[PATCH v2 2/2] ASoC: qcom: soundwire: Add software clock gating requirement check

Srinivas Kandagatla srinivas.kandagatla at linaro.org
Wed Jun 8 13:04:13 CEST 2022



On 08/06/2022 06:57, Srinivasa Rao Mandadapu wrote:
> Validate software clock gating required or not and do software
> clock gating on hclk if soundwire is operational and keep it
> running by adding flag in private dat structure.
> This is to avoid conflict between older architectures,
> where software clock gating is not required and on latest
> architectues, where software clock gating is mandatory.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam at quicinc.com>
> ---
>   drivers/soundwire/qcom.c | 27 ++++++++++++++++++++-------
>   1 file changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
> index 38c3bf5..930aa93 100644
> --- a/drivers/soundwire/qcom.c
> +++ b/drivers/soundwire/qcom.c
> @@ -194,6 +194,12 @@ static const struct qcom_swrm_data swrm_v1_5_data = {
>   	.default_cols = 16,
>   };
>   
> +static const struct qcom_swrm_data swrm_v1_6_data = {
> +	.default_rows = 50,
> +	.default_cols = 16,
> +	.sw_clk_gate_required = 1,

.sw_clk_gate_required = true,

instead of 1 and 0

Once fixed,

Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>

--srini



> +};
> +
>   #define to_qcom_sdw(b)	container_of(b, struct qcom_swrm_ctrl, bus)
>   
>   static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg,
> @@ -659,7 +665,8 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl)
>   	val = FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_ROW_CTRL_BMSK, ctrl->rows_index);
>   	val |= FIELD_PREP(SWRM_MCP_FRAME_CTRL_BANK_COL_CTRL_BMSK, ctrl->cols_index);
>   
> -	reset_control_reset(ctrl->audio_cgcr);
> +	if (ctrl->audio_cgcr)
> +		reset_control_reset(ctrl->audio_cgcr);
>   
>   	ctrl->reg_write(ctrl, SWRM_MCP_FRAME_CTRL_BANK_ADDR(0), val);
>   
> @@ -1312,6 +1319,15 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>   			return PTR_ERR(ctrl->mmio);
>   	}
>   
> +	if (data->sw_clk_gate_required) {
> +		ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
> +		if (IS_ERR(ctrl->audio_cgcr)) {
> +			dev_err(dev, "Failed to get cgcr reset ctrl required for SW gating\n");
> +			ret = PTR_ERR(ctrl->audio_cgcr);
> +			goto err_init;
> +		}
> +	}
> +
>   	ctrl->irq = of_irq_get(dev->of_node, 0);
>   	if (ctrl->irq < 0) {
>   		ret = ctrl->irq;
> @@ -1337,10 +1353,6 @@ static int qcom_swrm_probe(struct platform_device *pdev)
>   	ctrl->bus.compute_params = &qcom_swrm_compute_params;
>   	ctrl->bus.clk_stop_timeout = 300;
>   
> -	ctrl->audio_cgcr = devm_reset_control_get_exclusive(dev, "swr_audio_cgcr");
> -	if (IS_ERR(ctrl->audio_cgcr))
> -		dev_err(dev, "Failed to get audio_cgcr reset required for soundwire-v1.6.0\n");
> -
>   	ret = qcom_swrm_get_port_config(ctrl);
>   	if (ret)
>   		goto err_clk;
> @@ -1494,7 +1506,8 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev)
>   		qcom_swrm_get_device_status(ctrl);
>   		sdw_handle_slave_status(&ctrl->bus, ctrl->status);
>   	} else {
> -		reset_control_reset(ctrl->audio_cgcr);
> +		if (ctrl->audio_cgcr)
> +			reset_control_reset(ctrl->audio_cgcr);
>   
>   		ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START);
>   		ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR,
> @@ -1559,7 +1572,7 @@ static const struct dev_pm_ops swrm_dev_pm_ops = {
>   static const struct of_device_id qcom_swrm_of_match[] = {
>   	{ .compatible = "qcom,soundwire-v1.3.0", .data = &swrm_v1_3_data },
>   	{ .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data },
> -	{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_5_data },
> +	{ .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data },
>   	{/* sentinel */},
>   };
>   


More information about the Alsa-devel mailing list