[PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF

Aaro Koskinen aaro.koskinen at iki.fi
Wed Apr 6 22:00:10 CEST 2022


Hi,

On Wed, Apr 06, 2022 at 08:48:14PM +0200, Janusz Krzysztofik wrote:
> Dnia środa, 6 kwietnia 2022 15:21:49 CEST Aaro Koskinen pisze:
> > On Sat, Mar 26, 2022 at 10:17:49PM +0100, Janusz Krzysztofik wrote:
> > > Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze:
> > > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote:
> > > > > Something is still broken. When doing kexec (using CCF kernel), the
> > > > > kexec'ed kernel now hangs early (on 770):
> > > > [...]
> > > > > [    0.928863] calling  omap1_init_devices+0x0/0x2c @ 1
> > > > 
> > > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate()
> > > > <- omap1_clk_late_init()).
> > > 
> > > I've reviewed my changes but haven't found anything suspicious.
> > 
> > The below change is fixing the kexec boot. Based on the comment in the
> > code, it seems this clock is needed for the SRAM to work.
> > 
> > diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
> > index e33e11f826af..b8b4876ff935 100644
> > --- a/arch/arm/mach-omap1/clock_data.c
> > +++ b/arch/arm/mach-omap1/clock_data.c
> > @@ -285,7 +285,7 @@ static struct omap1_clk tc1_ck = {
> >   */
> >  
> >  static struct omap1_clk tc2_ck = {
> > -	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, 0),
> > +	.hw.init	= CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL),
> >  	.ops		= &clkops_generic,
> >  	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
> >  	.enable_bit	= EN_TC2_CK,
> > 
> > A.
> > 
> 
> Thank you Aaro.  Will you submit this as a separate fix, or should I submit 
> v2 of my patch 4/4 with your fix included?

Please send a new version with the fix included.

A.


More information about the Alsa-devel mailing list