[PATCH v5 17/21] ASoC: qdsp6: audioreach: add topology support
Pierre-Louis Bossart
pierre-louis.bossart at linux.intel.com
Fri Sep 3 17:31:33 CEST 2021
> +/**
> + * %AR_TKN_U32_SUB_GRAPH_INSTANCE_ID: Sub Graph Instance Id
> + *
> + * %AR_TKN_U32_SUB_GRAPH_PERF_MODE: Performance mode of subgraph
> + * APM_SUB_GRAPH_PERF_MODE_LOW_POWER = 1,
> + * APM_SUB_GRAPH_PERF_MODE_LOW_LATENCY = 2
> + *
> + * %AR_TKN_U32_SUB_GRAPH_DIRECTION: Direction of subgraph
> + * APM_SUB_GRAPH_DIRECTION_TX = 1,
> + * APM_SUB_GRAPH_DIRECTION_RX = 2
can you have full-duplex? unclear how you would define the direction in
the case of a voice call...
> + *
> + * %AR_TKN_U32_SUB_GRAPH_SCENARIO_ID: Scenario ID for subgraph
> + * APM_SUB_GRAPH_SID_AUDIO_PLAYBACK = 1,
> + * APM_SUB_GRAPH_SID_AUDIO_RECORD = 2,
> + * APM_SUB_GRAPH_SID_VOICE_CALL = 3
> + *
> + * %AR_TKN_U32_CONTAINER_INSTANCE_ID: Container Instance ID
> + *
> + * %AR_TKN_U32_CONTAINER_CAPABILITY_ID: Container capability ID
> + * APM_CONTAINER_CAP_ID_PP = 1,
> + * APM_CONTAINER_CAP_ID_CD = 2,
> + * APM_CONTAINER_CAP_ID_EP = 3,
> + * APM_CONTAINER_CAP_ID_OLC = 4
Acronyms? PP, CD, EP, OLC?
> + *
> + * %AR_TKN_U32_CONTAINER_STACK_SIZE: Stack size in the container.
> + *
> + * %AR_TKN_U32_CONTAINER_GRAPH_POS: Graph Position
> + * APM_CONT_GRAPH_POS_STREAM = 1,
> + * APM_CONT_GRAPH_POS_PER_STR_PER_DEV = 2,
> + * APM_CONT_GRAPH_POS_STR_DEV = 3,
> + * APM_CONT_GRAPH_POS_GLOBAL_DEV = 4
explain what this means?
> + *
> + * %AR_TKN_U32_CONTAINER_PROC_DOMAIN: Processor domain of container
> + * APM_PROC_DOMAIN_ID_MDSP = 1,
> + * APM_PROC_DOMAIN_ID_ADSP = 2,
> + * APM_PROC_DOMAIN_ID_SDSP = 4,
> + * APM_PROC_DOMAIN_ID_CDSP = 5
what happened to 3, is it reserved/illegal?
> + *
> + * %AR_TKN_U32_MODULE_ID: Module ID
> + *
> + * %AR_TKN_U32_MODULE_INSTANCE_ID: Module Instance ID.
> + *
> + * %AR_TKN_U32_MODULE_MAX_IP_PORTS: Module maximum input ports
> + *
> + * %AR_TKN_U32_MODULE_MAX_OP_PORTS: Module maximum output ports.
> + *
> + * %AR_TKN_U32_MODULE_IN_PORTS: Number of in ports
> + *
> + * %AR_TKN_U32_MODULE_OUT_PORTS: Number of out ports.
> + *
> + * %AR_TKN_U32_MODULE_SRC_OP_PORT_ID: Source module output port ID
> + *
> + * %AR_TKN_U32_MODULE_DST_IN_PORT_ID: Destination module input port ID
> + *
> + * %AR_TKN_U32_MODULE_HW_IF_IDX: Interface index types for I2S/LPAIF
> + *
> + * %AR_TKN_U32_MODULE_HW_IF_TYPE: Interface type
> + * LPAIF = 0,
> + * LPAIF_RXTX = 1,
> + * LPAIF_WSA = 2,
> + * LPAIF_VA = 3,
> + * LPAIF_AXI = 4
> + *
> + * %AR_TKN_U32_MODULE_FMT_INTERLEAVE: PCM Interleaving
> + * PCM_INTERLEAVED = 1,
> + * PCM_DEINTERLEAVED_PACKED = 2,
> + * PCM_DEINTERLEAVED_UNPACKED = 3
> + *
> + * %AR_TKN_U32_MODULE_FMT_DATA: data format
> + * FIXED POINT = 1,
> + * IEC60958 PACKETIZED = 3,
> + * IEC60958 PACKETIZED NON LINEAR = 8,
> + * COMPR OVER PCM PACKETIZED = 7,
> + * IEC61937 PACKETIZED = 2,
isn't this precisely compressed over PCM?
> + * GENERIC COMPRESSED = 5
??
