[PATCH] ASoC: codes: src4xxx: Avoid clang -Wsometimes-uninitialized in src4xxx_hw_params()
Matt Flax
flatmax at flatmax.com
Tue Aug 23 00:00:07 CEST 2022
Hi Nathan,
On 23/8/22 04:31, Nathan Chancellor wrote:
> Clang warns:
>
> sound/soc/codecs/src4xxx.c:280:3: error: variable 'd' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
> default:
> ^~~~~~~
> sound/soc/codecs/src4xxx.c:298:59: note: uninitialized use occurs here
> ret = regmap_write(src4xxx->regmap, SRC4XXX_RCV_PLL_11, d);
> ^
> sound/soc/codecs/src4xxx.c:223:20: note: initialize the variable 'd' to silence this warning
> int val, pj, jd, d;
> ^
> = 0
If you really want to get rid of these warnings, you can use this
default for the variables :
pj = 0x0;
jd=0xff;
d = 0xff;
It doesn't really make sense why we would choose to initialise these
variables, but if you want to silence the preprocessor, then perhaps
those values. Put a message that defaults are not known nor specified in
the data sheet and these values are chosen to be unlikely matches of
real world values - which ensures regmap updates later from an initial
unknown chip state after refresh. All a bit messy really.
> According to the comment in the default case, other parts of the chip
> are still functional without these values so just return 0 in the
> default case to avoid using these variables uninitialized.
>
> Link: https://github.com/ClangBuiltLinux/linux/issues/1691
> Reported-by: kernel test robot <lkp at intel.com>
> Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee at gmail.com>
> Signed-off-by: Nathan Chancellor <nathan at kernel.org>
> ---
> sound/soc/codecs/src4xxx.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/sound/soc/codecs/src4xxx.c b/sound/soc/codecs/src4xxx.c
> index a8f143057b41..cf45caa4bf7f 100644
> --- a/sound/soc/codecs/src4xxx.c
> +++ b/sound/soc/codecs/src4xxx.c
> @@ -283,7 +283,7 @@ static int src4xxx_hw_params(struct snd_pcm_substream *substream,
> */
> dev_info(component->dev,
> "Couldn't set the RCV PLL as this master clock rate is unknown\n");
> - break;
> + return 0;
Don't return here, the rest of the chip is still functional and probably
in use. Print the dev_info and continue.
More information about the Alsa-devel
mailing list