[PATCH 2/4] ASoC: wm8940: Rewrite code to set proper clocks

[Lukasz Majewski]

Hi Charles,

> On Wed, Dec 14, 2022 at 01:37:41PM +0100, Lukasz Majewski wrote:
> > Without this change, the wm8940 driver is not working when
> > set_sysclk callback (wm8940_set_dai_sysclk) is called with
> > frequency not listed in the switch clause.
> > 
> > This change adjusts this driver to allow non-standard frequency
> > set (just after the boot) being adjusted afterwards by the sound
> > system core code.
> > 
> > Moreover, support for internal wm8940's PLL is provided, so it
> > can generate clocks when HOST system is not able to do it.
> > 
> > Code in this commit is based on previous change done for wm8974
> > (SHA1: 51b2bb3f2568e6d9d81a001d38b8d70c2ba4af99).
> > 
> > Signed-off-by: Lukasz Majewski <lukma at denx.de>
> > ---
> >  	struct snd_soc_component *component = dai->component;
> > +	struct wm8940_priv *priv =
> > snd_soc_component_get_drvdata(component); u16 iface =
> > snd_soc_component_read(component, WM8940_IFACE) & 0xFD9F; u16
> > addcntrl = snd_soc_component_read(component, WM8940_ADDCNTRL) &
> > 0xFFF1; u16 companding =  snd_soc_component_read(component,
> > WM8940_COMPANDINGCTL) & 0xFFDF; int ret;
> >  
> > +	priv->fs = params_rate(params);
> > +	ret = wm8940_update_clocks(dai);
> > +	if (ret)
> > +		return ret;
> > +  
> 
> I think this all looks mostly good, my only slight concern would
> be the interaction with the manual functions for settings the PLL
> etc. I guess under this code, whatever manual settings were
> configured

At least on my system - those settings are not set manually. Everythig
is done in the kernel.

This is important, as I do may use several other wm89* codecs, which
drivers are inserted as modules.

> will be overwritten with the new auto settings, I
> think this should be fine as the PLL wants to be run in a pretty
> narrow band anyway, so the settings are likely identical. Do you
> have any thoughts?

This code just follows changes done for WM8974 codec. I would leave the
code as it is in this patch.

> 
> Thanks,
> Charles



Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://mailman.alsa-project.org/pipermail/alsa-devel/attachments/20221214/896f67d5/attachment.sig>