> + *
> + * %AR_TKN_U32_MODULE_FMT_FREQ: bit rate
bit rate or frame rate (aka sampling frequency) ?
> + *
> + * %AR_TKN_U32_MODULE_FMT_BIT_DEPTH: bit depth
> +static struct audioreach_sub_graph *audioreach_parse_sg_tokens(struct q6apm *apm,
> + struct snd_soc_tplg_private *private)
> +{
> + struct audioreach_graph_info *info = NULL;
> + struct snd_soc_tplg_vendor_array *sg_array;
> + struct snd_soc_tplg_vendor_value_elem *sg_elem;
> + struct audioreach_sub_graph *sg;
> + int graph_id, sub_graph_id, tkn_count = 0;
> + bool found;
> +
> + sg_array = audioreach_get_sg_array(private);
> + sg_elem = sg_array->value;
> +
> + while (tkn_count <= (le32_to_cpu(sg_array->num_elems) - 1)) {
> + switch (le32_to_cpu(sg_elem->token)) {
> + case AR_TKN_U32_SUB_GRAPH_INSTANCE_ID:
> + sub_graph_id = le32_to_cpu(sg_elem->value);
> + sg = audioreach_tplg_alloc_sub_graph(apm, sub_graph_id, &found);
> + if (IS_ERR(sg)) {
> + return sg;
> + } else if (found) {
> + /* Already parsed data for this sub-graph */
> + return sg;
> + }
> + dev_err(apm->dev, "%s: New subgraph id : 0x%08x\n", __func__,
> + sub_graph_id);
> + break;
> + case AR_TKN_DAI_INDEX:
> + /* Sub graph is associated with predefined graph */
> + graph_id = le32_to_cpu(sg_elem->value);
> + info = audioreach_tplg_alloc_graph_info(apm, graph_id, &found);
> + if (IS_ERR(info))
> + return ERR_CAST(info);
> + break;
> + case AR_TKN_U32_SUB_GRAPH_PERF_MODE:
> + sg->perf_mode = le32_to_cpu(sg_elem->value);
> + break;
> + case AR_TKN_U32_SUB_GRAPH_DIRECTION:
> + sg->direction = le32_to_cpu(sg_elem->value);
> + break;
> + case AR_TKN_U32_SUB_GRAPH_SCENARIO_ID:
> + sg->scenario_id = le32_to_cpu(sg_elem->value);
> + break;
> + default:
> + dev_err(apm->dev, "Not a valid token %d for graph\n",
> + sg_elem->token);
> + break;
indentation is off
> +
> + }
> + tkn_count++;
> + sg_elem++;
> + }
> +
> + /* Sub graph is associated with predefined graph */
> + if (info) {
> + dev_err(apm->dev, "%s: adding subgraph id : 0x%08x -> %d\n", __func__,
> + sub_graph_id, graph_id);
> +
> + audioreach_tplg_add_sub_graph(sg, info);
> + }
> +
> + return sg;
> +}
> +
> +static struct audioreach_container *audioreach_parse_cont_tokens(struct q6apm *apm,
> + struct audioreach_sub_graph *sg,
> + struct snd_soc_tplg_private *private)
> +{
> + struct snd_soc_tplg_vendor_array *cont_array;
> + struct snd_soc_tplg_vendor_value_elem *cont_elem;
> + struct audioreach_container *cont;
> + int container_id, tkn_count = 0;
> + bool found = false;
> +
> + cont_array = audioreach_get_cont_array(private);
> + cont_elem = cont_array->value;
> +
> + while (tkn_count <= (le32_to_cpu(cont_array->num_elems) - 1)) {
> + switch (le32_to_cpu(cont_elem->token)) {
> + case AR_TKN_U32_CONTAINER_INSTANCE_ID:
> + container_id = le32_to_cpu(cont_elem->value);
> + cont = audioreach_tplg_alloc_container(apm, sg, container_id, &found);
> + if (IS_ERR(cont))
> + return ERR_PTR(-ENOMEM);
> + else if (found) /* Already parsed container data */
> + return cont;
> +
> + break;
> + case AR_TKN_U32_CONTAINER_CAPABILITY_ID:
> + cont->capability_id = le32_to_cpu(cont_elem->value);
> + break;
> + case AR_TKN_U32_CONTAINER_STACK_SIZE:
> + cont->stack_size = le32_to_cpu(cont_elem->value);
> + break;
> + case AR_TKN_U32_CONTAINER_GRAPH_POS:
> + cont->graph_pos = le32_to_cpu(cont_elem->value);
> + break;
> + case AR_TKN_U32_CONTAINER_PROC_DOMAIN:
> + cont->proc_domain = le32_to_cpu(cont_elem->value);
> + break;
> + default:
> + dev_err(apm->dev, "Not a valid token %d for graph\n",
> + cont_elem->token);
> + break;
indentation?
