[PATCH v2 3/6] ASoC: xilinx: xlnx_i2s: create drvdata structure
Robert Hancock
robert.hancock at calian.com
Fri Jan 7 22:47:08 CET 2022
An upcoming change will require storing additional driver data other
than the memory base address. Create a drvdata structure and use that
rather than storing the raw base address pointer.
Signed-off-by: Robert Hancock <robert.hancock at calian.com>
---
sound/soc/xilinx/xlnx_i2s.c | 66 ++++++++++++++++++++-----------------
1 file changed, 35 insertions(+), 31 deletions(-)
diff --git a/sound/soc/xilinx/xlnx_i2s.c b/sound/soc/xilinx/xlnx_i2s.c
index cc641e582c82..3bafa34b789a 100644
--- a/sound/soc/xilinx/xlnx_i2s.c
+++ b/sound/soc/xilinx/xlnx_i2s.c
@@ -22,15 +22,20 @@
#define I2S_CH0_OFFSET 0x30
#define I2S_I2STIM_VALID_MASK GENMASK(7, 0)
+struct xlnx_i2s_drv_data {
+ struct snd_soc_dai_driver dai_drv;
+ void __iomem *base;
+};
+
static int xlnx_i2s_set_sclkout_div(struct snd_soc_dai *cpu_dai,
int div_id, int div)
{
- void __iomem *base = snd_soc_dai_get_drvdata(cpu_dai);
+ struct xlnx_i2s_drv_data *drv_data = snd_soc_dai_get_drvdata(cpu_dai);
if (!div || (div & ~I2S_I2STIM_VALID_MASK))
return -EINVAL;
- writel(div, base + I2S_I2STIM_OFFSET);
+ writel(div, drv_data->base + I2S_I2STIM_OFFSET);
return 0;
}
@@ -40,13 +45,13 @@ static int xlnx_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *i2s_dai)
{
u32 reg_off, chan_id;
- void __iomem *base = snd_soc_dai_get_drvdata(i2s_dai);
+ struct xlnx_i2s_drv_data *drv_data = snd_soc_dai_get_drvdata(i2s_dai);
chan_id = params_channels(params) / 2;
while (chan_id > 0) {
reg_off = I2S_CH0_OFFSET + ((chan_id - 1) * 4);
- writel(chan_id, base + reg_off);
+ writel(chan_id, drv_data->base + reg_off);
chan_id--;
}
@@ -56,18 +61,18 @@ static int xlnx_i2s_hw_params(struct snd_pcm_substream *substream,
static int xlnx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *i2s_dai)
{
- void __iomem *base = snd_soc_dai_get_drvdata(i2s_dai);
+ struct xlnx_i2s_drv_data *drv_data = snd_soc_dai_get_drvdata(i2s_dai);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- writel(1, base + I2S_CORE_CTRL_OFFSET);
+ writel(1, drv_data->base + I2S_CORE_CTRL_OFFSET);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- writel(0, base + I2S_CORE_CTRL_OFFSET);
+ writel(0, drv_data->base + I2S_CORE_CTRL_OFFSET);
break;
default:
return -EINVAL;
@@ -95,20 +100,19 @@ MODULE_DEVICE_TABLE(of, xlnx_i2s_of_match);
static int xlnx_i2s_probe(struct platform_device *pdev)
{
- void __iomem *base;
- struct snd_soc_dai_driver *dai_drv;
+ struct xlnx_i2s_drv_data *drv_data;
int ret;
u32 ch, format, data_width;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
- dai_drv = devm_kzalloc(&pdev->dev, sizeof(*dai_drv), GFP_KERNEL);
- if (!dai_drv)
+ drv_data = devm_kzalloc(&pdev->dev, sizeof(*drv_data), GFP_KERNEL);
+ if (!drv_data)
return -ENOMEM;
- base = devm_platform_ioremap_resource(pdev, 0);
- if (IS_ERR(base))
- return PTR_ERR(base);
+ drv_data->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(drv_data->base))
+ return PTR_ERR(drv_data->base);
ret = of_property_read_u32(node, "xlnx,num-channels", &ch);
if (ret < 0) {
@@ -134,35 +138,35 @@ static int xlnx_i2s_probe(struct platform_device *pdev)
}
if (of_device_is_compatible(node, "xlnx,i2s-transmitter-1.0")) {
- dai_drv->name = "xlnx_i2s_playback";
- dai_drv->playback.stream_name = "Playback";
- dai_drv->playback.formats = format;
- dai_drv->playback.channels_min = ch;
- dai_drv->playback.channels_max = ch;
- dai_drv->playback.rates = SNDRV_PCM_RATE_8000_192000;
- dai_drv->ops = &xlnx_i2s_dai_ops;
+ drv_data->dai_drv.name = "xlnx_i2s_playback";
+ drv_data->dai_drv.playback.stream_name = "Playback";
+ drv_data->dai_drv.playback.formats = format;
+ drv_data->dai_drv.playback.channels_min = ch;
+ drv_data->dai_drv.playback.channels_max = ch;
+ drv_data->dai_drv.playback.rates = SNDRV_PCM_RATE_8000_192000;
+ drv_data->dai_drv.ops = &xlnx_i2s_dai_ops;
} else if (of_device_is_compatible(node, "xlnx,i2s-receiver-1.0")) {
- dai_drv->name = "xlnx_i2s_capture";
- dai_drv->capture.stream_name = "Capture";
- dai_drv->capture.formats = format;
- dai_drv->capture.channels_min = ch;
- dai_drv->capture.channels_max = ch;
- dai_drv->capture.rates = SNDRV_PCM_RATE_8000_192000;
- dai_drv->ops = &xlnx_i2s_dai_ops;
+ drv_data->dai_drv.name = "xlnx_i2s_capture";
+ drv_data->dai_drv.capture.stream_name = "Capture";
+ drv_data->dai_drv.capture.formats = format;
+ drv_data->dai_drv.capture.channels_min = ch;
+ drv_data->dai_drv.capture.channels_max = ch;
+ drv_data->dai_drv.capture.rates = SNDRV_PCM_RATE_8000_192000;
+ drv_data->dai_drv.ops = &xlnx_i2s_dai_ops;
} else {
return -ENODEV;
}
- dev_set_drvdata(&pdev->dev, base);
+ dev_set_drvdata(&pdev->dev, drv_data);
ret = devm_snd_soc_register_component(&pdev->dev, &xlnx_i2s_component,
- dai_drv, 1);
+ &drv_data->dai_drv, 1);
if (ret) {
dev_err(&pdev->dev, "i2s component registration failed\n");
return ret;
}
- dev_info(&pdev->dev, "%s DAI registered\n", dai_drv->name);
+ dev_info(&pdev->dev, "%s DAI registered\n", drv_data->dai_drv.name);
return ret;
}
--
2.31.1
More information about the Alsa-devel
mailing list