missing sound on kernel-5.15

Takashi Iwai tiwai at suse.de
Wed Aug 31 10:04:22 CEST 2022 

On Wed, 31 Aug 2022 09:03:03 +0200,
chihhao chen wrote:
> 
> Hi Takashi,
> 
> I will try to insall ALSA tools.
> 
> I am testing these typec headsets on ARM8 smart phone platform. Because
> most x86 laptops support only 3.5mm input, I cannot test these typec
> devices.

Hm, but it's a USB-audio device, can't it just be plugged to a
laptop...?

> This problem should have something to do with host. 
> If I remove configure_endpoints() in snd_usb_hw_params() like k5.10
> behavior, this problem does not happen. It seems that to set frequency
> multiple times leads to headset abnormal phenomenon.

I understand that part, but it's still weird.  IIUC, it happens after
closing the previous stream and start a new stream, right?  Then can
you play two different rates on 5.10 kernel; e.g. at first call
snd_pcm_prepare with a high rate and stop/close immediately.  Then
start quickly the stream in a normal rate again.  That should issue
the sample rate changes in a similar way, and this should cause the
same problem, if it's really about the call of endpoint / rate
setups.

Or if it's more or less a timing issue, you might try to apply the
delay quirk such as QUIRK_FLAG_CTL_MSG_DELAY_XXX or
QUIRK_FLAG_IFACE_DELAY.


