[PATCH v8 1/2] ASoC: sunxi: Add Allwinner H6 Digital MIC driver
班涛
fengzheng923 at gmail.com
Tue Aug 23 17:08:44 CEST 2022
Samuel Holland <samuel at sholland.org> 于2022年8月20日周六 14:57写道：
> On 8/11/22 9:49 AM, Ban Tao wrote:
> > The Allwinner H6 and later SoCs have an DMIC block
> > which is capable of capture.
> >
> > Signed-off-by: Ban Tao <fengzheng923 at gmail.com>
>
> First of all, I tested this driver on the Lichee RV 86 Panel (the only
> board I
> have with DMIC hardware), and it works great, so:
>
> Tested-by: Samuel Holland <samuel at sholland.org>
>
> > ---
> > v1->v2:
> > 1.Fix some compilation errors.
> > 2.Modify some code styles.
> >
> > v2->v3:
> > None.
> >
> > v3->v4:
> > 1.add sig_bits.
> >
> > v4->v5:
> > None.
> >
> > v5->v6:
> > 1.Modify RXFIFO_CTL_MODE to mode 1.
> >
> > v6->v7:
> > 1.Modify dmic_rate_s to be a global variable.
> > 2.Changed some macro names to make more sense.
> > 3.Align code format.
> > 4.Add a depends on PM to Kconfig entry.
> >
> > v7->v8:
> > None.
> > ---
> > MAINTAINERS | 7 +
> > sound/soc/sunxi/Kconfig | 8 +
> > sound/soc/sunxi/Makefile | 1 +
> > sound/soc/sunxi/sun50i-dmic.c | 405
> ++++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 421 insertions(+)
> > create mode 100644 sound/soc/sunxi/sun50i-dmic.c
> >
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index e9d5b05..839f625 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -796,6 +796,13 @@ L: linux-media at vger.kernel.org
> > S: Maintained
> > F: drivers/staging/media/sunxi/cedrus/
> >
> > +ALLWINNER DMIC DRIVERS
> > +M: Ban Tao <fengzheng923 at gmail.com>
> > +L: alsa-devel at alsa-project.org (moderated for non-subscribers)
> > +S: Maintained
> > +F:
> Documentation/devicetree/bindings/sound/allwinner,sun50i-h6-dmic.yaml
> > +F: sound/soc/sunxi/sun50i-dmic.c
> > +
> > ALPHA PORT
> > M: Richard Henderson <rth at twiddle.net>
> > M: Ivan Kokshaysky <ink at jurassic.park.msu.ru>
> > diff --git a/sound/soc/sunxi/Kconfig b/sound/soc/sunxi/Kconfig
> > index ddcaaa9..8543234 100644
> > --- a/sound/soc/sunxi/Kconfig
> > +++ b/sound/soc/sunxi/Kconfig
> > @@ -56,6 +56,14 @@ config SND_SUN4I_SPDIF
> > Say Y or M to add support for the S/PDIF audio block in the
> Allwinner
> > A10 and affiliated SoCs.
> >
> > +config SND_SUN50I_DMIC
> > + tristate "Allwinner H6 DMIC Support"
> > + depends on (OF && PM && ARCH_SUNXI) || COMPILE_TEST
>
> You do not need any of these dependencies. The driver compiles fine with
> !OF,
> and runs fine with !PM. The "ARCH_SUNXI || COMPILE_TEST" dependency is
> already
> covered by the "menu" line at the top of the file.
>
OK! I will delete OF and PM in next version.
>
> (In a previous version, Maxime suggested adding a PM dependency and
> removing the
> fallback code. Since you kept the fallback code, you do not need the PM
> dependency.)
>
> > + select SND_SOC_GENERIC_DMAENGINE_PCM
> > + help
> > + Say Y or M to add support for the DMIC audio block in the
> Allwinner
> > + H6 and affiliated SoCs.
