ .max_sr = 192000 },
+ { .in = 5, .out = 15, .width = 24, .bsel = 0xd, /* 125 */ .max_sr = 192000 },
+ { .in = 7, .out = 15, .width = 16, .bsel = 0xd, /* 125 */ .max_sr = 192000 },
+ { .in = 2, .out = 4, .width = 16, .bsel = 0x2, /* 32 */ .max_sr = 96000 },
+ { .in = 2, .out = 6, .width = 24, .bsel = 0x3, /* 48 */ .max_sr = 96000 },
+ { .in = 2, .out = 8, .width = 32, .bsel = 0x4, /* 64 */ .max_sr = 96000 },
+ { .in = 3, .out = 15, .width = 32, .bsel = 0xd, /* 125 */ .max_sr = 96000 },
+ { .in = 4, .out = 8, .width = 16, .bsel = 0x4, /* 64 */ .max_sr = 96000 },
+ { .in = 4, .out = 12, .width = 24, .bsel = 0x5, /* 96 */ .max_sr = 96000 },
+ { .in = 4, .out = 16, .width = 32, .bsel = 0x6, /* 128 */ .max_sr = 96000 },
+ { .in = 5, .out = 15, .width = 24, .bsel = 0xd, /* 125 */ .max_sr = 96000 },
+ { .in = 7, .out = 15, .width = 16, .bsel = 0xd, /* 125 */ .max_sr = 96000 },
+ { .in = 7, .out = 31, .width = 32, .bsel = 0xc, /* 250 */ .max_sr = 96000 },
+ { .in = 8, .out = 16, .width = 16, .bsel = 0x6, /* 128 */ .max_sr = 96000 },
+ { .in = 8, .out = 24, .width = 24, .bsel = 0x7, /* 192 */ .max_sr = 96000 },
+ { .in = 8, .out = 32, .width = 32, .bsel = 0x8, /* 256 */ .max_sr = 96000 },
+ { .in = 10, .out = 31, .width = 24, .bsel = 0xc, /* 250 */ .max_sr = 96000 },
+ { .in = 15, .out = 31, .width = 16, .bsel = 0xc, /* 250 */ .max_sr = 96000 },
+ { .in = 16, .out = 32, .width = 16, .bsel = 0x8, /* 256 */ .max_sr = 96000 },
+ { .in = 7, .out = 31, .width = 32, .bsel = 0xc, /* 250 */ .max_sr = 48000 },
+ { .in = 10, .out = 31, .width = 24, .bsel = 0xc, /* 250 */ .max_sr = 48000 },
+ { .in = 10, .out = 40, .width = 32, .bsel = 0xb, /* 320 */ .max_sr = 48000 },
+ { .in = 15, .out = 31, .width = 16, .bsel = 0xc, /* 250 */ .max_sr = 48000 },
+ { .in = 16, .out = 48, .width = 24, .bsel = 0x9, /* 384 */ .max_sr = 48000 },
+ { .in = 16, .out = 64, .width = 32, .bsel = 0xa, /* 512 */ .max_sr = 48000 },
};
-static int max98396_get_bclk_sel(int bclk)
+static int max98396_pcm_config_index(int in_slots, int out_slots, int width)
{
int i;
- /* match BCLKs per LRCLK */
- for (i = 0; i < ARRAY_SIZE(bclk_sel_table); i++) {
- if (bclk_sel_table[i] == bclk)
- return i + 2;
- }
- return 0;
-}
-static int max98396_set_clock(struct snd_soc_component *component,
- struct snd_pcm_hw_params *params)
-{
- struct max98396_priv *max98396 = snd_soc_component_get_drvdata(component);
- /* BCLK/LRCLK ratio calculation */
- int blr_clk_ratio = params_channels(params) * max98396->ch_size;
- int value;
-
- if (!max98396->tdm_mode) {
- /* BCLK configuration */
- value = max98396_get_bclk_sel(blr_clk_ratio);
- if (!value) {
- dev_err(component->dev,
- "blr_clk_ratio %d unsupported, format %d\n",
- blr_clk_ratio, params_format(params));
- return -EINVAL;
- }
+ for (i = 0; i < ARRAY_SIZE(max98396_pcm_configs); i++) {
+ const struct max98396_pcm_config *c = &max98396_pcm_configs[i];
- regmap_update_bits(max98396->regmap,
