[PATCH v4 1/2] soundwire: qcom: Add flag for software clock gating check

Srinivasa Rao Mandadapu quic_srivasam at quicinc.com
Fri Jun 10 12:04:39 CEST 2022


On 6/9/2022 8:52 PM, Pierre-Louis Bossart wrote:
Thanks for your time Pierre-Louis!!!
>
> On 6/9/22 09:30, Srinivasa Rao Mandadapu wrote:
>> Validate software clock gating required or not and do software
>> clock gating on hclk if soundwire is operational and keep it
>> running by adding flag in private data structure.
>> This is to avoid conflict between older architectures,
>> where software clock gating is not required and on latest
>> architectues, where software clock gating is mandatory.
> architectures.
Okay. Will fix it.
>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam at quicinc.com>
>> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
>> ---
>>   drivers/soundwire/qcom.c | 14 ++++++++++----
>>   1 file changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
>> index a3fccf0..8e163da 100644
>> --- a/drivers/soundwire/qcom.c
>> +++ b/drivers/soundwire/qcom.c
>> @@ -181,6 +181,7 @@ struct qcom_swrm_ctrl {
>>   struct qcom_swrm_data {
>>   	u32 default_cols;
>>   	u32 default_rows;
>> +	bool sw_clk_gate_required;
>>   };
>>   
>>   static const struct qcom_swrm_data swrm_v1_3_data = {
>> @@ -1311,6 +1312,15 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>>   			return PTR_ERR(ctrl->mmio);
>>   	}
>>   
>> +	if (data->sw_clk_gate_required) {
>> +		ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
>> +		if (IS_ERR(ctrl->audio_cgcr)) {
> You need to handle the NULL case, devm_reset_control_get_exclusive() can
> return ERR_OR_NULL
>
> https://elixir.bootlin.com/linux/latest/source/drivers/reset/core.c#L1045
Okay. Will change accordingly.
>
>> +			dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n");
>> +			ret = PTR_ERR(ctrl->audio_cgcr);
>> +			goto err_init;
>> +		}
>> +	}
>> +
>>   	ctrl->irq = of_irq_get(dev->of_node, 0);
>>   	if (ctrl->irq < 0) {
>>   		ret = ctrl->irq;
>> @@ -1336,10 +1346,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>>   	ctrl->bus.compute_params = &qcom_swrm_compute_params;
>>   	ctrl->bus.clk_stop_timeout = 300;
>>   
>> -	ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
>> -	if (IS_ERR(ctrl->audio_cgcr))
>> -		dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
>> -
>>   	ret = qcom_swrm_get_port_config(ctrl);
>>   	if (ret)
>>   		goto err_clk;


More information about the Alsa-devel mailing list