[PATCH 2/3] ASoC: SOF: Intel: hda-loader: Use the FSR state definitions during bootup

[Peter Ujfalusi]

Switch to use the newly added FSR (Firmware State Register) definitions
for DSP state handling and targeting.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi at linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
Reviewed-by: Rander Wang <rander.wang at intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan at linux.intel.com>
---
 sound/soc/sof/intel/hda-loader.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/sound/soc/sof/intel/hda-loader.c b/sound/soc/sof/intel/hda-loader.c
index 819b3b08c655..304fa3923f1a 100644
--- a/sound/soc/sof/intel/hda-loader.c
+++ b/sound/soc/sof/intel/hda-loader.c
@@ -177,14 +177,13 @@ int cl_dsp_init(struct snd_sof_dev *sdev, int stream_tag, bool imr_boot)
 	 * - IMR boot: wait for ROM firmware entered (firmware booted up from IMR)
 	 */
 	if (imr_boot)
-		target_status = HDA_DSP_ROM_FW_ENTERED;
+		target_status = FSR_STATE_FW_ENTERED;
 	else
-		target_status = HDA_DSP_ROM_INIT;
+		target_status = FSR_STATE_INIT_DONE;
 
 	ret = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
 					chip->rom_status_reg, status,
-					((status & HDA_DSP_ROM_STS_MASK)
-						== target_status),
+					(FSR_TO_STATE_CODE(status) == target_status),
 					HDA_DSP_REG_POLL_INTERVAL_US,
 					chip->rom_init_timeout *
 					USEC_PER_MSEC);
@@ -292,8 +291,7 @@ int hda_cl_copy_fw(struct snd_sof_dev *sdev, struct hdac_ext_stream *hext_stream
 
 	status = snd_sof_dsp_read_poll_timeout(sdev, HDA_DSP_BAR,
 					chip->rom_status_reg, reg,
-					((reg & HDA_DSP_ROM_STS_MASK)
-						== HDA_DSP_ROM_FW_ENTERED),
+					(FSR_TO_STATE_CODE(reg) == FSR_STATE_FW_ENTERED),
 					HDA_DSP_REG_POLL_INTERVAL_US,
 					HDA_DSP_BASEFW_TIMEOUT_US);
 
-- 
2.37.0