Takashi

> Thanks 
> 
> On Wed, 2022-08-31 at 07:18 +0200, Takashi Iwai wrote:
> > On Wed, 31 Aug 2022 05:39:56 +0200,
> > chihhao chen wrote:
> > > 
> > > Hi Takashi,
> > > 
> > > Yes they all show the same phenomenon : missing first sound
> > > randomly
> > > when users start playback.
> > 
> > Ah, that's what I misunderstood: I thought the output were completely
> > missing.
> > 
> > > I tried to run alsa-info.sh but got "This script requires amixer
> > > utility to continue" message.
> > 
> > Too bad.  Any chance to install those standard ALSA tools?
> > 
> > > For Samsung USB C Earphone UAC1 device, I tested not to set
> > > 96000(highest rate) but 48000 twice and this issue still
> > > happened.(Original behavior : set 96000 then set 48000 -> Try to
> > > set
> > > 48000 then set 48000 instead) So I think the problem might be
> > > related
> > > to setting frequency multiple times.
> > > 
> > > For Apple USB-C to 3.5mm Headphone Jack Adapter UAC3 device, I
> > > confirmed its badd_profile is UAC3_FUNCTION_SUBCLASS_HEADPHONE so
> > > it
> > > will not go into QUIRK_FLAG_VALIDATE_RATES quirk function. 
> > > Besides its initialization sequence in k5.15 is to set 48000 twice
> > > and
> > > because this rate works well in k5.10, do I still need to set lower
> > > rate to test?
> > 
> > In that case, better to test a few other options.
> > 
> > But before going in that way, let's check whether the problem depends
> > on the host or not.  Which host are you testing?  An ARM system?
> > Does the problem happen with the same USB-audio device on another 
> > machine (e.g. x86 laptop)?
> > 
> > 
> > Takashi
> > 
> > > 
> > > Thanks
> > > 
> > > On Tue, 2022-08-30 at 10:24 +0200, Takashi Iwai wrote:
> > > > On Tue, 30 Aug 2022 10:08:51 +0200,
> > > > chihhao chen wrote:
> > > > > 
> > > > > Hi Takashi,
> > > > > 
> > > > > I also think it should be a firmware problem but it happens
> > > > > with
> > > > > many
> > > > > different devices because of new set sampling rate behavior in
> > > > > k5.15.
> > > > > 
> > > > > Device 1 UAC1
> > > > > [  134.924359][T1000005] kworker/0:0: usb 1-1:
> > > > > [name:usbcore&]New
> > > > > USB
> > > > > device found, idVendor=04e8, idProduct=a04f, bcdDevice= 1.00
> > > > > [  134.925944][T1000005] kworker/0:0: usb 1-1:
> > > > > [name:usbcore&]New
> > > > > USB
> > > > > device strings: Mfr=1, Product=2, SerialNumber=3
> > > > > [  134.927338][T1000005] kworker/0:0: usb 1-1:
> > > > > [name:usbcore&]Product:
> > > > > Samsung USB C Earphone
> > > > > [  134.928426][T1000005] kworker/0:0: usb 1-1:
> > > > > [name:usbcore&]Manufacturer: bestechnic
> > > > > [  134.929432][T1000005] kworker/0:0: usb 1-1:
> > > > > [name:usbcore&]SerialNumber: 20160406.1
> > > > 
> > > > Does this show the same problem?  If so, that's interesting
> > > > because
> > > > UAC1 has a completely different way of setting the sample rate.
> > > > 
> > > > > Device 2 UAC3
> > > > > [  779.645324][T1003414] kworker/0:1: usb 1-1:
> > > > > [name:usbcore&]New
> > > > > USB
> > > > > device found, idVendor=05ac, idProduct=110a, bcdDevice=26.11
> > > > > [  779.647376][T1003414] kworker/0:1: usb 1-1:
> > > > > [name:usbcore&]New
> > > > > USB
> > > > > device strings: Mfr=1, Product=2, SerialNumber=3
> > > > > [  779.649492][T1003414] kworker/0:1: usb 1-1:
> > > > > [name:usbcore&]Product:
> > > > > USB-C to 3.5mm Headphone Jack Adapter
> > > > > [  779.652262][T1003414] kworker/0:1: usb 1-1:
> > > > > [name:usbcore&]Manufacturer: Apple, Inc.
> > > > > [  779.652273][T1003414] kworker/0:1: usb 1-1:
> > > > > [name:usbcore&]SerialNumber: DWH126301CLJKLTAF
> > > > > Device 3
> > > > > A XiaoMi adapter but it not in my hand now.
> > > > > 
> > > > > I will try to integrate k5.19 into my codebase.
> > > > 
> > > > At best, please give the alsa-info.sh output from each device.
> > > > Run the script with --no-upload option and attach the output.
> > > > 
> > > > Then try to test whether the reported highest sample rate
> > > > actually
> > > > works as-is.  That is, to see whether the problem is really about
> > > > issuing the frequency change multiple times for different rates,
> > > > or
> > > > it's because issuing the highest rate screws up the device.
> > > > 
> > > > And, for UAC2/3 devices, it might be worth to try some known
> > > > quirks,
> > > > e.g. QUIRK_FLAG_VALIDATE_RATES, which was needed for MOTU (UAC2)
> > > > devices.  It's a bit 12 of quirk_flags option value.
> > > > 
> > > > 
> > > > Takashi
> > > > 
> > > > > 
> > > > > Thanks
> > > > > 
> > > > > 
> > > > > On Tue, 2022-08-30 at 09:02 +0200, Takashi Iwai wrote:
> > > > > > On Tue, 30 Aug 2022 08:13:44 +0200,
> > > > > > chihhao chen wrote:
> > > > > > > 
> > > > > > > Hi Takashi,
> > > > > > > 
> > > > > > > I tried the patch but this problem still happens.
> > > > > > > 
> > > > > > > I add some logs in snd_usb_init_sample_rate() in kernel-
> > > > > > > 5.10
> > > > > > > [  146.260105][T1702328] writer: usb 1-1:
> > > > > > > [name:snd_usb_audio&]2:2
> > > > > > > Set
> > > > > > > sample rate 96000, clock 0 protocol 0
> > > > > > > [  146.289892][T1002328] writer: usb 1-1:
> > > > > > > [name:snd_usb_audio&]2:2
> > > > > > > Set
> > > > > > > sample rate 48000, clock 0 protocol 0
> > > > > > > 
> > > > > > > Because TinyAlsa tends to set highest rate for
> > > > > > > initialization
> > > > > > > and
> > > > > > > real
> > > > > > > rate for playback, it will still trigger two-times
> > > > > > > SAMPLING_FREQ_CONTROL USB requests.
> > > > > > 
> > > > > > Then this is a firmware problem of your device.
> > > > > > The same problem would happen even with the old kernel if you
> > > > > > run
> > > > > > the
> > > > > > application with different sample rates.  Does the device
> > > > > > work
> > > > > > with
> > > > > > 96kHz at all?
> > > > > > 
> > > > > > Could you give the lsusb -v output of the device, too?
> > > > > > 
> > > > > > > Which kernel version should I try? kernel-5.19 or?
> > > > > > 
> > > > > > Yes, 5.19 should suffice.
> > > > > > 
> > > > > > 
> > > > > > Takashi
>

More information about the Alsa-devel mailing list