> > +
> > config SND_SUN8I_ADDA_PR_REGMAP
> > tristate
> > select REGMAP
> > diff --git a/sound/soc/sunxi/Makefile b/sound/soc/sunxi/Makefile
> > index a86be34..4483fe9 100644
> > --- a/sound/soc/sunxi/Makefile
> > +++ b/sound/soc/sunxi/Makefile
> > @@ -6,3 +6,4 @@ obj-$(CONFIG_SND_SUN8I_CODEC_ANALOG) +=
> sun8i-codec-analog.o
> > obj-$(CONFIG_SND_SUN50I_CODEC_ANALOG) += sun50i-codec-analog.o
> > obj-$(CONFIG_SND_SUN8I_CODEC) += sun8i-codec.o
> > obj-$(CONFIG_SND_SUN8I_ADDA_PR_REGMAP) += sun8i-adda-pr-regmap.o
> > +obj-$(CONFIG_SND_SUN50I_DMIC) += sun50i-dmic.o
> > diff --git a/sound/soc/sunxi/sun50i-dmic.c
> b/sound/soc/sunxi/sun50i-dmic.c
> > new file mode 100644
> > index 0000000..76b3378
> > --- /dev/null
> > +++ b/sound/soc/sunxi/sun50i-dmic.c
> > @@ -0,0 +1,405 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +//
> > +// This driver supports the DMIC in Allwinner's H6 SoCs.
> > +//
> > +// Copyright 2021 Ban Tao <fengzheng923 at gmail.com>
> > +
> > +#include <linux/clk.h>
> > +#include <linux/device.h>
> > +#include <linux/of_device.h>
> > +#include <linux/module.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/reset.h>
> > +#include <sound/dmaengine_pcm.h>
> > +#include <sound/pcm_params.h>
> > +#include <sound/soc.h>
> > +
> > +#define SUN50I_DMIC_EN_CTL (0x00)
> > + #define SUN50I_DMIC_EN_CTL_GLOBE BIT(8)
> > + #define SUN50I_DMIC_EN_CTL_CHAN(v) ((v) << 0)
> > + #define SUN50I_DMIC_EN_CTL_CHAN_MASK GENMASK(7, 0)
> > +#define SUN50I_DMIC_SR (0x04)
> > + #define SUN50I_DMIC_SR_SAMPLE_RATE(v) ((v) << 0)
> > + #define SUN50I_DMIC_SR_SAMPLE_RATE_MASK GENMASK(2, 0)
> > +#define SUN50I_DMIC_CTL (0x08)
> > + #define SUN50I_DMIC_CTL_OVERSAMPLE_RATE BIT(0)
> > +#define SUN50I_DMIC_DATA (0x10)
> > +#define SUN50I_DMIC_INTC (0x14)
> > + #define SUN50I_DMIC_FIFO_DRQ_EN BIT(2)
> > +#define SUN50I_DMIC_INT_STA (0x18)
> > + #define SUN50I_DMIC_INT_STA_OVERRUN_IRQ_PENDING BIT(1)
> > + #define SUN50I_DMIC_INT_STA_DATA_IRQ_PENDING BIT(0)
>
> Please consistently use tabs (not spaces) for aligning the macro values.
> You
> have a mix here.
>
> > +#define SUN50I_DMIC_RXFIFO_CTL (0x1c)
> > + #define SUN50I_DMIC_RXFIFO_CTL_FLUSH BIT(31)
> > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MASK BIT(9)
> > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_LSB (0 << 9)
> > + #define SUN50I_DMIC_RXFIFO_CTL_MODE_MSB (1 << 9)
> > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK BIT(8)
> > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16 (0 << 8)
> > + #define SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24 (1 << 8)
> > +#define SUN50I_DMIC_CH_NUM (0x24)
> > + #define SUN50I_DMIC_CH_NUM_N(v) ((v) << 0)
> > + #define SUN50I_DMIC_CH_NUM_N_MASK GENMASK(2, 0)
> > +#define SUN50I_DMIC_CNT (0x2c)
> > + #define SUN50I_DMIC_CNT_N BIT(0)
>
> This is a count of samples, not a bit mask, so the BIT() macro is
> misleading here.
>
> > +#define SUN50I_DMIC_HPF_CTRL (0x38)
> > +#define SUN50I_DMIC_VERSION (0x50)
> > +
> > +struct sun50i_dmic_dev {
> > + struct clk *dmic_clk;
> > + struct clk *bus_clk;
> > + struct reset_control *rst;
> > + struct regmap *regmap;
> > + struct snd_dmaengine_dai_dma_data dma_params_rx;
> > +};
> > +
> > +struct dmic_rate {
> > + unsigned int samplerate;
> > + unsigned int rate_bit;
> > +};
> > +
> > +static struct dmic_rate dmic_rate_s[] = {
>
> Please make this const.