> +
> + }
> + tkn_count++;
> + cont_elem++;
> + }
> +
> + return cont;
> +}
> +
> +static struct audioreach_module *audioreach_find_widget(struct snd_soc_component *comp,
> + const char *name)
> +{
> + struct q6apm *apm = dev_get_drvdata(comp->dev);
> + struct audioreach_module *module;
> + int id = 0;
unnecessary init?
> +
> + idr_for_each_entry(&apm->modules_idr, module, id) {
> + if (!strcmp(name, module->widget->name))
> + return module;
> + }
> +
> + return NULL;
> +}
> +/* DAI link - used for any driver specific init */
> +static int audioreach_link_load(struct snd_soc_component *component, int index,
> + struct snd_soc_dai_link *link,
> + struct snd_soc_tplg_link_config *cfg)
> +{
> + link->nonatomic = true;
> + link->dynamic = true;
> + link->platforms->name = NULL;
> + link->platforms->of_node = of_get_compatible_child(component->dev->of_node,
> + "qcom,q6apm-dais");
> + link->trigger[0] = SND_SOC_DPCM_TRIGGER_POST;
> + link->trigger[1] = SND_SOC_DPCM_TRIGGER_POST;
can you add a comment on why you don't use the default order for FE/BE
triggers?
> +
> + return 0;
> +}
> +
> +static int audioreach_get_vol_ctrl_audio_mixer(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dapm_widget *dw = snd_soc_dapm_kcontrol_widget(kcontrol);
> + struct audioreach_module *mod = dw->dobj.private;
> +
> + /* Check if the graph is active or not */
that comment seems like a copy/paste, there's no check.
> + ucontrol->value.integer.value[0] = mod->gain;
> +
> + return 0;
> +}
> +
> +static int audioreach_put_vol_ctrl_audio_mixer(struct snd_kcontrol *kcontrol,
> + struct snd_ctl_elem_value *ucontrol)
> +{
> + struct snd_soc_dapm_widget *dw = snd_soc_dapm_kcontrol_widget(kcontrol);
> + struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kcontrol);
> + struct snd_soc_component *c = snd_soc_dapm_to_component(dapm);
> + struct audioreach_module *mod = dw->dobj.private;
> + struct q6apm *apm = dev_get_drvdata(c->dev);
> + int vol = ucontrol->value.integer.value[0];
> +
> + /* Check if the graph is active or not */
> + if (dw->power) {
> + audioreach_gain_set_vol_ctrl(apm, mod, vol);
> + mod->gain = vol;
> + return 1;
> + }
shouldn't you cache the value and apply it when the graph is powered?
Also wondering why this isn't using pm_runtime or something? Is this
re-inventing your own power management?
> +
> + dev_err(apm->dev, "Unable to set volume as graph is not active\n");
> + return 0;
> +
> +}
> +
> +static int audioreach_control_load_mix(struct snd_soc_component *scomp,
> + struct snd_ar_control *scontrol,
> + struct snd_kcontrol_new *kc,
> + struct snd_soc_tplg_ctl_hdr *hdr)
> +{
> + struct snd_soc_tplg_mixer_control *mc;
> + struct snd_soc_tplg_vendor_array *c_array;
> + struct snd_soc_tplg_vendor_value_elem *c_elem;
> + int tkn_count = 0;
> +
> + mc = container_of(hdr, struct snd_soc_tplg_mixer_control, hdr);
> + c_array = (struct snd_soc_tplg_vendor_array *)mc->priv.data;
> +
> + c_elem = c_array->value;
> +
> + while (tkn_count <= (le32_to_cpu(c_array->num_elems) - 1)) {
> + switch (le32_to_cpu(c_elem->token)) {
> + case AR_TKN_U32_SUB_GRAPH_INSTANCE_ID:
> + scontrol->sgid = le32_to_cpu(c_elem->value);
> + break;
> + default:
> + /* Ignore other tokens */
> + break;
indentation?
> +
> + }
> + c_elem++;
> + tkn_count++;
> + }
> +
> + return 0;
> +}
> +int audioreach_tplg_init(struct snd_soc_component *component)
> +{
> + struct device *dev = component->dev;
> + const struct firmware *fw;
> + int ret;
> +
> + ret = request_firmware(&fw, "audioreach.bin", dev);
> + if (ret < 0) {
> + dev_err(dev, "tplg fw audioreach.bin load failed with %d\n", ret);
> + return ret;
> + }
> +
> + ret = snd_soc_tplg_component_load(component, &audioreach_tplg_ops, fw);
> + if (ret < 0) {
> + dev_err(dev, "tplg component load failed%d\n", ret);
> + release_firmware(fw);
> + return -EINVAL;
> + }
should you not release the firmware on success as well? that's what we
do for SOF"
ret = snd_soc_tplg_component_load(scomp, &sof_tplg_ops, fw);
if (ret < 0) {
dev_err(scomp->dev, "error: tplg component load failed %d\n",
ret);
ret = -EINVAL;
}
release_firmware(fw);
return ret;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(audioreach_tplg_init);
>
More information about the Alsa-devel
mailing list