[PATCH v2 4/5] ASoC: codecs: tx-macro: Update tx default values

[Srinivas Kandagatla]

On 22/09/2021 13:31, Srinivasa Rao Mandadapu wrote:
> Update mic control register default values to hardware reset values
> 
> Fixes: c39667ddcfc5 (ASoC: codecs: lpass-tx-macro: add support for lpass tx macro)
> 
> Signed-off-by: Venkata Prasad Potturu <potturu at codeaurora.org>
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam at codeaurora.org>
> ---
>   sound/soc/codecs/lpass-tx-macro.c | 6 +++---
>   1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/sound/soc/codecs/lpass-tx-macro.c b/sound/soc/codecs/lpass-tx-macro.c
> index e980b2e..66c39fb 100644
> --- a/sound/soc/codecs/lpass-tx-macro.c
> +++ b/sound/soc/codecs/lpass-tx-macro.c
> @@ -279,7 +279,7 @@ static const struct reg_default tx_defaults[] = {
>   	{ CDC_TX_CLK_RST_CTRL_SWR_CONTROL, 0x00},
>   	{ CDC_TX_TOP_CSR_TOP_CFG0, 0x00},
>   	{ CDC_TX_TOP_CSR_ANC_CFG, 0x00},
> -	{ CDC_TX_TOP_CSR_SWR_CTRL, 0x00},
> +	{ CDC_TX_TOP_CSR_SWR_CTRL, 0x60},

This does not make sense as this register only has one bit to control.
Why do we even need to change this, can you please explain what happens 
if we do not change this?

>   	{ CDC_TX_TOP_CSR_FREQ_MCLK, 0x00},
>   	{ CDC_TX_TOP_CSR_DEBUG_BUS, 0x00},
>   	{ CDC_TX_TOP_CSR_DEBUG_EN, 0x00},
> @@ -290,8 +290,8 @@ static const struct reg_default tx_defaults[] = {
>   	{ CDC_TX_TOP_CSR_SWR_DMIC1_CTL, 0x00},
>   	{ CDC_TX_TOP_CSR_SWR_DMIC2_CTL, 0x00},
>   	{ CDC_TX_TOP_CSR_SWR_DMIC3_CTL, 0x00},
> -	{ CDC_TX_TOP_CSR_SWR_AMIC0_CTL, 0x00},
> -	{ CDC_TX_TOP_CSR_SWR_AMIC1_CTL, 0x00},
> +	{ CDC_TX_TOP_CSR_SWR_AMIC0_CTL, 0x0E},
> +	{ CDC_TX_TOP_CSR_SWR_AMIC1_CTL, 0x0E},

These two registers should have default value of 0x06 as this has only 
one clk selection field with bits 2:1.

-srini


>   	{ CDC_TX_INP_MUX_ADC_MUX0_CFG0, 0x00},
>   	{ CDC_TX_INP_MUX_ADC_MUX0_CFG1, 0x00},
>   	{ CDC_TX_INP_MUX_ADC_MUX1_CFG0, 0x00},
>