[PATCH 3/3] ASoC: sun4i-i2s: Add support for the R329/D1 variant
Samuel Holland
samuel at sholland.org
Thu Feb 3 03:01:15 CET 2022
This adds a new set of quirks to set the right RX channel map. Since
that is the only change to the register layout, reuse the H6 regmap
config by extending its last register. R329 support is added by its
compatible string. D1 uses R329 as its fallback compatible, so no
additional code change is needed for it.
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
sound/soc/sunxi/sun4i-i2s.c | 40 ++++++++++++++++++++++++++++++++++---
1 file changed, 37 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
index 7da8a16955a1..7047f71629ab 100644
--- a/sound/soc/sunxi/sun4i-i2s.c
+++ b/sound/soc/sunxi/sun4i-i2s.c
@@ -181,6 +181,9 @@ struct sun4i_i2s_quirks {
struct reg_field field_fmt_wss;
struct reg_field field_fmt_sr;
+ unsigned int num_din_pins;
+ unsigned int num_dout_pins;
+
const struct sun4i_i2s_clk_div *bclk_dividers;
unsigned int num_bclk_dividers;
const struct sun4i_i2s_clk_div *mclk_dividers;
@@ -531,8 +534,15 @@ static int sun50i_h6_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
/* Map the channels for playback and capture */
regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP0_REG(0), 0xFEDCBA98);
regmap_write(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_MAP1_REG(0), 0x76543210);
- regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0xFEDCBA98);
- regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
+ if (i2s->variant->num_din_pins > 1) {
+ regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP0_REG, 0x0F0E0D0C);
+ regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP1_REG, 0x0B0A0908);
+ regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP2_REG, 0x07060504);
+ regmap_write(i2s->regmap, SUN50I_R329_I2S_RX_CHAN_MAP3_REG, 0x03020100);
+ } else {
+ regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP0_REG, 0xFEDCBA98);
+ regmap_write(i2s->regmap, SUN50I_H6_I2S_RX_CHAN_MAP1_REG, 0x76543210);
+ }
/* Configure the channels */
regmap_update_bits(i2s->regmap, SUN50I_H6_I2S_TX_CHAN_SEL_REG(0),
@@ -1255,7 +1265,7 @@ static const struct regmap_config sun50i_h6_i2s_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .max_register = SUN50I_H6_I2S_RX_CHAN_MAP1_REG,
+ .max_register = SUN50I_R329_I2S_RX_CHAN_MAP3_REG,
.cache_type = REGCACHE_FLAT,
.reg_defaults = sun50i_h6_i2s_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(sun50i_h6_i2s_reg_defaults),
@@ -1440,6 +1450,26 @@ static const struct sun4i_i2s_quirks sun50i_h6_i2s_quirks = {
.set_fmt = sun50i_h6_i2s_set_soc_fmt,
};
+static const struct sun4i_i2s_quirks sun50i_r329_i2s_quirks = {
+ .has_reset = true,
+ .reg_offset_txdata = SUN8I_I2S_FIFO_TX_REG,
+ .sun4i_i2s_regmap = &sun50i_h6_i2s_regmap_config,
+ .field_clkdiv_mclk_en = REG_FIELD(SUN4I_I2S_CLK_DIV_REG, 8, 8),
+ .field_fmt_wss = REG_FIELD(SUN4I_I2S_FMT0_REG, 0, 2),
+ .field_fmt_sr = REG_FIELD(SUN4I_I2S_FMT0_REG, 4, 6),
+ .num_din_pins = 4,
+ .num_dout_pins = 4,
+ .bclk_dividers = sun8i_i2s_clk_div,
+ .num_bclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
+ .mclk_dividers = sun8i_i2s_clk_div,
+ .num_mclk_dividers = ARRAY_SIZE(sun8i_i2s_clk_div),
+ .get_bclk_parent_rate = sun8i_i2s_get_bclk_parent_rate,
+ .get_sr = sun8i_i2s_get_sr_wss,
+ .get_wss = sun8i_i2s_get_sr_wss,
+ .set_chan_cfg = sun50i_h6_i2s_set_chan_cfg,
+ .set_fmt = sun50i_h6_i2s_set_soc_fmt,
+};
+
static int sun4i_i2s_init_regmap_fields(struct device *dev,
struct sun4i_i2s *i2s)
{
@@ -1612,6 +1642,10 @@ static const struct of_device_id sun4i_i2s_match[] = {
.compatible = "allwinner,sun50i-h6-i2s",
.data = &sun50i_h6_i2s_quirks,
},
+ {
+ .compatible = "allwinner,sun50i-r329-i2s",
+ .data = &sun50i_r329_i2s_quirks,
+ },
{}
};
MODULE_DEVICE_TABLE(of, sun4i_i2s_match);
--
2.33.1
More information about the Alsa-devel
mailing list