[PATCH] ALSA: hda: Reduce udelay() at SKL+ position reporting

[Takashi Iwai]

The position reporting on Intel Skylake and later chips via
azx_get_pos_skl() contains a udelay(20) call for the capture streams.
A call for this alone doesn't sound too harmful.  However, as the
pointer PCM ops is one of the hottest path in the PCM operations --
especially for the timer-scheduled operations like PulseAudio -- such
a delay hogs CPU usage significantly in the total performance.

The function there was taken from the original code in ASoC SST
Skylake driver blindly.  The udelay() is a workaround for the case
where the reported position is behind the period boundary at the
timing triggered from interrupts; applications often expect that the
full data is available for the whole period when returned (and also
that's the definition of the ALSA PCM period).

OTOH, HD-audio (legacy) driver has already some workarounds for the
delayed position reporting due to its relatively large FIFO, such as
the BDL position adjustment and the delayed period-elapsed call in the
work.  That said, the udelay() is almost superfluous for HD-audio
driver unlike SST, and we can drop the udelay().

Though, the current code doesn't guarantee the full period readiness
as mentioned in the above, but rather it checks the wallclock and
detects the unexpected jump.  That's one missing piece, and the drop
of udelay() needs a bit more sanity checks for the delayed handling.

This patch implements those: the drop of udelay() call in
azx_get_pos_skl() and the more proper check of hwptr in
azx_position_ok().  The latter change is applied only for the case
where the stream is running in the normal mode without
no_period_wakeup flag.  When no_period_wakeup is set, it essentially
ignores the period handling and rather concentrates only on the
current position; which implies that we don't need to care about the
period boundary at all.

Fixes: f87e7f25893d ("ALSA: hda - Improved position reporting on SKL+")
Reported-by: Jens Axboe <axboe at kernel.dk>
Signed-off-by: Takashi Iwai <tiwai at suse.de>
---
 sound/pci/hda/hda_intel.c | 28 +++++++++++++++++++++++-----
 1 file changed, 23 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3aa432d814a2..faeeeb923d5e 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -637,13 +637,17 @@ static int azx_position_check(struct azx *chip, struct azx_dev *azx_dev)
  * the update-IRQ timing.  The IRQ is issued before actually the
  * data is processed.  So, we need to process it afterwords in a
  * workqueue.
+ *
+ * Returns 1 if OK to proceed, 0 for delay handling, -1 for skipping update
  */
 static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
 {
 	struct snd_pcm_substream *substream = azx_dev->core.substream;
+	struct snd_pcm_runtime *runtime = substream->runtime;
 	int stream = substream->stream;
 	u32 wallclk;
 	unsigned int pos;
+	snd_pcm_uframes_t hwptr, target;
 
 	wallclk = azx_readl(chip, WALLCLK) - azx_dev->core.start_wallclk;
 	if (wallclk < (azx_dev->core.period_wallclk * 2) / 3)
@@ -680,6 +684,24 @@ static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
 		/* NG - it's below the first next period boundary */
 		return chip->bdl_pos_adj ? 0 : -1;
 	azx_dev->core.start_wallclk += wallclk;
+
+	if (azx_dev->core.no_period_wakeup)
+		return 1; /* OK, no need to check period boundary */
+
+	if (runtime->hw_ptr_base != runtime->hw_ptr_interrupt)
+		return 1; /* OK, already in hwptr updating process */
+
+	/* check whether the period gets really elapsed */
+	pos = bytes_to_frames(runtime, pos);
+	hwptr = runtime->hw_ptr_base + pos;
+	if (hwptr < runtime->status->hw_ptr)
+		hwptr += runtime->buffer_size;
+	target = runtime->hw_ptr_interrupt + runtime->period_size;
+	if (hwptr < target) {
+		/* too early wakeup, process it later */
+		return chip->bdl_pos_adj ? 0 : -1;
+	}
+
 	return 1; /* OK, it's fine */
 }
 
@@ -874,11 +896,7 @@ static unsigned int azx_get_pos_skl(struct azx *chip, struct azx_dev *azx_dev)
 	if (azx_dev->core.substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		return azx_skl_get_dpib_pos(chip, azx_dev);
 
-	/* For capture, we need to read posbuf, but it requires a delay
-	 * for the possible boundary overlap; the read of DPIB fetches the
-	 * actual posbuf
-	 */
-	udelay(20);
+	/* read of DPIB fetches the actual posbuf */
 	azx_skl_get_dpib_pos(chip, azx_dev);
 	return azx_get_pos_posbuf(chip, azx_dev);
 }
-- 
2.26.2