[PATCH v2] dt-bindings: sound: tlv320aic3x: Convert to dtschema

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Aug 4 13:23:38 CEST 2022


On 03/08/2022 17:17, Jai Luthra wrote:
> Convert bindings for TI's TLV320AIC3x audio codecs to dtschema.
> 
> Signed-off-by: Jai Luthra <j-luthra at ti.com>
> ---
>  .../bindings/sound/ti,tlv320aic3x.yaml        | 158 ++++++++++++++++++
>  .../devicetree/bindings/sound/tlv320aic3x.txt |  97 -----------
>  2 files changed, 158 insertions(+), 97 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/tlv320aic3x.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
> new file mode 100644
> index 000000000000..f0ed856162ea
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/ti,tlv320aic3x.yaml
> @@ -0,0 +1,158 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/ti,tlv320aic3x.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TLV320AIC3x Codec
> +
> +description: |
> +  TLV320AIC3x are a series of low-power stereo audio codecs with stereo
> +  headphone amplifier, as well as multiple inputs and outputs programmable in
> +  single-ended or fully differential configurations.
> +
> +  The serial control bus supports SPI or I2C protocols, while the serial audio
> +  data bus is programmable for I2S, left/right-justified, DSP, or TDM modes.
> +
> +  The following pins can be referred in the sound node's audio routing property:
> +
> +  CODEC output pins:
> +     LLOUT
> +     RLOUT
> +     MONO_LOUT
> +     HPLOUT
> +     HPROUT
> +     HPLCOM
> +     HPRCOM
> +
> +  CODEC input pins for TLV320AIC3104:
> +     MIC2L
> +     MIC2R
> +     LINE1L
> +     LINE1R
> +
> +  CODEC input pins for other compatible codecs:
> +     MIC3L
> +     MIC3R
> +     LINE1L
> +     LINE2L
> +     LINE1R
> +     LINE2R
> +
> +maintainers:
> +  - Jai Luthra <j-luthra at ti.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,tlv320aic3x
> +      - ti,tlv320aic33
> +      - ti,tlv320aic3007
> +      - ti,tlv320aic3106
> +      - ti,tlv320aic3104
> +
> +  reg:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO specification for the active low RESET input.
> +
> +  gpio-reset:
> +    maxItems: 1
> +    description:
> +      Deprecated, please use reset-gpios instead.
> +    deprecated: true
> +
> +  ai3x-gpio-func:
> +    description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 2

No need for minItems if they equal to maxItems.

> +    maxItems: 2
> +

Except that, Rob's bot reports several other properties used in DTS. You
can document them in that commit - just mention in commit msg - or a
follow-up commit just for undocumented properties.

Best regards,
Krzysztof


More information about the Alsa-devel mailing list