- MAX98396_R2042_PCM_CLK_SETUP,
- MAX98396_PCM_CLK_SETUP_BSEL_MASK,
- value);
+ if (in_slots == c->in && out_slots <= c->out && width == c->width)
+ return i;
}
- return 0;
+ return -1;
}
static int max98396_dai_hw_params(struct snd_pcm_substream *substream,
@@ -489,8 +497,7 @@ static int max98396_dai_hw_params(struct snd_pcm_substream *substream,
struct max98396_priv *max98396 = snd_soc_component_get_drvdata(component);
unsigned int sampling_rate = 0;
unsigned int chan_sz = 0;
- int ret, reg;
- int status;
+ int ret, reg, status, bsel;
bool update = false;
/* pcm mode configuration */
@@ -510,8 +517,6 @@ static int max98396_dai_hw_params(struct snd_pcm_substream *substream,
goto err;
}
- max98396->ch_size = snd_pcm_format_width(params_format(params));
-
dev_dbg(component->dev, "format supported %d",
params_format(params));
@@ -559,6 +564,33 @@ static int max98396_dai_hw_params(struct snd_pcm_substream *substream,
goto err;
}
+ if (max98396->tdm_mode) {
+ if (params_rate(params) > max98396->tdm_max_samplerate) {
+ dev_err(component->dev, "TDM sample rate %d too high",
+ params_rate(params));
+ goto err;
+ }
+ } else {
+ /* BCLK configuration */
+ ret = max98396_pcm_config_index(params_channels(params),
+ params_channels(params),
+ snd_pcm_format_width(params_format(params)));
+ if (ret < 0) {
+ dev_err(component->dev,
+ "no PCM config for %d channels, format %d\n",
+ params_channels(params), params_format(params));
+ goto err;
+ }
+
+ bsel = max98396_pcm_configs[ret].bsel;
+
+ if (params_rate(params) > max98396_pcm_configs[ret].max_sr) {
+ dev_err(component->dev, "sample rate %d too high",
+ params_rate(params));
+ goto err;
+ }
+ }
+
ret = regmap_read(max98396->regmap, MAX98396_R210F_GLOBAL_EN, &status);
if (ret < 0)
goto err;
@@ -604,12 +636,15 @@ static int max98396_dai_hw_params(struct snd_pcm_substream *substream,
MAX98396_IVADC_SR_MASK,
sampling_rate << MAX98396_IVADC_SR_SHIFT);
- ret = max98396_set_clock(component, params);
+ regmap_update_bits(max98396->regmap,
+ MAX98396_R2042_PCM_CLK_SETUP,
+ MAX98396_PCM_CLK_SETUP_BSEL_MASK,
+ bsel);
if (status && update)
max98396_global_enable_onoff(max98396->regmap, true);
- return ret;
+ return 0;
err:
return -EINVAL;
@@ -634,13 +669,16 @@ static int max98396_dai_tdm_slot(struct snd_soc_dai *dai,
max98396->tdm_mode = true;
/* BCLK configuration */
- bsel = max98396_get_bclk_sel(slots * slot_width);
- if (bsel == 0) {
- dev_err(component->dev, "BCLK %d not supported\n",
- slots * slot_width);
+ ret = max98396_pcm_config_index(slots, slots, slot_width);
+ if (ret < 0) {
+ dev_err(component->dev, "no TDM config for %d slots %d bits\n",
+ slots, slot_width);
return -EINVAL;
}
+ bsel = max98396_pcm_configs[ret].bsel;
+ max98396->tdm_max_samplerate = max98396_pcm_configs[ret].max_sr;
+
/* Channel size configuration */
switch (slot_width) {
case 16:
--
2.36.1
More information about the Alsa-devel
mailing list