[PATCH v3 2/3] ASoC: Use schema reference for sound-name-prefix

[Rob Herring]

On Fri, Sep 3, 2021 at 11:36 AM Sameer Pujar <spujar at nvidia.com> wrote:
>
> Use schema reference for 'sound-name-prefix' property wherever
> necessary.
>
> Signed-off-by: Sameer Pujar <spujar at nvidia.com>
> Cc: Jerome Brunet <jbrunet at baylibre.com>
> Cc: Stephan Gerhold <stephan at gerhold.net>
> Cc: Rob Herring <robh+dt at kernel.org>
> Reviewed-by: Jerome Brunet <jbrunet at baylibre.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> ---

[...]

> diff --git a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> index ffb8fcf..68e5ad2 100644
> --- a/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> +++ b/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
> @@ -9,6 +9,9 @@ title: NXP/Goodix TFA989X (TFA1) Audio Amplifiers
>  maintainers:
>    - Stephan Gerhold <stephan at gerhold.net>
>
> +allOf:
> +  - $ref: name-prefix.yaml#
> +
>  properties:
>    compatible:
>      enum:
> @@ -21,12 +24,6 @@ properties:
>    '#sound-dai-cells':
>      const: 0
>
> -  sound-name-prefix:

You can't remove the property. This is now a warning in linux-next:

Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec at 34: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
 From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml
Documentation/devicetree/bindings/sound/nxp,tfa989x.example.dt.yaml:
audio-codec at 36: 'sound-name-prefix' does not match any of the regexes:
'pinctrl-[0-9]+'
 From schema: /builds/robherring/linux-dt/Documentation/devicetree/bindings/sound/nxp,tfa989x.yaml


Just 'sound-name-prefix: true' is fine

> -    $ref: /schemas/types.yaml#/definitions/string
> -    description:
> -      Used as prefix for sink/source names of the component. Must be a
> -      unique string among multiple instances of the same component.
> -
>    vddd-supply:
>      description: regulator phandle for the VDDD power supply.
>
> diff --git a/Documentation/devicetree/bindings/sound/rt5659.txt b/Documentation/devicetree/bindings/sound/rt5659.txt
> index c473df5..013f534 100644
> --- a/Documentation/devicetree/bindings/sound/rt5659.txt
> +++ b/Documentation/devicetree/bindings/sound/rt5659.txt
> @@ -42,7 +42,7 @@ Optional properties:
>  - realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
>  - realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
>
> -- sound-name-prefix: Please refer to name-prefix.txt
> +- sound-name-prefix: Please refer to name-prefix.yaml
>
>  - ports: A Codec may have a single or multiple I2S interfaces. These
>    interfaces on Codec side can be described under 'ports' or 'port'.
> diff --git a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
> index 5986d1f..c597d9d 100644
> --- a/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
> +++ b/Documentation/devicetree/bindings/sound/simple-audio-mux.yaml
> @@ -13,6 +13,9 @@ description: |
>    Simple audio multiplexers are driven using gpios, allowing to select which of
>    their input line is connected to the output line.
>
> +allOf:
> +  - $ref: name-prefix.yaml#
> +
>  properties:
>    compatible:
>      const: simple-audio-mux
> @@ -21,12 +24,6 @@ properties:
>      description: |
>        GPIOs used to select the input line.
>
> -  sound-name-prefix:

Here too, but I guess we don't have any example to throw a warning?