>
> > + {48000, 0x0},
> > + {44100, 0x0},
> > + {32000, 0x1},
> > + {24000, 0x2},
> > + {22050, 0x2},
> > + {16000, 0x3},
> > + {12000, 0x4},
> > + {11025, 0x4},
> > + {8000, 0x5},
> > +};
> > +
> > +static int sun50i_dmic_startup(struct snd_pcm_substream *substream,
> > + struct snd_soc_dai *cpu_dai)
> > +{
> > + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > + struct sun50i_dmic_dev *host =
> snd_soc_dai_get_drvdata(asoc_rtd_to_cpu(rtd, 0));
> > +
> > + /* only support capture */
> > + if (substream->stream != SNDRV_PCM_STREAM_CAPTURE)
> > + return -EINVAL;
> > +
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
> > + SUN50I_DMIC_RXFIFO_CTL_FLUSH,
> > + SUN50I_DMIC_RXFIFO_CTL_FLUSH);
> > + regmap_write(host->regmap, SUN50I_DMIC_CNT, SUN50I_DMIC_CNT_N);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun50i_dmic_hw_params(struct snd_pcm_substream *substream,
> > + struct snd_pcm_hw_params *params,
> > + struct snd_soc_dai *cpu_dai)
> > +{
> > + int i = 0;
> > + unsigned long rate = params_rate(params);
> > + unsigned int mclk = 0;
> > + unsigned int channels = params_channels(params);
> > + unsigned int chan_en = (1 << channels) - 1;
> > + struct sun50i_dmic_dev *host = snd_soc_dai_get_drvdata(cpu_dai);
> > +
> > + /* DMIC num is N+1 */
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_CH_NUM,
> > + SUN50I_DMIC_CH_NUM_N_MASK,
> > + SUN50I_DMIC_CH_NUM_N(channels - 1));
> > + regmap_write(host->regmap, SUN50I_DMIC_HPF_CTRL, chan_en);
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_EN_CTL,
> > + SUN50I_DMIC_EN_CTL_CHAN_MASK,
> > + SUN50I_DMIC_EN_CTL_CHAN(chan_en));
> > +
> > + switch (params_format(params)) {
> > + case SNDRV_PCM_FORMAT_S16_LE:
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
> > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK,
> > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_16);
> > + break;
> > + case SNDRV_PCM_FORMAT_S24_LE:
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
> > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_MASK,
> > + SUN50I_DMIC_RXFIFO_CTL_SAMPLE_24);
> > + break;
> > + default:
> > + dev_err(cpu_dai->dev, "Invalid format!\n");
> > + return -EINVAL;
> > + }
> > + regmap_update_bits(host->regmap, SUN50I_DMIC_RXFIFO_CTL,
> > + SUN50I_DMIC_RXFIFO_CTL_MODE_MASK,
> > + SUN50I_DMIC_RXFIFO_CTL_MODE_MSB);
>
> I checked the manuals again, and I may have given you bad information.
> There
> appear to be two variants of the DMIC hardware.
>
> A63, H6, V5 V100, and V5x6 manuals list Mode 1 as "reserved" for a 24-bit
> sample
> resolution. The newer SoCs (A50, A133, D1, H616, and R329) describe Mode 1
> as
> extending the 21-bit sample with three zeros at the LSB to make 24 bits,
> which
> is what we want.
>
> On my D1 board, recording in S24_LE gives me good audio data, with
> equivalent
> loudness to S16_LE, as I would expect. If this also works on older SoCs
> like H6,
> then the manual is wrong, and the driver is fine.
>
>
I checked the H6 manual, DMIC also supports 24bits. The H6 SoC works fine
in mode 1. I don't know where your manual came from, mine is provided by
SUNXI.
However, if recording in S24_LE does not work on H6, then we will need to
> limit
> the driver to only S16_LE on H6. We could enable S24_LE on later SoCs with
> a
> separate compatible string.
>
> Please, can you test S24_LE on one of the older SoCs? (or let me know how
> it
> works if you have already tested it)
>
> The rest of the driver looks good to me.
>
> Regards,
> Samuel
>
More information about the Alsa-devel
mailing list