[PATCH] ASoC: soc-utils: Improve kerneldoc for snd_soc_tdm_params_to_bclk()

[Richard Fitzgerald]

The statement that snd_soc_tdm_params_to_bclk() is equivalent to
snd_soc_params_to_bclk() if tdm_width==tdm_slots==0 is not accurate,
it is only true is slot_multiple is also <2.

However, the description of special-case behaviour in terms of pairs of
tdm_width and tdm_slot values is not particularly helpful so we might as
well take the opportunity to rework the description to say the same thing
in a simpler way. The behaviour of a pair of values is obvious from a
description of each argument. At the same time make a few edits to clarify
the rest of the description.

Signed-off-by: Richard Fitzgerald <rf at opensource.cirrus.com>
---
 sound/soc/soc-utils.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c
index 70c380c0ac7b..a3b6df2378b4 100644
--- a/sound/soc/soc-utils.c
+++ b/sound/soc/soc-utils.c
@@ -56,23 +56,24 @@ EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk);
 /**
  * snd_soc_tdm_params_to_bclk - calculate bclk from params and tdm slot info.
  *
- * Calculate the bclk from the params sample rate and the tdm slot count and
- * tdm slot width. Either or both of tdm_width and tdm_slots can be 0.
+ * Calculate the bclk from the params sample rate, the tdm slot count and the
+ * tdm slot width. Optionally round-up the slot count to a given multiple.
+ * Either or both of tdm_width and tdm_slots can be 0.
  *
- * If tdm_width == 0 and tdm_slots > 0:	the params_width will be used.
- * If tdm_width > 0 and tdm_slots == 0:	the params_channels will be used
- *					as the slot count.
- * Both tdm_width and tdm_slots are 0:	this is equivalent to calling
- *					snd_soc_params_to_bclk().
+ * If tdm_width == 0:	use params_width() as the slot width.
+ * If tdm_slots == 0:	use params_channels() as the slot count.
  *
- * If slot_multiple > 1 the slot count (or params_channels if tdm_slots == 0)
- * will be rounded up to a multiple of this value. This is mainly useful for
+ * If slot_multiple > 1 the slot count (or params_channels() if tdm_slots == 0)
+ * will be rounded up to a multiple of slot_multiple. This is mainly useful for
  * I2S mode, which has a left and right phase so the number of slots is always
  * a multiple of 2.
  *
+ * If tdm_width == 0 && tdm_slots == 0 && slot_multiple < 2, this is equivalent
+ * to calling snd_soc_params_to_bclk().
+ *
  * @params:        Pointer to struct_pcm_hw_params.
- * @tdm_width:     Width in bits of the tdm slots.
- * @tdm_slots:     Number of tdm slots per frame.
+ * @tdm_width:     Width in bits of the tdm slots. Must be >= 0.
+ * @tdm_slots:     Number of tdm slots per frame. Must be >= 0.
  * @slot_multiple: If >1 roundup slot count to a multiple of this value.
  *
  * Return: bclk frequency in Hz, else a negative error code if params format
-- 
2.30.2