[PATCH 1/2] ASoC: rt5640: Fix the wrong state of JD1 and JD2
Oder Chiou
oder_chiou at realtek.com
Tue Jul 5 12:11:33 CEST 2022
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou at realtek.com>
Reported-by: Sameer Pujar <spujar at nvidia.com>
---
sound/soc/codecs/rt5640.c | 30 ++++++++++++++++++++++--------
1 file changed, 22 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c
index 56008e4518f3..19bdb6d0f5a9 100644
--- a/sound/soc/codecs/rt5640.c
+++ b/sound/soc/codecs/rt5640.c
@@ -1984,7 +1984,12 @@ static int rt5640_set_bias_level(struct snd_soc_component *component,
snd_soc_component_write(component, RT5640_PWR_DIG2, 0x0000);
snd_soc_component_write(component, RT5640_PWR_VOL, 0x0000);
snd_soc_component_write(component, RT5640_PWR_MIXER, 0x0000);
- snd_soc_component_write(component, RT5640_PWR_ANLG1, 0x0000);
+ if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER)
+ snd_soc_component_write(component, RT5640_PWR_ANLG1,
+ 0x0018);
+ else
+ snd_soc_component_write(component, RT5640_PWR_ANLG1,
+ 0x0000);
snd_soc_component_write(component, RT5640_PWR_ANLG2, 0x0000);
break;
@@ -2393,9 +2398,15 @@ static void rt5640_jack_work(struct work_struct *work)
static irqreturn_t rt5640_irq(int irq, void *data)
{
struct rt5640_priv *rt5640 = data;
+ int delay = 0;
+
+ if (rt5640->jd_src == RT5640_JD_SRC_HDA_HEADER) {
+ cancel_delayed_work_sync(&rt5640->jack_work);
+ delay = 100;
+ }
if (rt5640->jack)
- queue_delayed_work(system_long_wq, &rt5640->jack_work, 0);
+ queue_delayed_work(system_long_wq, &rt5640->jack_work, delay);
return IRQ_HANDLED;
}
@@ -2580,6 +2591,12 @@ static void rt5640_enable_hda_jack_detect(
snd_soc_component_update_bits(component, RT5640_DUMMY1, 0x400, 0x0);
+ snd_soc_component_update_bits(component, RT5640_PWR_ANLG1,
+ RT5640_PWR_VREF2, RT5640_PWR_VREF2);
+ usleep_range(10000, 15000);
+ snd_soc_component_update_bits(component, RT5640_PWR_ANLG1,
+ RT5640_PWR_FV2, RT5640_PWR_FV2);
+
rt5640->jack = jack;
ret = request_irq(rt5640->irq, rt5640_irq,
@@ -2696,16 +2713,13 @@ static int rt5640_probe(struct snd_soc_component *component)
if (device_property_read_u32(component->dev,
"realtek,jack-detect-source", &val) == 0) {
- if (val <= RT5640_JD_SRC_GPIO4) {
+ if (val <= RT5640_JD_SRC_GPIO4)
rt5640->jd_src = val << RT5640_JD_SFT;
- } else if (val == RT5640_JD_SRC_HDA_HEADER) {
+ else if (val == RT5640_JD_SRC_HDA_HEADER)
rt5640->jd_src = RT5640_JD_SRC_HDA_HEADER;
- snd_soc_component_update_bits(component, RT5640_DUMMY1,
- 0x0300, 0x0);
- } else {
+ else
dev_warn(component->dev, "Warning: Invalid jack-detect-source value: %d, leaving jack-detect disabled\n",
val);
- }
}
if (!device_property_read_bool(component->dev, "realtek,jack-detect-not-inverted"))
--
2.37.0
More information about the Alsa-devel
mailing list